Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 User manual

Product manual │06.09.2022
Busch-Installationsbus®KNX / Busch-free@home®
ST/U10.x.11-xxx
Busch-SmartTouch®
Branding -- Releas e 2018-01-01

Table of contents
Product manual 2CKA001473B5342
│
2
Table of contents
1 Notes on the instruction manual..................................................................................................................15
2 Safety...........................................................................................................................................................16
2.1 Information and symbols used.........................................................................................................16
2.2 Intended use ....................................................................................................................................17
2.3 Improper use ....................................................................................................................................17
2.4 Target group / Qualifications of personnel.......................................................................................18
2.4.1 Operation ................................................................................................................................... 18
2.4.2 Installation, commissioning and maintenance ............................................................................ 18
2.5 Cyber security ..................................................................................................................................19
2.5.1 Ports and services for supporting the main functionality............................................................. 21
2.6 Safety instructions............................................................................................................................23
3 Information on protection of the environment .............................................................................................24
3.1 Environment .....................................................................................................................................24
4 Product Overview ........................................................................................................................................25
4.1 Scope of supply................................................................................................................................27
4.2 Additional necessary components ...................................................................................................27
4.3 Overview of types.............................................................................................................................27
4.4 Overview of KNX functions ..............................................................................................................28
4.5 Device overview ...............................................................................................................................28
5 Technical data .............................................................................................................................................30
5.1 Dimensional drawings......................................................................................................................31
5.2 Circuit diagrams ...............................................................................................................................32
6 Connection, installation / mounting .............................................................................................................33
6.1 Planning instructions ........................................................................................................................33
6.2 Safety instructions............................................................................................................................33
6.3 Requirements for the electrician ......................................................................................................33
6.4 Preparatory steps.............................................................................................................................34
6.5 Mounting / dismantling .....................................................................................................................35
6.5.1 Installation sites.......................................................................................................................... 35
6.5.2 Mounting .................................................................................................................................... 36
6.5.3 Mounting in flush-mounted installation box in solid wall ............................................................. 37
6.5.4 Mounting in flush-mounted installation box in hollow wall........................................................... 38
6.5.5 Mounting with surface-mounted mounting frame........................................................................ 39
6.6 Electrical connection ........................................................................................................................40
6.6.1 Connection, installation and addressing ..................................................................................... 40
6.6.2 External power supply ................................................................................................................ 41
6.6.3 Installation .................................................................................................................................. 41
6.7 Dismantling.......................................................................................................................................42
7 Initial commissioning of device....................................................................................................................43
7.1 Initial commissioning with Busch-free@home
®
...............................................................................45

Table of contents
Product manual 2CKA001473B5342
│
3
8 Commissioning via Busch-free@home
®
.....................................................................................................48
8.1 Allocation of devices and definition of channels..............................................................................48
8.1.1 Add device ................................................................................................................................. 49
8.2 Setting options per channel .............................................................................................................51
8.2.1 Parameter settings of panel........................................................................................................ 52
8.2.1.1 Parameter settings Channel........................................................................ 55
8.2.1.2 Other settings.............................................................................................. 58
8.3 Specifying or editing functions (buttons)..........................................................................................63
8.3.1 Creating functions ...................................................................................................................... 63
8.3.2 Changing functions..................................................................................................................... 66
8.3.3 Removing functions.................................................................................................................... 67
9 Commissioning of the KNX function via BJE DCA SmartTouch 10 (from ETS5).......................................68
9.1 Integration into the KNX system (ETS)............................................................................................68
9.1.1 Prerequisites .............................................................................................................................. 68
9.1.2 Installation of the BJE DCA SmartTouch 10............................................................................... 69
9.1.3 Installation sequence.................................................................................................................. 70
9.1.4 Integrating the Busch-SmartTouch
®
into the ETS....................................................................... 71
9.2 Overview of the DCA commissioning tool .......................................................................................72
9.2.1 Starting the DCA ........................................................................................................................ 72
9.3 Screen areas of the DCA .................................................................................................................73
