Busch-Jaeger Busch-Welcome IP User manual

2TMD042300D0041 │18.12.2023
Product manual
Busch-Welcome®IP
H8249-1. IP Touch Lite 7

Table of contents
Product manual
2TMD042300D0041
│
2
Table of c ontents
1Notes on the instruction manual............................................................................................................5
2Safety ..................................................................................................................................................5
3Intended use ........................................................................................................................................5
4Environment.........................................................................................................................................6
4.1 Busch-Jaeger devices................................................................................................................6
5Product description...............................................................................................................................7
5.1 Device type ...............................................................................................................................7
5.2 Control elements........................................................................................................................8
5.3 Terminal description...................................................................................................................9
6Technical data....................................................................................................................................10
7Mounting/Installation...........................................................................................................................11
7.1 Requirement for the electrician.................................................................................................11
7.2 Product dimensions .................................................................................................................12
7.3 Installation height.....................................................................................................................12
7.4 Surface-mounted installation ....................................................................................................13
7.4.1 Surface mounting box size.................................................................................................... 13
7.4.2 Surface mounted with the electrical accessory box................................................................. 13
7.5 Flush-mounted installation........................................................................................................14
7.6 Cavity wall installation ..............................................................................................................15
7.6.1 Desktop installation............................................................................................................... 15
7.7 Dismantling .............................................................................................................................16
8Commissioning...................................................................................................................................17
8.1 Wizard setup ...........................................................................................................................17
8.1.1 Configuration without SmartAP.............................................................................................. 20
8.1.2 Configuration via SmartAP.................................................................................................... 25
8.1.3 Configuration via SmartAP & APP ......................................................................................... 29
8.1.4 Creating a building structure on APP ..................................................................................... 35
8.1.5 Scanning the QR code on the panel ...................................................................................... 39
8.1.6 Importing the building structure from APP to SmartAP............................................................ 41
8.2 System settings .......................................................................................................................45
8.2.1 Accessing the "Settings" screen ............................................................................................ 45
8.2.2 Display settings .................................................................................................................... 46
8.2.3 Sound settings ..................................................................................................................... 49
8.2.4 Network settings................................................................................................................... 52
8.2.5 MyBuildings settings ............................................................................................................. 55
8.2.6 Time and date settings.......................................................................................................... 61
8.2.7 Changing advanced setting password.................................................................................... 62
8.2.8 Resetting advanced setting password.................................................................................... 63
8.2.9 Configuring unlock password ................................................................................................ 64
8.2.10 Language setting.................................................................................................................. 67
8.2.11 Automatic snapshots setting.................................................................................................. 68
8.2.12 Missed call setting ................................................................................................................ 69

