Byrobot Drone Fighter HD CAM User manual

User Manual

1. Micro Camera
2. Micro SD Memory Card
3. OTG(On
- to - Go) Memory Card Reader
4. Motor Bracket Adapter
5. User Manual
Components
Micro SD
Memory Card
OTG(On
- to - Go)
Memory Card Reader Motor Bracket Adapter
Micro Camera

Cautions
Weight
Focal length
Angel of view
Camera FPC length
Support working voltage
Current Consumption/3.7V
Photo resolution
Video resolution
Frame rates
Memory type
4.25g
4.6mm
70 degrees
26.6mm
2.5~4.2V
120~130mA
1280 X 720 pixels
HD 720 P 1280 X 720 pixels
30FPS
Micro SD card ( Max. 32GB )
Specifications
1.Be sure to know and follow instructions before use.
2.Do not tamper with the structure of this product.
3.Prevent electrical shocks from damaging this product.
4.Keep this product from other electronic products,
magnetic objects, or wireless devices.
5.Please check the available memory before taking
videos and photos.
(4GB -> 1 hour video)
6.If the camera is kept on for an extended period
of time, it will heat up.
7.Please point the camera lens upwards before
changing the battery.

How to equip the camera
3. Remove the battery holder
7. Attach the canopy to
the drone body
1. Remove the
propeller guards
2. Remove the canopy
4. Equip the motor brackets
with the motor bracket adapters 5. Connect the camera wire to the drone body
6. Attach the camera holder to the drone body.

USB ON
Insert the Micro SD card
in the camera.
Insert the fully charged
battery.
Ready to shoot
Shooting
Insert the battery and
turn on the controller.
*Caution!! The words on the card
should face downwards
1. Stand-by : Blue Light ON
2. Video
•Start : Press the video button
-> Red Light ON
•Finish : Press the video button again
-> Red Light OFF
(*CAUTION! Please press the video button
to end the recording before removing
the memory card from the camera to ensure
that the video is safely stored.)
3. Photo
•Press the photo button -> Red Light blinks once.
(*CAUTION! You cannot take a photo while
recording a video)

Install MX Player
in android play store.
How to watch the video on android phones.
(The iPhone is not supported)
Select your video in the folder
(stoage/UsbDirveA/VIDEO)
1. Click H/W menu
2. Select S/W decoder
Camera LEDs
Control Buttons
USB ON
PHOTO BUTTON
VIDEO BUTTON
START / FINISH
USB ports
Power switch
BLINGKING
OFF
BLINGKING
(one time)
ON
ON
ON
ON
ON
Photo
Video (Rec)
No card
HD Cam
Stand - by
RED LED BLUE LED
1. H/W click
2. S/W decoder
select
1
Q
23

Check the dataCheck the data
You can check the data
to connect the reader
to smart device or PC.
Insert the card
into the reader.
Remove the card from
the camera
(Push the card briefly)
■ CS Center
---------------------------------------------
• Customer Support Center of
BYROBOT Co.,Ltd.
• Mail : [e-mail]
■ Onlines
---------------------------------------------
• www.byrobot.co.kr
• facebook.com/DroneFighter165
• Youtube.com/user/BYROBOTCO
*CAUTION! Please make sure
to insert the card as pictured