Bush LED24127DVDCNTD Manual

24” Combination LED TV/DVD
Installation&OperatingInstructions -Please keepforfuture reference
109/4527
LED24127DVDCNTD
IMPORTANT - Please read these instructions fully before installing or operating
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0345 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Issue 1 - 9/2/11

2
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Contents
Safety Information 3
Preparation 3
Intended Use 3
Power source 3
Positioning the TV 3
Power cord and plug 3
Moisture and Water 4
Ventilation 4
Heat sources and Flames 4
Headphone Volume 4
Wall Mounting (optional) 4
Cleaning 4
Batteries 4
Replacement Parts 5
Servicing 5
Taking out of service and storing 5
Symbols in this Instruction Book 5
Support 6
Getting Started 7
Notifications & Features & Accessories 7
Environmental Information 7
Standby Notifications 7
Features 7
Accessories Included 7
Control Buttons on the TV 8
TV Control Switch & Operation 8
Inserting the Batteries into the Remote 8
Connect Power 8
Antenna Connection 8
Notification 9
Specification 9
Quick Menu 9
Remote Control 10
Attaching the Stand 11
Connections 12
Switching On/Off 13
First Time Installation 13
Media Playback via USB Input 13
Media Browser Menu 13
TV Menu Features and Functions 14
General TV Operation 17
Using the Channel List 17
Configuring Parental Settings 17
Electronic Programme Guide (EPG) 17
Software Upgrade 17
Troubleshooting & Tips 18
Quick Menu 18
Teletext 18
Digital Teletext (for UK only) 18
Connectivity Functions 19
Connectivity Troubleshooting 21
Getting Started with Skype 25
Other Information 30
Supported File Formats for USB Mode 30
AV and HDMI Signal Compatibility 30
PC Input Typical Display Modes 30
Other Information 31
Plug replacement - UK and Ireland only 31
DVD Mode 32
Notes on Discs 32
Licence Notification 32
How to Watch a DVD 32
DVD Control Panel Buttons 33
Overview of the Remote Control 33
DVD Controls 34
DVD Mode supported file formats 35
Compatible disc types 35
General Playback 36
DVD Troubleshooting 36
The Argos Technical Helpline is here to help 37
Guarantee 38
Model number
BUSH DVB-T LED24127DVDCNTD

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 3
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
To operate yourTV in extreme ambientconditions
may cause the damage of the device.
If there is lightning or storms, or if the TV is not
going to be used for a while (e.g. if going away
on holiday), disconnect the TV set from the
mains. The mains plug is used to disconnect TV
set from the mains and therefore it must remain
readily operable.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Note : Follow the on screen instructions for operating the
related features.
IMPORTANT - Please read these instructions fully before installing or operating
Preparation
Place the device on a solid even surface. For
ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, do not place any objects on top of the set.
Use this device in moderate climates.
Operation temperature and operation humidity:
5ºC up to 45ºC, 85% rel. humidity max. (not blocking
ventilation openings).
Intended Use
This device is used to receive and display TV
programmmes.The different connection options make
an additional expansion of the reception and display
sourcespossible(variousexternaldevices).Thisdevice
is only suitable for dry interior use. This appliance is
intended solely for private domestic use and may not
be used for industrial and commercial purposes. We
exclude liability in principle, if the device is not used
as intended, or unauthorized modifications have been
made. To operate your LED TV in extreme ambient
conditions may cause the damage of the device.
WARNING: Never let people (including
children) with physical, sensory or mental
abilities or lack of experience and / or knowledge
unsupervised use electrical device!
Children may not recognize dangers right! The
swallowing of batteries can be fatal. Keep batteries
always out of reach of small children. If a battery
is swallowed, seek immediate medical attention.
Keep the packaging films out of reach of children,
there is a risk of suffocation.
Power source
•The TV should be operated only from a 220-240V
AC, 50 Hz outlet.
•Warning: Do not leave your TV in standby or
operating mode when you leave your house.
Positioning the TV
•Forventilation,pleaseleaveaclearspaceofatleast
10cm all around the TV.
•Do not block the ventilation openings.
•Do not placetheTVonslopingorunstablesurfaces,
the TV may tip over.
