Bush DW12SAEINT User manual

Instruction manual
Dishwasher
DW12SAEINT - DW12LSINTE1

You'll soon be enjoying your new
Dishwasher.
It all begins here, with your instructions. Don't worry,
there's nothing too technical coming up. Just
simple, step-by-step guidance to get you up and
running quickly. Sound good? Then let's get started.
Help and Guidance
We're here to help you get the most from your DW12LSINT. Should you require any
guidance, a simple solution can often be found online at:
www.bush-support.com
If you still require further assistance, call one of our experts on 0345 257 7271.
2
DW12SAEINT -DW12LSINTE1
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

3
Contents
33
36
37
37
Product support
Troubleshooting
Help and assistance
Declaration of conformance to
product standards
Disposal
Guarantee 38
7
6
10
13
16
16
17
20
24
25
31
31
Safety information
Safety information
Getting to know your
Dishwasher
Ready? Let's begin
Accessories
Installing your Dishwasher
Installation requirements
Unpacking
Connections (electrical, water, gas)
Functions
Functions
Using your Dishwasher
First use of DW12SAEINT -DW12LSINTE1
advanced functions/use
Care and Maintenance
Cleaning
Maintenance actions
1
2
3
4
5
6
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on XXXX XXX XXXX.
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
standard and

1
Safety information
Icon Type Meaning
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Fire risk
CAUTION Injury or property damage risk
IMPORTANT / NOTE Operating the system correctly

Safety information
Important - please read these instructions fully before
installing or operating. Keep this manual
for future reference.
6
1.1 General Safety Warnings
Please check the packaging of your
machine before installation and the outer surface of
the machine once the packaging has been
removed. Do not operate the machine if it appears
damaged or if the packaging has been opened.
•Packaging materials protect your machine
from any damage that might occur during
transportation. The packaging materials are
environmentally friendly as they are
recyclable. Use of recycled material reduces
raw material consumption and decreases
waste production.
•Choose a suitable and safe place to install
your machine.
•Only original spare parts should be used with
the machine.
Unplug the machine before installation.
Your machine must only be installed by an
authorised service agent. Installation by anyone
other than an authorised agent may cause your
warranty to be void.
Check that the indoor electrical fuse system is
connected in line with safety regulations.
All electrical connections must match the
values on the plate.
Ensure the machine does not stand on the
electrical supply cable.
Never use an extension cord or a multiple
socket connection.
The plug should be accessible after the
machine is installed.
After installation, run your machine unloaded for the
first time.
The machine must not be plugged in during
positioning.
Always use the coated plug supplied with your
machine.
I If the electrical cable is damaged, it should only
be replaced by a qualified electrician.
1.3 During Use
This machine is for domestic use only, do not use it for
other purposes. Commercial use will void the
guarantee.
Do not stand, sit or place loads on the open
door of the dishwasher.
Only use detergents and rinse aids produced
specifically for dishwashers. Our company is not
responsible for any damage that may occur due to
misuse.
Do not drink water from the machine.
Due to the danger of explosion, do not place
any chemical dissolving agents into the machine's
washing section.
Check the heat-resistance of plastic items before
washing them in the machine.
Only put items in the machine which are
suitable for dishwashing and take care not to overfill the
baskets.
This appliance can be used by children
aged from 8 years and above and by persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been
given supervision or instruction concerning the use
of the appliance in a safe way and understand
hazards involved. Children should not be allowed to
play with the appliance.
Remove packaging and keep it out of reach
of children.
Keep children away from detergents and
rinse aids.
There may be some residue left in the
machine after washing. Keep children away from
the machine when it is open.
1.2 Installation Warnings
Safety information
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