9.4 Explanation of the basic structure (Terms)......................................................................................75
9.5 Commissioning sequence................................................................................................................77
9.6 Configuring basic settings for the panel ..........................................................................................77
9.6.1 Basic settings (system settings) of the panel.............................................................................. 78
9.7 Creating the navigation structure.....................................................................................................93
9.7.1 Creating operating pages (start pages) ...................................................................................... 93
9.7.2 Creating room and floor pages ................................................................................................... 94
9.7.3 Editing operating pages.............................................................................................................. 94
9.8 Configuration of the operating pages...............................................................................................96
9.8.1 "Switch" control element............................................................................................................. 97
9.8.2 Control element "Rocker switch" ................................................................................................ 97
9.8.3 "Dimmer" control element........................................................................................................... 97
9.8.4 Control element: "Dimmer slider" ............................................................................................... 97
9.8.5 Operation of "RGBW" control element“ ...................................................................................... 97
9.8.6 "Blind" control element ............................................................................................................... 98
9.8.7 Control element "RTC control element"...................................................................................... 98
9.8.8 Control element "Fan switch" ..................................................................................................... 98
9.8.9 Control element "Split Unit Control"............................................................................................ 98
9.8.10 Control element "VRV control" ................................................................................................... 98
9.8.11 "Scene" control element ............................................................................................................. 99
9.8.12 Control element: "Value slider"................................................................................................... 99
9.8.13 "Display" control element ........................................................................................................... 99
9.8.14 Control element "Audio control".................................................................................................. 99
9.8.15 "Page link" control element......................................................................................................... 99
9.8.16 Control element "Welcome control"............................................................................................ 99
9.9 Editing control elements.................................................................................................................100
9.9.1 Delete control element ..............................................................................................................100
9.9.2 Copy control element ................................................................................................................101

Table of contents
Product manual 2CKA001473B5342
│
4
9.9.3 Add control element to favourites list.........................................................................................101
9.10 Configuration of applications and application pages .....................................................................102
9.10.1 Application "Door communication" ............................................................................................102
9.10.2 Application "Fault and alarm messages" ...................................................................................103
9.10.3 Application "Scene actuator" .....................................................................................................104
9.10.4 Application "Presence simulation" .............................................................................................104
9.10.5 Application "Time programs" .....................................................................................................105
9.10.6 Application "Logical functions"...................................................................................................105
9.10.7 Application "Internal RTC".........................................................................................................106
9.10.8 "Favourite control elements"......................................................................................................107
9.11 Editing communication objects ......................................................................................................108
9.12 Editing group addresses ................................................................................................................109
9.13 Additional tools (functions).............................................................................................................111
9.13.1 Import........................................................................................................................................111
9.13.2 Export........................................................................................................................................112
9.13.3 Preview .....................................................................................................................................112
9.13.4 Reset layout ..............................................................................................................................112
9.13.5 Reset all ....................................................................................................................................112
10 KNX control elements and application parameters...................................................................................113
10.1 "Switch" control element ................................................................................................................113
10.1.1 Name of the control element .....................................................................................................113
10.1.2 Name of room (otional)..............................................................................................................113
10.1.3 Size of the button ......................................................................................................................113
10.1.4 Function icon.............................................................................................................................113
10.1.5 Type of switch ...........................................................................................................................113
10.1.6 Object type 1 / value 2...............................................................................................................114
10.1.7 Status control element (icon/text) is operated via a separate object..........................................117
10.1.8 Icon type....................................................................................................................................118
10.1.9 Enable 1-bit communication object "Disable" ............................................................................119
10.2 Control element "Rocker switch" ...................................................................................................120
10.2.1 Name of the control element .....................................................................................................120
10.2.2 Name of room (otional)..............................................................................................................120
10.2.3 Size of the button ......................................................................................................................120
10.2.4 Function icon.............................................................................................................................120
10.2.5 Icon type....................................................................................................................................120