•To prevent damage to the TV, do not place any
objects on top of the TV.
•Only use the TV in moderate climates.
Power cord and plug
•The power cord plug should be easily accessible.
In case of storms and lightning, when going on
holiday, orwhen theTV is not usedfor a long period
of time disconnect the power cord from the mains
power socket.
•The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
accessible.
•Do not place the TV, furniture, etc. on the power
cord or pinch the cord.
•Handle the power cord by the plug, do not unplug
the TV by pulling the power cord.
•Never touch the power cord/plug with wet hands
as this could cause a short circuit or electric shock.
•Never make a knot in the power cord or tie it with
other cords.
•Power cords should be placed in such a way that
they are not likely to be stepped on or driven over.
•A damaged power cord/plug can cause fire or give
you an electric shock. When damaged it must be
replaced, this should only be done by qualified
personnel.

4
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Safety Information
Moisture and Water
•Do not usethisTV in ahumidor damp place(avoid
bathrooms, the sink in the kitchen, etc.
•Do not expose this TV to rain or water, as this may
be dangerous.
•Do not place objects filled with liquids, such as
flower vases, on top of the TV. Avoid from dripping
or splashing.
•If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualified
personnel before operating it any further.
Ventilation
•The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.
•To prevent overheating, these openings must not
be blocked or covered in anyway.
Heat sources and Flames
•DonotexposetheTVtodirectsunlight
or other heat sources.
•The TV should not be placed near to
open flames and sources of intense
heat such as an electric heater.
•Ensure that no open flame sources, such as lighted
candles, are placed on top of the TV.
HeadphoneVolume
•Excessivesoundpressurefromearphones
andheadphones cancausehearingloss,
please take care.
Wall Mounting (optional)
•To prevent injury, this TV must besecurely attached
to the wall in accordance with the installation
instructions (if the option is available).
Cleaning
•Beforecleaning,unplugtheTVfromthewallsocket.
•Do not use liquid or aerosol cleaners. Only use a
soft, dry cloth.
Batteries
•Warning: Incorrect installation of
batteries may cause battery leakage
andcorrosion, resultingindamageto
the remote control.
•Do not mix old and new batteries, or
batteries of different types.
•Do not dispose of batteries in a fire.
•Do not dispose of batteries with normal household
waste, take to a local recycling centre.
CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to
recharge non rechargeable batteries and under
no circumstances throw them into fire. Danger of
explosion. Do not use unequal batteries (old and
new, Alkaline and carbon, etc.) simultaneously. If
you will not use the device for a long time, remove
the batteries and store the device in a dry and dust
free place. Improper use of batteries may cause an
explosionorleakage.Ifthebatteries have leaked, use
gloves and clean the appliance thoroughly with a dry
cloth! Batteries should not be exposed to heat, such
as sunshine, fire or the like.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 5
Safety Information
Replacement Parts
When replacement parts arerequired,makesurethat
the service technician has used replacement parts,
which are specified by the manufacturer or have the
samespecifications as the originalone. Unauthorised
substitutions may result in fire, electrical shock or
other hazards.
Servicing
•Warning: Risk of electric shock, do not attempt
torepair, service ormodifythis TV yourself. Contact
the manufacturer, their approved service agent or
the Customer Helpline: 0345 604 0105.
Taking out of service and storing
Unplug the TV from the mains and pack the TV in
an appropriate cardboard box. Remove the batteries
from the remote control and pack the remote control
to the TV set.
NOTE: The TV set should be stored in a dry and dust-
free room.
Symbols in this Instruction Book
The following symbols are used in the Instruction
Book as a marker for restrictions and precautions
and safety instructions. Note such information for
security reasons.
WARNING
If you do not pay attention to such a marked warning,
it can cause serious injury or death. Note these
warnings strictly, in order to ensure a safe operation.
CAUTION
Such a precaution is marked, you should take up or
note, to avoid injury or property damage. Note these
instructionsstrictly,inordertoensureasafeoperation.
IMPORTANT
Warnings on the appliance and restrictions are
displayed like this. Read this information strictly
in order to operate the system correctly and avoid
damage.
NOTE: Information about the operation and
additional explanations are marked like this. To be
aware of such information is recommendedto ensure
that the functions can be used optimally.