Table of contents
Product manual
2TMD042300D0041
│
3
8.2.13 Linking call setting ................................................................................................................ 70
8.2.14 Resetting user settings ......................................................................................................... 72
8.2.15 Configuring Outdoor Station cameras .................................................................................... 74
8.2.16 Configuring private cameras.................................................................................................. 76
8.2.17 Configuring public cameras................................................................................................... 82
8.2.18 Configuring intercom list........................................................................................................ 87
8.2.19 Configuring program buttons ................................................................................................. 90
8.2.20 Software update ................................................................................................................... 94
8.2.21 About................................................................................................................................... 97
8.3 Advanced settings .................................................................................................................100
8.3.1 Accessing the "Advanced settings" screen............................................................................100
8.3.2 Configuring the physical address..........................................................................................101
8.3.3 Configuring the trusted devices ............................................................................................103
8.3.4 Configuring the "Manual snapshot" function..........................................................................110
8.3.5 Configuring the "Manual video recording" function.................................................................112
8.3.6 Configuring the "Auto unlock" function ..................................................................................114
8.3.7 Configuring the "Delete call history" function .........................................................................117
8.3.8 Configuring the address of default Guard Unit .......................................................................119
8.3.9 Restoring to factory default ..................................................................................................120
8.4 Configuring the IP Actuator ....................................................................................................121
8.4.1 Accessing the "Actuators" screen .........................................................................................121
8.4.2 Configuring the device type..................................................................................................122
8.4.3 Configuring the lock.............................................................................................................128
8.4.4 Configuring the "Report when unlock" function ......................................................................130
8.4.5 Linking the exit button with the lock ......................................................................................131
8.4.6 Configuring the "Door status detection" function ....................................................................132
8.4.7 Viewing the information........................................................................................................133
8.5 Configuring the Outdoor Station ............................................................................................. 134
8.5.1 Accessing the "Outoodr Stations" screen ..............................................................................134
8.5.2 Configuring the device type..................................................................................................135
8.5.3 Configuring the lock.............................................................................................................141
8.5.4 Configuring the "Door alarm" function ...................................................................................144
8.5.5 Configuring the "Anti-flicker" function....................................................................................145
8.5.6 Configuring the language .....................................................................................................146
8.5.7 Configuring the ringtone volume...........................................................................................147
8.5.8 Configuring the "Button tone" function...................................................................................148
8.5.9 Configuring the "Voice prompts" function ..............................................................................149
8.5.10 Configuring the push buttons................................................................................................150
8.5.11 Configuring the "Time sync" function ....................................................................................152
8.5.12 Viewing the information........................................................................................................153
9Operation.........................................................................................................................................154
9.1 Dashboard............................................................................................................................. 154
9.1.1 Dashboard overview ............................................................................................................154
9.1.2 Accessing the editing status.................................................................................................155
9.1.3 Creating a control for the camera .........................................................................................156
9.1.4 Creating a control for the intercom........................................................................................158
9.1.5 Creating a control for the light...............................................................................................160
9.1.6 Creating a control for the door lock.......................................................................................162
9.1.7 Creating a control for the elevator.........................................................................................164
9.1.8 Editing the control................................................................................................................166

Table of contents
Product manual
2TMD042300D0041
│
4
9.2 Incoming call ......................................................................................................................... 167
9.2.1 Call from Outdoor Stations...................................................................................................167
9.2.2 Call from Guard Units or Indoor Stations...............................................................................169
9.2.3 Call from doorbell ................................................................................................................171
9.3 Intercom................................................................................................................................172
9.4 Call Guard Unit ......................................................................................................................173
9.5 Surveillance........................................................................................................................... 174
9.5.1 Accessing video surveillance................................................................................................174
9.5.2 Surveillance from outdoor stations........................................................................................175
9.5.3 Surveillance from IP camera ................................................................................................176
9.6 Releasing the lock ................................................................................................................. 177
9.7 Turn on a light........................................................................................................................178
9.8 Call the elevator.....................................................................................................................179
9.9 Configuring the voice ............................................................................................................. 181
9.9.1 Adjusting the voice volume...................................................................................................181
9.9.2 Configuring the "Mute" function ............................................................................................182
9.10 Sending an alarm request ...................................................................................................... 183
9.11 History...................................................................................................................................184
9.12 Clean screen ......................................................................................................................... 186
10 Cyber security ..................................................................................................................................187
10.1 Disclaimer .............................................................................................................................187
10.2 Performance and service .......................................................................................................188
10.3 Deployment guideline.............................................................................................................189
10.4 Upgrading.............................................................................................................................. 189
10.5 Malware prevention solution...................................................................................................189
11 Notice ..............................................................................................................................................190

Notes on the instruction manual
Product manual
2TMD042300D0041
│
5
1Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place. If you pass the device on, also pass on this manual
along with it. Busch-Jaeger accepts no liability for any failure to observe the instructions in this
manual.
2Safety
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
3Intended use
This device is a part of the Busch-Welcome®IP system and operates exclusively with
components from this system. The device must only be installed in dry indoor rooms.