10.2.6 Status control element (icon/text) is operated via a separate object..........................................121
10.2.7 Additional status text for value...................................................................................................121
10.2.8 Object type ................................................................................................................................121
10.2.9 Enable 1-bit communication object "Disable" ............................................................................125
10.3 "Dimmer" control element ..............................................................................................................126
10.3.1 Name of the control element .....................................................................................................126
10.3.2 Name of room (otional)..............................................................................................................126
10.3.3 Size of the button ......................................................................................................................126
10.3.4 Function icon.............................................................................................................................126
10.3.5 Icon type....................................................................................................................................126
10.3.6 Icon for On / icon for Off ............................................................................................................126
10.3.7 Status control element (icon) is controlled by a separate object................................................127
10.3.8 Manner of dimming....................................................................................................................127
10.3.9 Enable 1-bit communication object "Disable" ............................................................................127

Table of contents
Product manual 2CKA001473B5342
│
5
10.4 Control element: "Dimmer slider"...................................................................................................128
10.4.1 Name of the control element .....................................................................................................128
10.4.2 Name of room (otional)..............................................................................................................128
10.4.3 Size of the button ......................................................................................................................128
10.4.4 Function icon.............................................................................................................................128
10.4.5 Icon type....................................................................................................................................128
10.4.6 Icon for On / icon for Off ............................................................................................................128
10.4.7 Status control element (icon) is operated via a separate object ................................................129
10.4.8 Display value in control element................................................................................................129
10.4.9 Slider sends ..............................................................................................................................130
10.4.10 Brightness change [%] ..............................................................................................................130
10.4.11 Enable 1-bit communication object "Disable" ............................................................................130
10.5 Operation of "RGBW" control element“ .........................................................................................131
10.5.1 Name of the control element .....................................................................................................131
10.5.2 Name of room (otional)..............................................................................................................131
10.5.3 Size of the button ......................................................................................................................131
10.5.4 Function icon.............................................................................................................................131
10.5.5 Display value in control element................................................................................................131
10.5.6 Type of colour/white lamp .........................................................................................................132
10.5.7 Brightness change [%] ..............................................................................................................135
10.5.8 Telegram is repeated every [sec.]: ............................................................................................135
10.5.9 Status control element (icon) is operated via a separate object ................................................135
10.5.10 Enable 1-bit communication object "Disable" ............................................................................136
10.6 "Blind" control element ...................................................................................................................137
10.6.1 Name of the control element .....................................................................................................137
10.6.2 Name of room (otional)..............................................................................................................137
10.6.3 Function icon.............................................................................................................................137
10.6.4 Size of the button ......................................................................................................................137
10.6.5 Using 1-byte positioning ............................................................................................................137
10.6.1 Icon type....................................................................................................................................138
10.6.2 Type of control ..........................................................................................................................138
10.6.3 Status control element (icon) is operated via a separate object ................................................139
10.6.4 Enable 1-bit communication object "Disable" ............................................................................140
10.7 Control element "RTC control element".........................................................................................141
10.7.1 Name of the control element .....................................................................................................141
10.7.2 Name of room (otional)..............................................................................................................141
10.7.3 Size of the button ......................................................................................................................141
10.7.4 Function icon.............................................................................................................................141
10.7.5 Additional functions/objects.......................................................................................................141
10.7.6 Delay time during reading of telegrams after reset [sec.]...........................................................141
10.7.7 Display actual temperature........................................................................................................142
10.7.8 Display ......................................................................................................................................142
10.7.9 Hide temperature unit................................................................................................................142
10.7.10 Unit of temperature....................................................................................................................142
10.7.11 Adjusting the temperature unit via object...................................................................................142
10.7.12 Heating/cooling switchover........................................................................................................142
10.7.13 Fan coil control during heating mode ........................................................................................142
10.7.14 Fan coil control during cooling mode.........................................................................................143
10.7.15 Step size of setpoint adjustment................................................................................................143