6
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Support
The Argos Technical Helpline is here to help
Technical experts are available 7 days a week
•Simple help and advice on setting up your digital
equipment (image).
•Guidance on connecting other devices to your
television such as a DVD player, Sky, home cinema
system or a games console.
•Order spare parts, including that lost remote
control.
•Any other technical issues you may need
assistance with.
Call us today: 0345 604 0105
Local call rates applies*
Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential
lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 7
Getting Started
Notifications & Features & Accessories
EnvironmentalInformation
This television is designed to consume less energy
to help save the environment. To reduce energy
consumption, you should take the following steps:
If you set the Power Save Mode as Eco, the TV will
switch to energy-saving mode. The Power Save Mode
settings can be found in the ‘Picture’ section of the
Main Menu. Note that some picture settings will be
unavailable to be changed.
If Picture Off is selected, “Screen will be off in
3 seconds.”message will be displayed. Select
PROCEED and press OK to continue. The screen
will be off immediately.
When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.
Standby Notifications
1) If the TV does not receive any input signal (e.g.
from an aerial or HDMI source) for 5 minutes, the TV
will go into standby. When you next switch-on, the
followingmessagewillbedisplayed:“StandbyCause
No Signal” Press OK to continue.
2) If the TV has been left on and not been operated
fora while,the TV will go into standby. When you next
switch-on, the following message will be displayed.
“Standby Cause No Operation”Press OK to
continue.
Features
•Remote controlled colour TV.
•Fully integrated digital TV (DVB-T)
•HDMI inputs are for connecting a device that has
a HDMI socket.
•USB input.
•OSD menu system.
•Scart socket for external devices (such as DVD
Players, PVR, video games, etc.)
•Stereo sound system.
•Teletext.
•Headphone connection.
•Automatic programming system.
•Manual tuning.
•Automatic power down after up to six hours.
•Sleep timer.
•Child lock.
•Automatic sound mute when no transmission.
•NTSC playback.
•AVL (Automatic Volume Limiting).
•PLL (Frequency Search).
•PC input.
•Plug&Play for Windows 98, ME, 2000, XP, Vista,
Windows 7.
•Game Mode (Optional).
Accessories Included
•Remote Control
•Batteries: 2 xAAA
•Instruction Book
•Quick Start Guide
•Side AV Connection Cable
•Nero Media Home CD
•Wifi USB Dongle
•USB cable

8
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Control Buttons on the TV
TV Control Switch &Operation
1. Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection
switch
The Control button allows you to control the Volume/
Programme/ Source and Standby-On functions of
the TV.
To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button,
the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down
To change source: Press the middle of the button
twice, the source list will appear on screen. Scroll
through the available sources by pushing the button
up or down.
ToturntheTVoff:Pressthemiddleofthebuttondown
and hold it down for a few seconds, the TV will turn
into standby mode.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward
gently. Install two AAA batteries. Make sure to
match the + and - ends of the batteries in the
battery compartment (observe the correct polarity)
Replace the cover.
Connect Power
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the “aerial” plug to AERIAL INPUT (ANT)
socket located on the back of the TV.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 9
Specification
TV Broadcasting
PAL B/G D/K K
Receiving Channels
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Number of Preset
Channels
1000
Channel Indicator
On Screen Display
RF Aerial Input
75 Ohm (unbalanced)
Operating Voltage
220-240V AC, 50Hz.
Audio
SRS TruSurround HD
Audio Output Power
(WRMS.) (10% THD)
2 x 2,5
PowerConsumption
50 W
Weight
4,50
TV Dimensions DxLxH
(with foot)
134 x 569 x 384
TV Dimensions DxLxH
(without foot)
55 x 569 x 345
Operation
temperature and
operationhumidity:
5ºC up to 45ºC, 85%
humidity max
VESA
75 x 75 mm / M4
Display
16:9 display, 61 cm / 24”
Screen Size
Quick Menu
Quick Settings menu allows you to access some
options quickly. This menu includes Power Save
Mode, Picture Mode, Equalizer Settings, Favourites
and Sleep Timer options. Press Q.MENU button
on the remote control to view quick menu. See the
followingchaptersforthedetailsofthelistedfeatures.