Environment
Product manual
2TMD042300D0041
│
6
4Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with household
waste.
– The device contains valuable raw materials that can be recycled. Therefore,
dispose of the device at the appropriate collecting facility.
4.1 Busch-Jaeger devices
All packaging materials and devices from Busch-Jaeger bear the markings and test seals for
proper disposal. Always dispose of the packing materials and electric devices and their
components via an authorized collection facility or disposal company.
Busch-Jaeger products meet the legal requirements, in particular the laws governing electronic
and electrical devices and the REACH ordinance.
(EU-Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU-REACH ordinance and law for the implementation of the ordinance (EG) No.1907/2006)

Product description
Product manual
2TMD042300D0041
│
7
5Product description
5.1 Device type
Article
number Order number Product name Colour Size (DxHxW)
Unit: mm
H8249-1W-
03 2TMA130050W0069 IP Touch Lite 7, DES+APP, LAN+WiFi White 192 x 128 x 17.2
H8249-1B-
03 2TMA130050B0069 IP Touch Lite 7, DES+APP, LAN+WiFi Black 192 x 128 x 17.2

Product description
Product manual
2TMD042300D0041
│
8
5.2 Control elements
No. Description
1 Touchscreen
1

Product description
Product manual
2TMD042300D0041
│
9
5.3 Terminal description
No. Description
1 LAN1 (PoE)
2 Doorbell connector
3 Power input connector
4Speaker
5Microphone
6 Micro USB connector emergency engineering access
16 2
3
45

Technical data
Product manual
2TMD042300D0041
│
10
6Technical data
Designation Value
Rating voltage 24 V
⎓
Operating voltage range 20-27 V
⎓
Rating current 24 V
⎓
, 375 mA
Display size 7"
Resolution 1024 x 600 px
Operating temperature 0 °C … +45 °C
Storage temperature -25 °C … +70 °C
PoE standard IEEE802.3 af
Wireless transmission band
802.11b/g/n:
2412...2462MHz (for United States)
2412...2472MHz (for European countries)
802.11a/n/ac:
5150…5250MHz
5250…5350MHz
5470…5725MHz
5725…5850MHz (for United States)
Wireless transmission power Max. 20 dBm
Wireless transmission standard IEEE 802.11 a/b/g/n/ac
Diameter of the cable thickness (3) 1.0 mm...1.4 mm

Mounting/Installation
Product manual
2TMD042300D0041
│
11
7Mounting/Installation
Warning
Electric voltage!
Dangerous currents flow through the body when coming into direct or indirect
contact with live components.
This can result in electric shock, burns or even death.
– Disconnect the mains power supply prior to installation and/or disassembly!
– Permit work on the 100-240 V supply system to be performed only by
specialist staff!
7.1 Requirement for the electrician
Warning
Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
– Incorrect installation endangers your life and that of the user of the electrical
system.
– Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
– Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
– Use suitable personal protective clothing.
– Use only suitable tools and measuring devices.
– Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective grounding, necessary additional measures, etc.).

Mounting/Installation
Product manual
2TMD042300D0041
│
12
7.2 Product dimensions
Unit: mm
7.3 Installation height
192
128
172.
Installation height
1.50 m (4.9 feet)

Mounting/Installation
Product manual
2TMD042300D0041
│
13
7.4 Surface-mounted installation
7.4.1 Surface mounting box size
(Unit: mm)
7.4.2 Surface mounted with the electrical accessory box
(Unit: mm)
187.6
123.3
2.2
2.4
192
128 SM box
VDE&BS N MA (Ame rica)ENEMA & Italy Swiss
60
60
120. 7
120.7
83.3
83.3
79.2
2
1
4
6
3Screw the mounting brackettoaccessory box.
5
It i s rec ommended to lock t he positions marked in
gray with screws to better secure the device.