Safety information
Important - Please read these instructions fully before
installing or operating. Keep this manual
for future reference.
7
Do not open the door while the machine is in
operation, hot water may spill out. Safety devices
ensure the machine stops if the door is opened.
The machine door should not be left open. It
may cause accidents.
Place knives and other sharp objects in the
cutlery basket in a blade-down position.
For models with the automatic door-opening
system, when the EnergySave option is active, the
door will open at the end of a program. To prevent
damage to your dishwasher, do not attempt to close
the door for one minute after it has opened. For
effective drying, keep the door open for 30 minutes
after a programme has ended. Do not stand in front of
the door after the auto-open signal sounds.
In the case of a malfunction, repair should
only be performed by an authorised service company,
otherwise the warranty will be void.
Before repair work, the machine should be
disconnected from the mains. Do not pull the cable to
unplug the machine. Switch off the water tap.
Operation at a low voltage will cause a
decline in performance levels.
For safety, disconnect the plug once a
programme has finished.
To avoid an electric shock, do not unplug the
machine with wet hands.
Pull the plug to disconnect the machine from
the mains, never pull on the cord.
Safety information
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on XXXX XXX XXXX.
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

Getting to know your
Dishwasher 2

10
Getting to know your Dishwasher
You''ll be up and running in no time
Ready? Let’s begin...
Please read these instructions carefully. They contain
important information which will help you get the best
from your DW12LSINT and ensure safe and
correct installation and operation.
If you require any further assistance, our technical
experts are happy to help. For full details, refer to
the product support section at the end of these
instructions.
Getting to know your Dishwasher
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

Getting to know your Dishwasher
11
1. Upper basket with racks
2. Upper spray arm
3. Lower basket
4. Lower spray arm
5. Filters
6. Rating plate
7. Control panel
8. Detergent and rinse-aid dispenser
9. Cutlery basket
10. Salt dispenser
11. Upper basket track latch
12. Mini Active Drying Unit: This
system provides better drying
performance for your dishes.
12
Getting to know your Dishwasher
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
6
1
2
3
4
5
7
8
9
11
10

12
Getting to know your Dishwasher
You'll be up and running in no time
Capacity 12 place
settings
Dimensions
Weight
Width
Depth
820-870(mm)
598(mm)
570(mm)
Net weight 29,7 Kg
Operating
Voltage /
frequency
220-240V / 50 (Hz)
Total
current 10 (A))
Total power 1900(W)
Water
supply
pressure
Maximum:
1 (Mpa)
Minimum:
0.03 (Mpa)
Technical Specifications
Getting to know your Dishwasher
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

Getting to know your Dishwasher
13
Accessories
This machine includes the below accessories, please
install these parts before operating.
• Water Inlet Hose x1
• Drain Hose x1
Model Capacity Power Energy Class Drying Class
DW12SAEINT -DW12LSINTE1 12 pcs 1900W A++ A
Getting to know your Dishwasher
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your Dishwasher 3

16
WARNING: Use the new water inlet hose
supplied with your machine, do not use an old
machine’s hose.
WARNING: Run water through the new hose
before connecting.
WARNING: Connect the hose directly to the
water inlet tap. The pressure supplied by the tap
should be a minimum of 0.03 MPa and a maximum of
1 MPa. If the pressure exceeds 1 MPa, a pressure relief
valve must be fitted between the connection.
WARNING: After the connections are made,
turn the tap on fully and check for water leaks. Always
turn off the water inlet tap after a wash program has
finished.
Installing your Dishwasher
Bringing it all together
3.1 Positioning your Machine
When positioning the machine, place it in an area
where dishes can be easily loaded and unloaded. Do
not put the machine in an area where the ambient
temperature falls below 0°C.
Read all warnings located on the packaging before
removing the packaging and positioning the machine.
Place the machine close to a water tap and drain. Take
into consideration that the connections will not be
altered once the machine is in position.
Do not hold the machine by its door or panel.
Leave an adequate distance around the machine to
allow ease of movement when cleaning.
Ensure the water inlet and outlet hoses are not
squeezed or trapped and that the machine does not
stand on the electrical cable while positioning.
Adjust the feet so the machine is level and balanced.
The machine should be placed on flat ground
otherwise it will be unstable and the door of the
machine will not close properly.
3.2 Water Connection
We recommend fitting a filter to your water inlet supply
in order to prevent damage to your machine due to
contamination (sand, rust, etc.) from indoor plumbing.
This will also help prevent yellowing and deposit
formation after washing.
Note printing on the water inlet hose!
If models are marked with 25°, the water temperature
may be max. 25 °C (cold water).
For all other models:
Cold water preferred; hot water max.
temperature 60 °C.
3.3 Water inlet hose
An Aquastop water spout is available with
some models. Do not damage it or allow it to
become kinked or twisted.
Installing your Dishwasher
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.