Notification
“HDMI, the HDMIlogoandHigh-DefinitionMultimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”
SRS TruSurround HD is a trademark of SRS Labs,
Inc. TruSurround technology is incorporated under
license from SRS Labs, Inc.
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the
product or battery, please consider the collection
systems or facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates
that this battery contains lead.
Products
Battery

10
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Getting Started
Remote Control
1. Source
2. Sleep Timer
3. Internet Portal
4. Play
5. No function
6. Rapid reverse ( in media browser mode )
7. Mono/Stereo - Dual I-II / Current language (in
DVB channels)
8. Green button
9. Red button
10. Numeric buttons
11. Channel List/TV source
12. Menu
13. Volume up / down
14. Back button
15. Favourite channel list
16. Image size
17. My button 1 (*)
18. My button 2 (**)
19. Teletext
20. Electronic programme guide
21. Mute
22. Info
23. Exit (return)
24. Ok (confirm)
25. Programme up / down
26. Navigational buttons
27. Q.menu
28. Channel swap
29. Blue button
30. Yellow button
31. Subtitle on / off
32. Rapid advance
33. Stop
34. Pause (in media browser mode)
35. Multimedia browser
36. Picture mode selection
37. Standby button
38. Function LED
Using Mybutton 1 (*)
This button’s main function is to run Youtube link.
However, if you want to change this function, you can
pressMYBUTTON1 forfive seconds whenonadesired
source, channel or link, until the “MY BUTTON IS SET”
message is displayed on the screen. This confirms
that the selected MY BUTTON is now associated with
the selected function. Note that if you perform first time
installation, MY BUTTON 1 will return to its default
function.
NOTE: The Remote Control range is approximately
7m / 23ft.
Using MyButton 2 (**)
Press MY BUTTON 2 for five seconds when on a
desired source, channel orlink, until the “MY BUTTON
IS SET” message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 11
Getting Started
Attaching the Stand
1. Stand is placed on a flat surface (fig.1).
fig.1
2. The product is held over the stand so that it
coincides with the stand mounting point and then it is
left to be mounted with its own weight (fig.2).
fig.2

12
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
Connector
Type
Cables
Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
Side Audio/Video
Connection Cable PCAudio Cable
(Supplied) (Not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
AV Connection Cable
(supplied)
HEADPHONE
Headphone
Connection
(side)
PC to YPbPr
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
Getting Started
Connections
SIDE AV
SIDE AV
NOTE: When connecting a device via the YPbPr or Side AV input, you must use a connection cables
to enable connection. See the illustrations above. | To enable PC audio, you will need to use the SIDE AV
CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV
will automatically switch to AV mode.| When using the wall mounting kit (optional), we recommend that you plug all
your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the
TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 13
Getting Started
First Time Installation - USB Connections
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
To switch on the TV from standby mode either:
Press the “”button, P+ / P- or a numeric button on
the remote control.
Press the side function switch until the TV comes on
from standby.
To Switch the TV Off
Press the ““button on the remote control or press
the side function switch until the TV switches into
standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note:Whenthe TV is switchedto standby mode, thestandby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.
The First Time Installation (FTI) screen will be
displayed next. Set your preferences using the
navigation buttons and when finished, press OK to
continue.
If Store Mode (optional) is selected, Store mode
option will be available in other settings menu and
your TV’s settings will be optimized for best display
quality.Aconfirmationscreenwillbedisplayed.Select
YES to proceed.
If Home Mode is selected, Store mode will not be
available after the First Time Installation. Press OK
button to continue.
Aerial Installation
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE: You can press MENU button to cancel.
After all the available stations are stored, theChannel
Listwillbe displayedonthescreen. Ifyoulikehowthe
channels are sorted according to the LCN (*), please
select “Yes” and than press OK.
PressMENU buttonto quitchannellistandwatchTV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence (if available).
Media Playback via USB Input
You can connect a 2.5”and 3.5”inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT! Back up your files before making
any connections to the TV. Manufacturer will not
be responsible for any file damage or data loss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32
and NTFS disk formatting but recording will not be
available with NTFS formatted disks.