Mounting/Installation
Product manual
2TMD042300D0041
│
14
7.5 Flush-mounted installation
(Unit: mm)
9
10
174
108
50
4
1
2
3
4
5
6
8
9
7
173.2
107.2
192
128
9.4
9.7
pre mounting box
Hole size of

Mounting/Installation
Product manual
2TMD042300D0041
│
15
7.6 Cavity wall installation
(Unit: mm)
7.6.1 Desktop installation
4
23
4
5
67
8
9
168
102
192
128
120.
123.
mounting box
Hole size of 1
Ø6x4
168
102
12
3
4

Mounting/Installation
Product manual
2TMD042300D0041
│
16
7.7 Dismantling
1
2

Commissioning
Product manual
2TMD042300D0041
│
17
8Commissioning
8.1 Wizard setup
There are 3 kinds of wizard setups for selection.
■Configuration without SmartAP
■Configuration via SmartAP only
■Configuration via SmartAP & APP
1. Configuration without SmartAP
■This configuration applies to a single-family house only.
■In this case, no SmartAP is needed.
■In this case, all devices are connected to the home network.
■In this case, only 1 outdoor station and 4 panels can be supported.
■In this case, only 1 IP Actuator can be supported, if IP Actuator is detected, it will be
automatically assigned as default lock.
■In this case, the Outdoor Station could be IP pushbutton Outdoor Station or Mini Outdoor
Station.
■In this case, all devices in the system obtain the signatures from the master panel.
■For more details, see chapter 8.1.1 “Configuration without SmartAP“ on page 20.
CAT.5/IP busline
Master Subsidiary Subsidiary
Router
IPActuator
Lock
Light
2 Outdoor Stationnd
Private camera

Commissioning
Product manual
2TMD042300D0041
│
18
2. Configuration via SmartAP only
■This configuration applies primarily to blocks.
■In this case, SmartAP is needed.
■In this case, all master panels and Outdoor Stations are connected to the community
network.
■In this case, the Outdoor Station could be IP touch 5 Outdoor Station, IP keypad Outdoor
Station or IP pushbutton Outdoor Station.
■In this case, SmartAP should complete its initial setup first. Please see the product manual
of SmartAP for more details regarding the initial setup.
■In this case, the designated panels obtain the physical address by entering it manually.
■In this case, all devices in the system obtain the signatures from SmartAP.
■For more details, see chapter 8.1.2 “Configuration via SmartAP“ on page 25.
SmartAP
Outdoor Station
CAT.5/IPbus line
PoE swit ch
PoE swit ch
PoE swit ch
PoE swit ch
PoE swit ch
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Public camera

Commissioning
Product manual
2TMD042300D0041
│
19
3. Configuration via SmartAP & APP
■This configuration applies to buildings mainly.
■In this case, SmartAP and mobile (APP) are needed.
■In this case, all master panels and Outdoor Stations are connected to the community
network.
■In this case, the Outdoor Station could be IP touch 5 Outdoor Station, IP keypad Outdoor
Station or IP pushbutton Outdoor Station.
■In this case, SmartAP should complete its initial setup first. Please see the product manual
of SmartAP for more details regarding the initial setup.
■In this case, the designated panels obtain the physical address via APP scanning setup.
■In this case, all devices in the system obtain the signatures from SmartAP.
■For more details, see chapter 8.1.3 “Configuration via SmartAP & APP“ on page 29.
SmartAP
Outdoor Station
CAT.5/IPbus line
PoE swit ch
PoE swit ch
PoE swit ch
PoE swit ch
PoE swit ch
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Public camera

Commissioning
Product manual
2TMD042300D0041
│
20
8.1.1 Configuration without SmartAP
Please follow the steps below:
[1] On the “Setup wizard” screen, select the language from the drop-down list.
[2] Tick the check box to accept the licences. Or tap “Click to read” to view the details of the
license.
[3] Select the region from the drop-down list.
[4] Tap “Accept & continue” to access the next screen.