iviewkorea T-F190IU User manual

DOC. NO.
RD_T-F190IU _H_001
REV.
PAGE DATE
T-F190IU
01 1 OF 10 2009,4,30
A4 (210mm×297mm)
Design checked Approved Our Signature
For
Customer Approva
P ease return one of these to us immediate y with your Signature for Approva
T-F190IU
19 inch
Infrared T pe Touch Screen
With USB interface
IVIEWKOREA
http://www.iviewkorea.com
Email: [e-mail]
02. 2038. 8570

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 2 OF 10 2009,4,30
A4 (210mm×297mm)
Important
ImportantImportant
Important Information
InformationInformation
Information
Cop right
Copyright 2009 Hwayoung Systems Co., Ltd. ALL RIGHTS RESERVED
No part of this document may be copied or reproduced in any form by any means without prior written
consent of Hwayoung Systems Co., Ltd.
Hwayoung Systems Co., Ltd. makes no commitment to update or keep current the information contained
in this document. The information in this document is subject to change without notice.
A re evant issues have been considered in the preparation of this document. Shou d you notice an
omission or any questionab e item in this document, p ease fee free to notify Hwayoung Systems Co.,
Ltd.
Regard ess of the foregoing statement, Hwayoung Systems Co., Ltd. assumes no responsibi ity for any
errors that may appear in this document or for resu ts obtained by the user as a resu t of using this
product.
Safet precautions
The safety recommendations out ined in this section are to be read, understood and fo owed before
operating the product.
Keep this information in a safe p ace for future reference.
Fai ure to comp y with any of the fo owing safety procedures cou d resu t in serious hazard.
 Do not operate product for any purposes other than its intended use.
 This product is intended for indoor use on y.
 Do not operate product if power supp y is damaged in anyway.
 Do not insert objects into openings.
 Do not immerse product in water or permit iquids to spi inside.
 Turn off power when unattended or not in use.
 Unp ug product before moving or when not in use for an extended period of time.
 Insta the product in a c ose and easi y accessib e socket-out et.
 Do not a ter or extend e ectric p ug.
 P ug is configured for appropriate e ectrica supp y.
 Do not over oad e ectrica out ets as this can resu t in a fire.

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 3 OF 10 2009,4,30
A4 (210mm×297mm)
Revision Histor
Rev Date Description Remark
01 2009,4,30 Start Ver 01

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 4 OF 10 2009,4,30
A4 (210mm×297mm)
Contents
1. Generals ---------------------------------------------------
2. S stem Block Diagram -------------------------------------
3. Specifications --------------------------------------------
4. Electrical & Environmental -------------------------------
5. Interface ( Connector )-------------------------------------
6. Dimension & View ------------------------------------------
7. Serial No Identification ----------------------------------
8. Cautions -----------------------------------------------------
9. Warrant ----------------------------------------------------
5
5
6
7
7
8
10
10
10

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 5 OF 10 2009,4,30
A4 (210mm×297mm)
1. Generals
1 .1 Overview
This manua is written to describe the mode T-F190IU- 19 inch Infrared touch screen.
It refers to the genera specification, connector functions and dimension.
P ease contact us for more information on this product.
1.2 Features
 Infrared interruption detecting system with infrared sensors
 Input Mode: Finger, g oved hand or other sty us activation
2. S stem Block Diagram
USB
TOUCH
Infrared Touch Pane
(19 inch)

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 6 OF 10 2009,4,30
A4 (210mm×297mm)
3. Specifications
3.1 Touch Matrix Panel ( TP190I6XXB + Mechanic ) - Tempered glass (3T)
Standard ) USB
Item Description
Interface USB2.0
Signa D+ , D- , VBUS, GND
Speed 12MBps (Fu Speed)
Transfer Mode Interrupt Mode
3.2 Touch Interface Cable
Item
Description
Detection Infrared interruption detecting system with infrared sensors
Outline 428.8 ( H ) x 354.8 ( V ) x 10.2 (D)
Detection Area 378.0 (H) X 303.0 (V)
㎜ ( Diagona 19’’)
An optical element Space 6.0 (H) X 6.0 (V)
㎜
The number of optical elements 63 (H) X 50 (V) pcs
Touch plate
Tempered g ass (3T)
Option 1 ) Hard Coating Acry (3T)
Option 2 ) Anti G are Acry (3T)
Option 3 ) Customer's Specia Spec
Scanning Rate Norma Mode : 20msec ( Typ )
S eep Mode : 50msec ( Typ )

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 7 OF 10 2009,4,30
A4 (210mm×297mm)
4. Electrical & Environmental
Item Description
Supp y vo tage 5 Vdc ± 10%
Power consumption 2 [Watt]
Dimension 428.8 ( H ) x 354.8 ( V ) x 10.2 (D)
Accessory
USB Cab e
CD ( Insta CD )
USER MANUAL
Temperature Operation : 0
～ 40 ℃
Storage : -10 ～ 50 ℃
Humidity
Operation : 0 ～ 90%
Storage : 0 ～ 95%
Resistance of ambient ight Side ight 5,000 Lx (incident ang e 20°)
Front ight 60,000 Lx (incident ang e 90°)
5. Interface ( Connector )
5.1 USB interface - CN1 ( Molex-53261-10)
Pin No.
Description Pin No.
Description
1 VCC 6 USB DP
2 Tx 7 Samba_Boot
3 Rx 8 OSD TD
4 GND 9 OSD RD
5 USB DM 10 GND

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 8 OF 10 2009,4,30
A4 (210mm×297mm)
6. Dimension & View
6.1 Front View

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 9 OF 10 2009,4,30
A4 (210mm×297mm)
6.2 Rear View

DOC. NO.
RD_T-F190IU_H_001
REV.
PAGE DATE
T-F190IU
01 10 OF 10
2009,4,30
A4 (210mm×297mm)
7. Serial Number Identification
The seria number sha be indicated on the back of the unit.
8. Caution
In order to maintain superior performance for the ife of this product, customers are advised to maintain
the fo owing guide ines:
8.1 Storage
 Do not store the product in humidity or temperature ranges exceeding those isted above.
 Do not store products out of origina packaging.
 Do not expose product to direct sun ight.
8.2 Unpacking
 Do not attempt to dismant e or repair.
8.3 Handling
 Do not use product for any purpose outside its intended use.*
 Do not operate product if power supp y is damaged in anyway.
 Do not insert objects into openings.
 Do not immerse product in water or spi iquids inside.
 Turn off power when unattended or not in use.
 Do not by the sharp edge on the screen.
 Do not stock product outside of packaging.
 C ean the screen with a coho and a soft int-free c oth**.
* This product is not intended for outdoor use.
** Do not a ow a coho to spi inside the product.
8.4 Assembling
 Avoid extreme pressure on the product.
 Avoid unnecessary strain to cab es & connectors
9. Warrant
This product manufactured to this specification shou d be capab e of meeting a characteristics for 18
Months from the de ivery date of Hwayoung Systems Co., Ltd. when stored and used as specified in
this document.
Use of this product outside the specified criteria herein wi negate the 18 Months warranty
The damages (defau ts) described be ow are NOT covered under the warranty.
 User fau t through ack of care.
 User fau t through intentiona dismant e or attempted repair.
 User fau t by exceeding e ectrica connection requirements.
 Damage caused by natura disaster. (Fire, F ood, Earthquake, Lightening, etc.)
 Rep acement of any parts.
yymm- ppp- vv- nnnn
yy : year
mm : month
ppp : part number ( 113 )
vv : version
nnnn : number of products produced