While formatting a USB hard disk that has 1TB (Tera
Byte)ormorefilecapacity,youcanexperienceproblems
with the formatting process. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and USB device itself. Do
not pull out USB module while playing a file.
Media Browser Menu
You can play photo, music, and movie files stored
on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the MENU button while in the
Media Browser mode will access the Picture, Sound
and Settings menu options. Pressing theMENUbutton
again willexitfromthis screen. You can set your Media
Browser preferences by using the Settings Menu.
Loop/Shuffle Mode Operation
Start playback with and TV plays next file and loop
activate the list.
Start playback with OK and the same file will be played in a
activate loop (repeat).
Start playback with OK/ and thefilewillbeplayedinashuffle.
activate

14
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
TV Menu Features and Functions
Picture Menu Contents
Mode
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema,Game,Sports ,Dynamic and Natural.
Contrast
Sets the lightness and darkness values of the screen.
Brightness
Sets the brightness value for the screen.
Sharpness
Sets the sharpness value for the objects displayed on the screen.
Colour
Sets the colour value, adjusting the colors.
PowerSaveMode
To set the Power Save Mode as Eco, Picture Off and Disabled.
(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)
Backlight
(Optional)
This setting controls the backlight level. The backlight function will be inactive if the Power Save
Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the
picture mode is set to Game.
Noise
Reduction
If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting
to reduce the amount of noise.
Advanced Settings
Dyanmic
Contrast
You can change the Dynamic Contrast ratio to desired value.
Colour Temp
Sets the desired colour tone.
Picture Zoom
Sets the desired picture size from picture zoom menu.
Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching)
Film Mode
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast
motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
RGB Gain
You can configure the colour temperature values using the RGB Gain feature.
Reset
Resets the picture settings to factory default settings.(Except Game Mode)
Autoposition
(in PC mode)
Automatically optimizes the display. Press OK to optimize.
H Position (in
PC mode)
This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position (in
PC mode)
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock (in
PC mode)
Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase (in PC
mode)
Depending on the resolution and scan frequency that you input to the TV set, you may
see a hazy or noisy picture on the screen. In such a case you can use this item to get
a clear picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 15
TV Menu Features and Functions
Sound Menu Contents
Volume
Adjusts the volume level.
Equalizer
Selects the equalizer mode. Custom settings can be made only when in user mode.
Balance
This setting is used for emphasizing left or right speaker balance.
Headphone
Sets headphone volume.
Sound Mode
You can select a sound mode. (If the selected channel supports).
AVL (Automatic
Volume Limiting)
Function sets the sound to obtain fixed output level between programmes.
Dynamic Bass
Enables or disables the Dynamic Bass.
SRSTruSurround
HD
Enables or disables the SRS TruSurround HD. When activated, some features in
the Sound menu can not be altered.
Digital Out
Sets digital out audio type.
Settings Menu Contents
ConditionalAccess
Controls conditional access modules when available.
Language
Configures language settings (may change depending on the country selected) Preferred and
curr ent set tings will be available. Current settings can be changed only if the broadcaster
supports.
Parental
Enter correct password to change parental settings. You can easily adjust child lock and
set new pin number in this menu. Once the child lock is activated, open browser app
on the portal will be disabled, it can be enabled again by deactivating the child lock.
Timers
Sets sleep timer to turn off the TV after a certain time. Sets timers for selected programmes.
Date/Time
Sets date and time.
Sources
Enables or disables selected source options.
Network Settings
(Optional)
Displays network settings. (Optional)
Other Settings: Displays other setting options of the TV set:
Menu Timeout
Changes timeout duration for menu screens.
Scan Encrypted
Channels
When this setting is on, the search process will locate theencrypted channels as well.
BlueBackground
Activates or deactivates the blue background system when the signal is weak or absent.
Software Upgrade
To ensure that your TV always has the most up to date firmware.
Application Version
Displays application version.
Hard of Hearing
Enables any special feature sent from the broadcaster.
Audio Description
Audio description refers to an additional narration track for blind and visually impaired viewers of
visual media, including television and movies. You can use this feature, only if the broadcaster
supports that additional narration track.
Note:Audio description sound feature cannot be available in recording or time shifting mode..
