by Lassen CONEKT User manual

BYLASSEN.COM
CONEKT
~
ASSEMBLY GUIDE

x28
x4 x8
x8
x1
x8
x8
x2
x1
x4
CONEKT
ASSEMBLY GUIDE FOR CONEKT DINING TABLE
1
23
45
67
8 9
~
1Package contents.
2Screw the eight threaded metal rod pieces clockwise into the matching holes in the leg
sections.
3Insert the eight wooden dowels into the matching holes in the leg sections.
4Mount the leg sections to the tabletop. Please make sure not to scratch the tabletop when
facing upside down by placing a blanket underneath.
5Attach the washer and nut to the threaded metal rod. Quick tip – it can be easier to mount
the nut if the leg sections are left with a gap of approx. 10mm to the end of the tabletop.
6Use the spanner to tighten the nut by turning it clockwise. Make sure all eight nuts are
tightened evenly.
7Place the brackets in all four corners, making sure that the brackets with the sunken holes
are placed on the outside.
8Insert the screws into the pre-drilled holes and tighten them by turning them clockwise.
9You are done. Enjoy!
approx. 10 mm
washers
nuts
spanner
metal
rods
wooden
dowels
leg
sections
screws tabletop
inner
brackets
x28
x8
x8
x1
x8
x8
x2
x1
outer
brackets