10.7.16 Setpoint adjustment master/slave via communication object.....................................................143
10.7.17 Enable 1-bit communication object "Disable" ............................................................................143

Table of contents
Product manual 2CKA001473B5342
│
6
10.7.18 Number of fans..........................................................................................................................144
10.7.19 Fan speed level data format of master/slave.............................................................................144
10.7.20 Number of fan speed levels.......................................................................................................144
10.7.21 Lowest manually adjustable fan speed level .............................................................................144
10.7.22 Fan coil settings heating............................................................................................................144
10.7.23 Fan coil settings for cooling.......................................................................................................144
10.8 Control element "Fan switch".........................................................................................................144
10.8.1 Name of the control element .....................................................................................................144
10.8.2 Name of room (otional)..............................................................................................................145
10.8.3 Size of the button ......................................................................................................................145
10.8.4 Function icon.............................................................................................................................145
10.8.5 Deactivation of switch-off option................................................................................................145
10.8.6 Icon type....................................................................................................................................145
10.8.7 Number of levels .......................................................................................................................146
10.8.8 Object type ................................................................................................................................146
10.8.9 Display status............................................................................................................................148
10.8.10 Status control element (icon) is controlled by a separate object................................................148
10.8.11 Enable 1-bit communication object "Disable" ............................................................................149
10.9 Control "Split Unit Control" .............................................................................................................150
10.9.1 Name of the control element .....................................................................................................150
10.9.2 Name of room (otional)..............................................................................................................150
10.9.3 Size of the button ......................................................................................................................150
10.9.4 Function icon.............................................................................................................................150
10.9.5 Display actual temperature........................................................................................................150
10.9.6 Minimum setpoint ......................................................................................................................150
10.9.7 Maximum setpoint .....................................................................................................................150
10.9.8 Step size of setpoint adjustment................................................................................................151
10.9.9 Number of fan speed levels (without AUTO) .............................................................................152
10.9.10 Use automatic mode for fans.....................................................................................................152
10.9.11 Use mode: Automatic ................................................................................................................152
10.9.12 Use mode: Heating....................................................................................................................152
10.9.13 Use mode: Cooling....................................................................................................................153
10.9.14 Use mode: Drying......................................................................................................................153
10.9.15 Use mode: Fan..........................................................................................................................153
10.9.16 Use horizontal oscillation...........................................................................................................153
10.9.17 Use vertical oscillation...............................................................................................................153
10.9.18 Use extra mode: Silence Mode .................................................................................................154
10.9.19 Use additional mode: Boost ......................................................................................................154
10.9.20 Use additional mode: Forced operation.....................................................................................154
10.9.21 Use additional mode: Scene......................................................................................................154
10.9.22 Additional mode Use window contact........................................................................................155
10.9.23 Use additional Presence mode..................................................................................................155
10.9.24 Enable 1-bit communication object "Disable" ............................................................................155
10.10 Control "Split Unit Control" .............................................................................................................156
10.10.1 Name of the control element .....................................................................................................156
10.10.2 Name of room (otional)..............................................................................................................156
10.10.3 Size of the button ......................................................................................................................156
10.10.4 Function icon.............................................................................................................................156
10.10.5 Value [1 byte 0-255] for heating mode.......................................................................................157
10.10.6 Value [1 byte 0-255] for cooling mode.......................................................................................157
10.10.7 Using only fan operation............................................................................................................157

Table of contents
Product manual 2CKA001473B5342
│
7
10.10.8 Value [1 byte 0-255] for "Only fan operation" ............................................................................157
10.10.9 Using dehumidification operation ..............................................................................................157
10.10.10 Value [1 byte 0-255] for dehumidification operation...................................................................157
10.10.11 Using automatic operation.........................................................................................................157
10.10.12 Value [1 byte 0-255] for automatic operation.............................................................................158
10.10.13 Fan speed levels .......................................................................................................................159
10.10.14 Value for the speed x ................................................................................................................159
10.10.15 Using automatic fan speed control ............................................................................................159
10.10.16 Value for automatic fan speed x ................................................................................................159