Auto TV Off
You can set the timeout value of auto off feature. When the timeout value is reached and the TV
has not been operated for a selected time, the TV will go into standby mode.
Standby Search
(Optional)
If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will
be searched. If the TV locates any new or missing broadcasts, a menu screen will be displayed,
asking you whether or not to execute these changes. Channel list will be updated and changed
after this process.

16
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
TV Menu Features and Functions
Store Mode
If you are displaying the TV in a store, you can activate this mode. Whilst Store
Mode is enabled, some items in the TV menu may not be available.
DLNA Renderer
DLNA renderer feature allows you to share files stored on your smartphone. If you
have a DLNA renderer compatible smartphone and software installed, you can
share/play photos with your TV. See instructions of your sharing software for more
information.
Power Up Mode
This setting confrigures the power up mode preference.
Virtual Remote
(optional)
Enables or disables the virtual remote feature.
Netflix
You can view your ESN(*) number and deactivate Netflix.
(*) ESN number is an unique ID number for Netflix, created especially to identify
your TV.
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
(If available)
Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:
Searches and stores analogue stations. Digital Aerial & Analogue: Searches
and stores aerial DVB and analogue stations. Digital Cable & Analogue:
Searches and stores cable DVB and analogue stations.
Manual Channel Scan
This feature can be used for direct broadcast entry.
Analogue Fine Tune
You can use this setting for fine tuning analogue channels. This feature is not
available if no analogue channels are stored.
First Time Installation
Deletes all stored channels and settings, resets TV to factory settings.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 17
General TV Operation
Using the Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
Configuring Parental Settings
To prohibit viewing of certain programmes, channels and
menus can be locked by using the parental control system.
Todisplayparentallockmenuoptions, thePINnumber
should be entered. Thefactory default PIN numberis
0000. After coding the correct PIN number, parental
settings menu will be displayed.
Menu Lock: Menu lock setting enables or disables
the menu access.
Child Lock: When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work. Also, access to
the Internet Browser will also be blocked whilst the
Child Lock is active.
Set PIN: Defines a new PIN number.
Note: Ifthe Countryoptionis set to France, youcanuse4725
as the default code.
Electronic Programme Guide (EPG)
Some, but not all channels send information about
the current and next programmes. Press the “ ”
button to view the EPG menu.
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays theprogrammes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
SUBTTL: Press “”button to view Select Genre
menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
INFO(İ): Displays, in detailed, information on the
programme selected.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK: Displays programme options.
Text (Search): Displays “Guide Search”menu.
(Now) : Shows the current programme.
Software
Upgrade
YourTViscapableoffindingandupdatingautomatically
via theAerial signal or over the Internet.
Software upgrade search via user interface
Simplynavigateonyourmainmenu.ChooseSettings
and select Other Settings menu. In Other Settings
menunavigateontotheSoftwareforUpgradeitemand
pressOK buttontocheckforanewsoftwareupgrade.
Note : Internet connection is needed. If an internet
connection is not available, try to upgrade via
broadcast. If a new upgrade is found, it starts to
download the upgrade. Press OK to continue with
the reboot operation.
Background search and upgrade mode
•While TV is connected to Internet, in background
it searches for critical software upgrades. If a critical
software upgrade is found it downloads the upgrade
silently. When download completes with success a
message is displayed for reboot operation to activate
new software. Press OK to continue with the reboot
operation.
3 AM search and upgrade mode
While the TV is connected to an aerial signal. If
Automatic scanning in the Upgrade Options menu
is enabled, the TV wakes up at 03:00 and searches
broadcast channels for new software upgrades. If
new software is found and downloaded successfully,
the next time the TV powers up , it will have the new
software version.
Note: If the TV fails to come on after the upgrade unplug the
TV for 2 minutes and plug in again.
Manual Software Update
Ensure that the ethernet cable is connected to your
TV.IftheethernetcableisconnectedtotheTV,ensure
that the TV is receiving. Check that the Good is
present in the following menu
path:
Menu-> Settings->Network Settings ->Configuration
Status -> Connected
Go to Settings tab from the main menu and select
Other Settings. Highlight Software Upgrade and
press OK.
Select Scan for Upgrade and press OK
button.
