Bushranger 61X08B User manual

WHEELIE BIN
61X08B

| Wheelie Bin | Wheelie Bin
Page 2 Page 3
Congratulations on your purchase of the Bushranger® Wheelie Bin. To take full
advantage of this product, please read this manual carefully before using. Retain
this manual for future reference for installation and warranty.
Great for
Keep your dirty gear and rubbish outside
Easy to use
Built to last
Features
• Garbage and Rubbish.
• Wet and muddy recovery gear.
• Dirty clothes and boots.
• Wetsuits, towels and beach gear.
• Keeps your rubbish away from wildlife.
• 57 litres of storage + 2 x 5 litre mesh side pockets.
• Removable divider provides two separate 28 litre compartments for dual usage.
• 3 vented drain holes in the base to allow liquids to drain and makes hosing clean
a breeze.
• 4 buckles for easy access to the main compartment.
• 1 buckle for easy access to each of the mesh side pockets.
• 50mm harness mounting system with snap-lock buckles.
• 3 possible mounting styles for different vehicles and applications.
• Suits most vehicles with rear mounted spare wheel.
• Center divider to keep contents separate.
• Especially manufactured and reinforced 1000D material.
• Double thickness and padded base and partial side walls.
• 50mm webbed mounting straps.
• UV tested in Australia by a certied laboratory to AS2000.2.3.1-01.
• Highly reective strip for increased visibility of your vehicle.

| Wheelie Bin | Wheelie Bin
Page 4 Page 5
Care and tting guidelines
• Ensure Wheelie Bin is not stored in direct sunlight or wet / humid environments.
• Do not expose Wheelie Bin to any petroleum-based, acids or alkaline products.
• Clean Wheelie Bin regularly with a non-abrasive sponge or similar in warm water and
pH neutral car washing liquids only. Allow to dry in the shade to preserve shine and
promote longevity.
• Always ensure Wheelie Bin is dry prior to being stored.
• Prior to strapping the “Wheelie Bin” to a rear mounted spare wheel, check that all
wheel nuts are tightened to the correct torque.
• Do not reduce visibility of the licence plate in anyway.
• Always check lid is completely buckled closed before driving.
• Regularly check buckles and straps are secure when driving.
• Check local laws and regulations before attaching any external components onto
your vehicle.
• Conrm the spare wheel is suitable for mounting of this product (fully laden) with the
vehicle manufacturer and the manufacturer of any aftermarket wheel carrier installed
before using this product.
• Always consider the additional stresses from the environment and application in
determining if the product can be used.
• Avoid carrying sharp objects (including broken glass).
• Avoid carrying harmful chemicals/oils.
• Never carry hot materials .
The Bushranger Wheelie Bin is normally strapped to vehicles with a rear mounted spare wheel.
Adjustable pull-straps allow the “Wheelie Bin” to suit most vehicles.
Note: For clarity purposes, some images included with these instructions are shown with the
wheel removed from the vehicle.
Care & Maintenance
Vehicle
Product
Before First Use
WARNING
• Evidence of heavy impacts.
• Cuts and abrasions.
• Badly worn
• Seam damage
• Deformation
Position the Wheelie Bin over the wheel and the horizontal bracing strap should be snug
across the top edge of the tyre.
The harness straps are in a vertical position.
Wheel mounting bracket
Harness straps
View from behind the wheel
Arrange the Harness (webbing straps) so that the straps go behind the wheel.
There are several methods in which the “Wheelie Bin” may be strapped to a vehicles spare
wheel dependent upon the users’ preference.
Damage may include:
Step 1
Step 2
Method 1: Vertical (Classic) method:
Fitting Guidelines
Prior to using the Wheelie Bin or any of its components inspect for damage.
Safety & Inspection