10.10.17 Step size ...................................................................................................................................160
10.10.18 Maximum setpoint [°C] ..............................................................................................................160
10.10.19 Minimum setpoint [°C] ...............................................................................................................160
10.10.20 Using VRV temperature sensor error display ............................................................................161
10.10.21 Using VRV error display ............................................................................................................161
10.10.22 Value for cancelling the VRV error display ................................................................................161
10.10.23 Enable 1-bit communication object "Disable" ............................................................................161
10.11 "Scene" control element.................................................................................................................162
10.11.1 Name of the control element .....................................................................................................162
10.11.2 Name of room (otional)..............................................................................................................162
10.11.3 Size of the button ......................................................................................................................162
10.11.4 Function icon.............................................................................................................................162
10.11.5 Scene background ....................................................................................................................162
10.11.6 Start scene at selection .............................................................................................................162
10.11.7 Long operation after... ...............................................................................................................162
10.11.8 Status control element (icon) is controlled by a separate object................................................163
10.11.9 Number of scenes [1 - 10] .........................................................................................................163
10.11.10 Scene number x [1 - 64] ............................................................................................................163
10.11.11 Name of scene x .......................................................................................................................163
10.11.12 Background for scene x.............................................................................................................163
10.11.13 Saving scene x with a long press ..............................................................................................164
10.11.14 Enable 1-bit communication object "Disable" ............................................................................165
10.12 Control element: "Value slider" ......................................................................................................166
10.12.1 Name of the control element .....................................................................................................166
10.12.2 Name of room (otional)..............................................................................................................166
10.12.3 Size of the button ......................................................................................................................166
10.12.4 Function icon.............................................................................................................................166
10.12.5 Display value in control element................................................................................................166
10.12.6 Slider sends ..............................................................................................................................167
10.12.7 Object type ................................................................................................................................167
10.12.8 Enable 1-bit communication object "Disable" ............................................................................169
10.13 "Display" control element ...............................................................................................................170
10.13.1 Name of the control element .....................................................................................................170
10.13.2 Name of room (otional)..............................................................................................................170
10.13.3 Size of the button ......................................................................................................................170
10.13.4 Function icon.............................................................................................................................170
10.13.5 Type of display element ............................................................................................................171
10.13.6 Type of display element — Status display — Object type .........................................................172
10.13.7 Type of display element — Value display — Measurement display with colour display.............173
10.13.8 Type of display element — Value display — Object type ..........................................................174
10.13.9 Type of display element — Linear measurement display — Measurement display with
colour display ............................................................................................................................176

Table of contents
Product manual 2CKA001473B5342
│
8
10.13.10 Type of display element — Linear measurement display — Display value in control
element .....................................................................................................................................176
10.13.11 Type of display element — Linear measurement display — Object type...................................177
10.13.12 Type of display element — Round measurement display..........................................................178
10.13.13 Type of display element — Wind rose.......................................................................................179
10.13.14 Type of display element — Wind rose — Display value in control element ...............................179
10.13.15 Type of display element — Wind rose — Display value wind force ...........................................180
10.13.16 Type of display element — Wind rose - Object type..................................................................180
10.13.17 Type of display element — Wind force — Unit ..........................................................................182
10.13.18 Type of display element — Temperature — Unit.......................................................................182
10.13.19 Type of display element — Rain — Text for rain .......................................................................182
10.13.20 Type of display element — Rain — Text for no rain ..................................................................182
10.13.21 Type of display element — Twilight — Unit ...............................................................................183
10.13.22 Type of display element — Brightness ......................................................................................183
10.13.23 Type of display element — CO
2
— Unit ....................................................................................183
10.13.24 Type of display element — Moisture — Unit .............................................................................184
10.13.25 Type of display element — Air pressure — Unit........................................................................184
10.13.26 Type of display element — Measurement of power consumption— Data point type .................184
10.13.27 Type of display element — Measurement of power consumption— Unit...................................184
10.13.28 Type of display element — Voltage— Data point type ..............................................................184
10.13.29 Type of display element — Voltage — Unit ...............................................................................184
10.13.30 Type of display element — Current — Data point type..............................................................184
10.13.31 Type of display element — Current — Unit ...............................................................................185
10.13.32 Type of display element — Frequency — Unit ..........................................................................185