An OSD screen including the progress bar will be
visible under the Software upgrade” title.
A warning screen will be displayed on the screen,
stating that the TV will be rebooted. Press OK button
to finalize upgrade process and reboot TV.

18
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
General TV Operation
Troubleshooting & Tips
Tv will not turn on
Make sure the power cord is plugged in securely to
wall outlet. The batteries in the remote control may be
exhausted. Press the Power button on the TV.
Poor picture
•Have you selected the correct TV system?
•Lowsignallevelcancausepicturedistortion.Please
check antenna access.
•Check if you have entered the correct channel
frequency if you have done manual tuning.
•The picture quality may degrade when two devices
are connected to the TV at the same time. In such
a case, disconnect one of the devices.
No picture
•No Picture means that your TV is not receiving a
transmission. Have youselectedthecorrectbutton on
the remote control? Try once more. Also make sure
the correct input source has been selected.
•Is the antenna connected properly?
•Is the antenna cable damaged?
•Are suitable plugs used to connect the antenna?
•If you are in doubt, consult your dealer.
No sound
•HastheTVbeensettomute?Tocancelmute,pressthe
“ ”button, or increase the volumelevel.
•Sound is coming from onlyone speaker. Is thebalance
setto oneextreme?SeeSound Menu section.
Remote control - does not operate
•The batteries may be exhausted. Replace the
bateries.
Input sources - can not be selected
•If you cannot select aninput source, it is possible that
no device is connected. if not
•ChecktheAVcablesandconnectionsifyouhavetried
to connect a device.
Recordingunavailable
To record a programme, you should first connect a
USB disk to your TV while the TV is switched off.
Youshould thenswitch onthe TV to enablerecording
feature. If you cannot record, try switching off the TV
and then re-inserting the USB device.
USB is too slow
If a “USB is too slow”message is displayed on the
screen while starting a recording, try restarting the
recording. If you still get the same error, it is possible
that your USB disk does not meet the speed
requirements. Try connecting another USB disk.
Quick Menu
QuickSettingsmenuallowsyoutoaccesssomeoptions
quickly.ThismenuincludesPowerSave Mode, Picture
Mode, Equalizer Settings, Favourites and Sleep
Timer options. Press Q.MENU button on the remote
control to view quick menu. See the following chapters
for the details of the listed features.
Teletext
Press “”button to enter. Press again to activate mix
mode. Press once more to exit. Follow the instructions
displayed on digital teletext screen.
Digital Teletext (for UK only)
Press “”button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the “ ”button is pressed again, the TV returns
to television broadcast.

For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105 19
General TV Operation
ConnectivityFunctions
Connecting to a Wired Network
•Connect broadband ISP connection ethernet cable
to the ETHERNET INPUT of your modem.
•Ensure that Nero Media Home software is installed
to your PC.(for DLNAfunction). See AppendixA
•Connect your PC to the one of your modem’s LAN
connectors(e.g.LAN1)byusingaproperLANcable.
•Use another LAN output of your modem (e.g. LAN
2) to enable the connection to your TV.
Broadband ISP
Connection
Lan(Ethernet cable)
Rear of TV
•To access and play shared files, you must Select
MediaBrowser.PressMenubuttonandselectMedia
Browser. Press OK to continue. Select the desired
file type and press OK. You must always use the
Media Browser screen to access and play shared
network files.
•PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with wired
connection for higher playback quality.
To configure wired settings please refer Network
Settings section in Settings menu.
•You might be able to connect your TV to your LAN
network depending on your network’s configuration.
In such a case, use an ethernet cable to connect
your TV directly to the network wall outlet.
Connecting to a Wireless Network
IMPORTANT: “Veezy 200”USB dongle (sold
separately) is required to use wireless network
feature.
•To make your modem’ s SSID visible, you should
change your SSID settings via modem’s software.
The TV cannot connect to the networks with hidden
SSID.
For connecting to a wireless LAN network, you
should perform the following steps:
1. Connect broadband ISP connection ethernet
cable to the ETHERNET INPUT of your modem.
2. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
3. Afterwards, you should connect wireless adaptor
to one of the USB inputs of the TV.
4. ToconfigurewirelesssettingspleasereferNetwork
Settings section in the following sections.