| Wheelie Bin | Wheelie Bin
Page 6 Page 7
1. Our Warranty
We warrant to you that the Kingsley product is free from defects in workmanship and materials for the
warranty period.
2. Fitting and use
Please ensure you:
a. t the Kingsley product in accordance with the product information and all relevant vehicle safety and
compliance laws
b. use the Kingsley product for the purpose for which it was originally designed and in accordance with
the product information and all relevant vehicle safety and compliance laws
3. Exclusions
Our warranty doesn’t cover:
a. normal wear and tear
b. tting the Kingsley product other than in accordance with the product information and any relevant
vehicle safety and compliance laws, including incorrect tting
c. using the Kingsley product other than for the purpose for which it was originally designed or other
than in accordance with the product information and any relevant vehicle safety and compliance
laws, including unusual, improper or negligent use or misuse or overloading
d. misuse or neglect of the Kingsley product, including improper repair or maintenance or failing to repair
or maintain
e. alteration, abuse, acts of nature, terrorism, vandalism, collision, road hazards or adverse conditions
4. Making a claim
Please immediately contact us as soon as you become aware of a possible defect in the Kingsley product.
We’ll arrange for you to either attend a Kingsley outlet (at your cost) for a Kingsley representative to inspect
the Kingsley product (as tted to your vehicle) or for you to return the Kingsley product to us. We’ll also
request you to provide the purchase receipt and complete a warranty claim form. In order to ensure our
warranty is not voided, please keep the purchase receipt as proof of purchase and don’t remove the tted
Kingsley product from your vehicle before contacting us. If your claim’s in order, we’ll notify you and (at
our sole discretion) either repair or replace the defective workmanship or materials (at our cost) or refund to
you the purchase price you paid for the defective Kingsley product. If further information or investigation is
required or if the claim does not meet the requirements under our warranty, we’ll let you know.
5. Australian Consumer Law
The Kingsley product comes with guarantees that can’t be excluded under the Australian Customer
Law. You’re entitled to a replacement or refund if there’s a major failure and compensation for any other
reasonably foreseeable loss or damage. You’re also entitled to have the Kingsley product repaired or
replaced if it fails to be of acceptable quality and the failure doesn’t amount to a major failure.
6. Other consumer rights
The benets to you under our warranty are in addition to any other rights and remedies you are entitled to
under relevant consumer laws. Our warranty replaces any other warranty given by Kingsley or it’s supplier in
respect of the Kingsley product.
7. Terms
The following terms have the following meanings:
Kingsley Products - Warranty Policy
Term Meaning
Product
information
information about the Kingsley product which may be contained in any of the documentation
provided with the Kingsley product, including safety instructions, installation instructions,
operating instructions, owner’s manual, service manual, labels and packaging
Purchase date the date you purchased the Kingsley product from a Kingsley outlet, as specied in the
purchase receipt
Kingsley outlet an outlet authorised by Kingsley to sell Kingsley products
Kingsley products products or components which Kingsley manufacturers or sells through Kingsley outlets
Warranty period commences on and from the purchase date and ends as follows:
Wheelie Bin- 5 years
We/Us Kingsley Enterprises Pty Ltd (ABN 23 001 592 749)
E: [email protected]
A: 6A Brooks Road, Ingleburn NSW 2565
P: 1800 654 767
W: www.kingsleyenterprises.com.au
You the purchaser of the Kingsley product from a Kingsley outlet
The harness straps are crossed over under the spare wheel mounting bracket.
Method 2: Cross over method:
View from behind the wheel
Wheel mounting bracket
Harness straps
Horizontal bracing strap
Check that the wheel mounting bracket will not damage the straps and the straps will
not damage the vehicle.
Engage both buckles. Tighten both pull straps so that both
buckles are secure.
Tighten both pull straps so that both
buckles are snug against the tyre.
Check to ensure that harness and bag is snug on
the wheel. Check both buckles are rmly engaged
and secure.
Excess straps may be loosely tied together to stop
apping or dragging.
Step 3 Step 5
Step 4 Step 6

| Wheelie Bin
Page 8
bushranger.com.au
Free Call |1800 654 767 (Australia only)
International |[phone]
Fax |[phone]
Email | [email protected]
Address | 6A Brooks Road, Ingleburn NSW 2565