Installing your Dishwasher
Bringing it all together
17
3.4 Water drain hose
Connect water drain hose directly to water drain hole
or to the sink outlet spigot. This connection should be
minimum 50 cm and maximum 110 cm from floor
plane.
IMPORTANT: Items will not wash properly if a
drain hose longer than 4 m is used.
3.5 Electrical Connection
WARNING: Your machine is set to operate
at 220-240 V. If the mains voltage supply to your
machine is 110 V, connect a transformer of 110/220
V and 3000 W between the electrical connection.
Connect the product to agrounded outlet
protected by a fuse complying with the values in
the "Technical Specifications" table".
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
e any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,ou requirIf y
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
Installing your Dishwasher
The earthed plug of the machine must be
connected to an earthed outlet supplied by
suitable voltage and current.
In the absence of earthing installation, an
authorised electrician should carry out an earthing
installation. In the case of use without earthing
installed, we will not be responsible for any loss of
use that may occur.
The plug on this appliance may
incorporate 13A fuse depending on the target
country. (For Example UK, Saudi Arabia)

Functions 4

20
Functions
Simple everyday use
The Control Panel
Functions
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 257 7271.
iv
12
i ii
3 4 iii vi
v
1. On/Off button
2. Programme Selection Button
i. Programme Leds
3. Half Load Button
ii. Half Load Led
4. Delay Button
iii. Delay Leds
iv. Salt Indicator
v. Rinse Aid Indicator
vi. End of Programme Indicator
1. On/Off Button
Switch the machine on by pressing On/Off
button. When machine is on, the End Of
Programme Indicator (vi) will illuminate.
2. Programme Selection Button
Select a suitable programme for your
dishes by pressing Programme Selection
button. The Programme Led (i)
corresponding to the selected programme
will illuminate and the End Of Programme
Indicator (vi) will switch off. The programme
will start automatically when the door is
closed.
3. Half Load Button
Press the Half Load button to reduce the
duration of the selected programme, and
therefore decrease your energy and water
consumption. When Half Load option is
selected, Half Load led (ii) will illuminate.
4. Delay Button
Press the Delay button to delay the start
time of a programme for 3, 6 or 9 hours.
Pressing once will delay the start time for 3
hours, pressing twice for 6 hours, and three
times for 9 hours. Press the Delay Timer
button to change or cancel the delayed
start time. The Delay led (iii) corresponding
to the remaining delay duration (3h, 6h, 9h)
will be on. If you switch off the machine
after activating the delay time, the delayed
time is cancelled.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and
"Cancelling a Programme" sections.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
Indicator (iv) will illuminate to indicate
the salt chamber needs filling.
NOTE: When there is insufficient
rinse aid, the Rinse Aid Lack Warning
Indicator (v) will illuminate to indicate
the rinse aid chamber needs filling.
Changing a Programme
Follow the steps below to change a
programme while in operation.
Open the door and select a new
programme using the Programme
Selection button.
After closing the door, the new
programme will resume the course
of the old programme.
NOTE: Open the door slightly at first
to stop a programme before it is
complete in order to avoid water spillage.
Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
When the door of your machine is
opened, the light corresponding
to the most recently selected
programme will illuminate.
Press and hold the Programme Selection
button for 3 seconds. The End Of
Programme Indicator will flash and the
programme light will switch off.
The water discharge process will start
after the door of the machine is closed
and will continue for 30 seconds. A
buzz
er will sound 5 times when a
programme is cancelled and the End Of
Programme Indicator will illuminate.