Broadband ISP
Connection
USB Inputs (Side of the TV)
Wireless Lan
Adaptor
•A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands designed to
increase bandwidth. Optimized for smoother and
faster HD video streaming, file transfers, and
wireless gaming.
•UseLANconnectionforquickerfilesharing between
other devices like computers.
•Thefrequencyandchanneldifferdependingonthearea.
•The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the configuration of these
products, the radio wave conditions, the line traffic,
and the products that you use. The transmission
may also be cut off or get disconnected depending

20
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105
General TV Operation
on the radio wave conditions DECT phones, or any
other WiFi 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
•The location where the transmission is most effective
differs depending on the usage environment.
•WirelessLANadaptorshouldbeconnecteddirectlytothe
TV’s USBport. USBhubs arenotsupported.
•You can plug your wifi dongle into the supplied dock
In cases where network quality is poor and the wifi
dongle needs to be placed to a location with better
signal quality.
•Wireless LAN adaptor supports 802.11 a,b,g & n type
modems. It is highly recommended that you should
use IEEE 802.11n communication protocol in order
toavoidanypossibleproblemswhilewatchingvideos.
•Use the other usb input, if you experience problems
with audio/video performance.
•You must change your modem’s SSID when there
are any other modems around with the same SSID.
Configuring Network Settings
Your TV’s Network Settings include Wired and Wireless
Connection options. However, if your TV does not have
USB Wi-Fi dongle (sold separately), you should use
Wired Connection type. If you try to connect via Wireless
Connection when your TV does not have a USB Wi-Fi
dongle, a warning screen will appear and the TV will not
get an IP address. Try connecting the LAN cable after
this and then the TV will be able to get an IP address.
Configuring Wired Device Settings
If you are connecting the TV via ETHERNET INPUT,
select Network Type as Wired Device to configure.
Network Type
Network type can be selected as Wired or Wireless
device, in accordance with the active connection to the
TVset. SelectthisasWiredifyouhaveconnectedtothe
TV a LAN cable. Select as Wireless if you connect via
the wireless USB dongle (sold separately).
Configuration Status
Thissectiondisplaysthestatus oftheconnection.Select
Connected if youwantto activate connection.Selectas
Not Connected to end an active connection.
IPAddress
If an active connection is available, the IP address will
be displayed on this section. If you want to configure IP
address preferences, press GREEN button and switch
to the advanced mode.
Configuring Wired Network Settings in
Advanced Mode
While in Advanced Mode, press RED button to edit
settings. When finished, press OK to save, Press
RETURN/BACK to cancel.
IMPORTANT:“Veezy200”USB dongleis required to
use wirelessnetwork feature.
Wi-Fi feature can be used for a wireless network
connection.IfyouhavetheVeezy200WifiDongle(sold
separately), select Network Type as Wireless Device
to start connection process.
To enable Wi-Fi feature, profiles should be configured
properly.PleaseplugintheWi-Fidongle(soldseparately)
tooneofthe USBports.
Press YELLOW button to scan wireless network.
Afterwards, available network list will be displayed.
Please select your desired network from the list.
If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via navigation
buttons and OK button on the remote control.
Wait until the IP the address is shown on the screen.
This means that the connection is now established. To
disconnectfromawirelessnetwork,youshouldhighlight
Configuration Status and press OK.
You can navigate between menu tabs by pressing left/
right buttons. The help bar on the bottom of the dialog
shows features that you may use. Press BLUE button
to check your internet connection speed.
You can check thesignal strenght by using thenetwork
settings menu for the wireless device mode.
Information
Configuration Status: Displays wi-fi status as
connected or not connected.
IPAddress: Displays the current IP address.
Network Name: Connected networks’name will be
displayed.
Press GREEN button to switch to advanced mode and
then press OK button to edit settings.
Delete Saved Wifi Profiles
Saved profiles will be deleted if you press red button
while wireless device selection osd is on the screen.
Connecting to your Cell Phone via WiFi
(Optional)
•If your cell phone has WiFi feature, you can connect
your cell phone to your TV by using WiFi connection
via a router, in order to play content from your phone.
For this, your cell phone must have an appropriate
sharing software.