10.13.33 Type of display element — Power— Data point type ................................................................185
10.13.34 Type of display element — Power — Unit .................................................................................185
10.13.35 Type of display element — Energy — Data point type ..............................................................186
10.13.36 Type of display element — Energy — Unit................................................................................186
10.13.37 Type of display element — Power factor — Unit .......................................................................186
10.13.38 Type of display element — Phase angle — Unit .......................................................................186
10.13.39 Type of display element — Gas (volume) — Data point type ....................................................187
10.13.40 Type of display element — Gas (volume) — Unit......................................................................187
10.13.41 Type of display element — Water (volume) — Data point type .................................................187
10.13.42 Type of display element — Water (volume) — Unit...................................................................187
10.13.43 Type of display element — Flow-through volume — Data point type ........................................187
10.13.44 Type of display element — Flow-through volume — Unit..........................................................188
10.13.45 Enable 1-bit communication object "Disable" ............................................................................188
10.14 Control element "Audio control" .....................................................................................................189
10.14.1 Name of the control element .....................................................................................................189
10.14.2 Name of room (otional)..............................................................................................................189
10.14.3 Size of the button ......................................................................................................................189
10.14.4 Function icon.............................................................................................................................189
10.14.5 Number of sources ....................................................................................................................189
10.14.6 Object type Playback / Pause control........................................................................................190
10.14.7 Use forward/reverse control ......................................................................................................190
10.14.8 Object type Forward/reverse control..........................................................................................191
10.14.9 Use of button for mute...............................................................................................................191
10.14.1 Use shuffle control.....................................................................................................................192
10.14.2 Use repeat control.....................................................................................................................193
10.14.3 Use of volume button ................................................................................................................194
10.14.4 Use of ON/OFF button ..............................................................................................................195
10.14.5 Enable 1-bit communication object "Disable" ............................................................................196

Table of contents
Product manual 2CKA001473B5342
│
9
10.15 "Page link" control element ............................................................................................................197
10.15.1 Name of the control element .....................................................................................................197
10.15.2 Name of room (otional)..............................................................................................................197
10.15.3 Size of the button ......................................................................................................................197
10.15.4 Function icon.............................................................................................................................197
10.15.5 Linked with page .......................................................................................................................197
10.15.6 Enable 1-bit communication object "Disable" ............................................................................198
10.16 Control element "Welcome control" ...............................................................................................199
10.16.1 Name of the control element .....................................................................................................199
10.16.2 Name of room (otional)..............................................................................................................199
10.16.3 Size of the button ......................................................................................................................199
10.16.4 Function icon.............................................................................................................................199
10.16.5 Type of the control element.......................................................................................................199
10.16.6 Using trigger object ...................................................................................................................199
10.16.7 Trigger with ...............................................................................................................................200
10.16.8 Enable 1-bit communication object "Disable" ............................................................................201
10.17 Application "Door communication".................................................................................................202
10.17.1 Use of door communication.......................................................................................................202
10.17.2 Page PIN-protected...................................................................................................................202
10.17.3 Use of control elements [%] ......................................................................................................202
10.18 Application "Fault and alarm messages" - Global settings............................................................205
10.18.1 Use of fault and alarm messages ..............................................................................................205
10.18.2 Page PIN-protected...................................................................................................................205
10.18.3 Enable export ............................................................................................................................205
10.18.4 Automatic archiving at an acknowledgement ............................................................................206
10.18.5 Sound for alarm.........................................................................................................................206
10.18.6 Sound for Notice .......................................................................................................................206
10.18.7 Signal tone for error...................................................................................................................206
10.18.8 Default setting for signal tone volume [%] .................................................................................206
10.19 Application "Fault and alarm messages" - Settings of the individual messages...........................206
10.19.1 Name of message .....................................................................................................................206
10.19.2 Type of message.......................................................................................................................207
10.19.3 Type of alarm ............................................................................................................................207
10.20 Application "Scene actuator"..........................................................................................................209
10.20.1 Name of scene actuator ............................................................................................................209
10.20.2 Number of participants ..............................................................................................................209
10.20.3 Number of scenes .....................................................................................................................209
10.20.4 Overwriting scenes during download.........................................................................................209
10.20.5 Telegram delay .........................................................................................................................209
10.20.6 Object type x .............................................................................................................................210
10.20.7 Name of scene ..........................................................................................................................213
10.20.8 Scene number...........................................................................................................................213
10.20.9 Light scenes can be started with a ............................................................................................213
10.20.10 Light scene can be stored .........................................................................................................213
10.20.11 Object x is to be changed..........................................................................................................213
10.21 Application "Presence simulation" .................................................................................................214
10.21.1 Use of presence simulation .......................................................................................................214
10.21.2 Page PIN-protected...................................................................................................................214
10.21.3 Enable export ............................................................................................................................214
10.21.4 Delay time up to activation [min.]...............................................................................................215

Table of contents
Product manual 2CKA001473B5342
│
10
10.21.5 Object type 1-20........................................................................................................................215
10.22 Application "Time programs"..........................................................................................................216
10.22.1 Page PIN-protected...................................................................................................................216
10.22.2 Overwriting time programs during download .............................................................................216
10.23 Application "Logical functions" .......................................................................................................217
10.23.1 Channel x — Application ...........................................................................................................217
10.24 Application "Internal RTC" .............................................................................................................229
10.24.1 General - Control function .........................................................................................................229
10.24.2 General - Operating mode after reset........................................................................................229
10.24.3 General - Additional functions/objects .......................................................................................230
10.24.4 General — Delay time for read telegrams after reset [s]............................................................230
10.24.1 General - "Current HVAC operating mode" object active...........................................................230
10.24.2 Heating control ..........................................................................................................................231
10.24.3 Heating control - Control value type ..........................................................................................231
10.24.4 Heating control — Heating type.................................................................................................231
10.24.5 Heating control — P-component ...............................................................................................232
10.24.6 Heating control — I-component.................................................................................................232
10.24.7 Heating control — Extended settings ........................................................................................232
10.24.8 Basic stage heating ...................................................................................................................233
10.24.9 Basic stage heating — Status object heating ............................................................................233
10.24.10 Basic stage heating — Mode of the control value......................................................................233
10.24.11 Basic stage heating — Hysteresis.............................................................................................233
10.24.12 Basic stage heating — Control value difference for sending of heating control value................233
10.24.13 Basic stage heating — Cyclic sending of the control value........................................................234
10.24.14 Additional stage heating - PWM cycle heating ..........................................................................234
10.24.15 Basic stage heating — Maximum control value (0 - 255)...........................................................234
10.24.16 Basic stage heating — Minimum control value for basic load (0 to 255)....................................234
10.24.17 Control of additional heating stage ............................................................................................236
10.24.18 Control of additional heating stage — Control value type..........................................................236
10.24.19 Control of additional heating stage — Additional heating type...................................................236
10.24.20 Control of additional heating stage - P-component....................................................................237
10.24.21 Control of additional heating stage - I-component .....................................................................237
10.24.22 Control of additional heating stage - Temperature difference to basic stage .............................237
10.24.23 Control of additional heating stage - Extended settings.............................................................237
10.24.24 Additional heating stage ............................................................................................................239
10.24.25 Additional heating stage — Mode of the control value...............................................................239
10.24.26 Additional stage heating - PWM cycle heating ..........................................................................239
10.24.27 Additional heating stage — Control value difference for sending of heating control value.........239
10.24.28 Additional heating stage - Cyclic sending of the control value ...................................................240
10.24.29 Additional heating stage — Maximum control value (0 - 255)....................................................240
10.24.30 Additional heating stage — Minimum control value for basic load (0 - 255) ..............................240
10.24.31 Additional heating stage - Hysteresis ........................................................................................240
10.24.32 Cooling control ..........................................................................................................................242
10.24.33 Cooling control — Control value type ........................................................................................242
10.24.34 Cooling control — Cooling type .................................................................................................242
10.24.35 Cooling control - P-component ..................................................................................................243
10.24.36 Cooling control - I-component ...................................................................................................243
10.24.37 Cooling control - Extended settings...........................................................................................243
10.24.38 Basic stage cooling ...................................................................................................................244
10.24.39 Basic stage cooling — Status object cooling .............................................................................244
10.24.40 Basic stage cooling — Mode of the control value ......................................................................244