BYSTRO BYS-WC132BKBI User manual

Models:
BYS-WC132BKBI
BYS-WC132SSBI
Models:
BYS-WC208BKFS
BYS-WC208SSFS
Models:
BYS- WC430BKBIFS
BYS- WC430SSBIFS
INSTRUCTION MANUAL
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES. KEEP THIS
MANUAL IN A SECURE LOCATION.

1
•Read all instructions before using the appliance.
•This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
•WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
•WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of
appliance.
•WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
•WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other
than those recommended by the manufacturer.
•WARNING: Do not damage the refrigerant circuit.
•WARNING: Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
•WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
ￚ Opening the door for long periods can cause a significant increase of the temperature in the
compartments of the appliance.
-Clean regularly surfaces that can come in contact with food and accessible drainage systems.
-If the refrigerating appliance is left empty for long periods, switch off, defrost, clean, dry, and leave the
door open to prevent mould developing within the appliance.
•Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
•This appliance is intended to be used in household and similar applications such as
-Staff kitchen areas in shops, offices and other working environments;
-Farm houses and by clients in hotels, motels and other residential type environments;
-Bed and breakfast type environments;
-Catering and similar non-retail applications.
•Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an adapter, and do not
use an extension cord.
•It is recommended that a separate circuit, serving only your appliance, be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
•Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
•Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected.
•Do not connect or disconnect the electric plug when your hands are wet.
•Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
•Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in
this manual. All other servicing should be referred to a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS

2
•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
•Use two or more people to move/install the refrigerator. Failure to do so can result in back or other
injury.
•To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 50°F (10°C) and below 109°F (43°C). This unit
must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
•The appliance should not be located next to ovens, grills or other sources of high heat.
•The appliance must be installed with all electrical connections in accordance with state and local codes. A
standard electrical supply (220-240V AC 50 Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
•Do not kink or pinch the power supply cord of the appliance.
•The fuse (or circuit breaker) size should be 10 amps or higher.
•It is important for the appliance to be leveled in order to work properly. You may need to make several
adjustments to level it.
•Although the unit has been tested at the factory, due to transit and storage, you should clean the
appliance before use.
•Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or
discolor the interior.
•Do not use this apparatus for other than residential purposes.
•This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is
environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the
greenhouse effect. Care must be taken during transportation and setting up of the appliance that no
parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.
•In the event of any damage:
Avoid open flames and anything that creates a spark,
Disconnect from the electrical power line,
Air the room in which the appliance is located for several minutes, and
Contact the Service Department for advice.
•The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a
leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For
every ounce of coolant, at least 325 cubic feet of room space is required. The amount of coolant in the
appliance is stated on the data plate on the back of the appliance. It is hazardous for anyone other than
an authorized Service Person to carry out servicing or repairs to this appliance.
•Take serious care when handling, moving, and using the appliance to avoid either damaging the
refrigerant tubing or increasing the risk of a leak.
•Replacing component parts and servicing shall be done by factory authorized service personnel so as to
minimize the risk of possible ignition due to incorrect parts or improper service.
•When you dispose the appliance, take off the door and leave the shelves in place so that children may not
easily climb inside. And make sure the coolant circuit, particularly the heat exchanger at the back/bottom
of the unit is not be damaged.
•The appliance must be positioned so that the plug is accessible after installed.
•The recycle symbol on the product or its packaging indicates that this product is not to be
handled as normal household waste and it is to be taken to a recycling collection point for
electrical and electronic goods.

3
Before Using Your Appliance
•Remove the exterior and interior packing.
•Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
•Install the handle on the left side of the door using the screws that are provided.
Installation of Your Appliance
•This appliance is designed for free standing or built-in (fully recessed) installation.
•Place your appliance on a floor that is strong enough to support it when it is fully loaded. To level
your appliance, adjust the front leveling legs at the bottom.
•Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extremely cold ambient temperatures may also cause the unit not to perform
properly.
•Avoid locating the unit in moist areas.
•Plug the appliance into an exclusive, properly installed and grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified and authorized products
service center.
•This appliance is intended to be installed in a space between two units.
The minimum space required is:
BYS-WC132BKBI, BYS-WC132SSBI - 600mm wide × 600mm deep × 875mm high
BYS-WC208BKFS, BYS-WC208SSFS - 600mm wide × 685mm deep × 1085mm high
BYS-WC430BKBIFS, BYS-WC430SSBIFS - 600mm wide × 685mm deep × 1825mm high
Please note: When the product is installed, there should be a small ventilation gap between the top of
the unit and the underside of any fitting above (6mm or 1/4").
Installation of the Handle
To install the handle, please follow these instructions:
•Carefully pull the door gasket (seal) away from the door in the area where the handle will be attached.
•Place the handle over the screw holes on the outside of the door and attach it with the screws that
have been provided. Tighten the screws.
•Press the door gasket back into its groove.
-SAVE THESE INSTRUCTIONS -
INSTALLATION INSTRUCTIONS

4
How to put off the shelves
1. Take out the wine bottles from the shelves.
2. Please keep the door opened fully all the way before pulling the shelves out.
3. Touch the plastic buckles in the left and right of the sliding rail, pressing the left plastic buckle
upwardly and pressing the right plastic buckle downward at the same time, and then pushing out the
shelf.
Storage
•Bottles can differ in size. Accordingly, the actual number of bottles you can store may vary.
•The approximate maximum bottle capacity can be achieved when storing traditional 750 ml
Bordeaux bottles in bulk storage.
•You may load your wine bottles in single rows or by stacking while taking note of the following: if you
do not have enough bottles to fill your wine cellar, it is better to distribute the load throughout the
wine cellar so as to avoid “all on top” or “all below” type loads.
Do remove or relocate adjustable wooden shelves to accommodate larger types of bottles or
increase the capacity of the cellar by stacking the bottles when necessary. (See instructions
for removing shelves, above.)
Keep small gaps between the walls and the bottles to allow air to circulate. As in an underground
cellar, air circulation is important to prevent mold and for a more homogeneous temperature
within the cellar.
To facilitate air circulation, do not overload your wine cellar.
Avoid obstructing the internal fans (located inside on the rear panel of the wine cellar).
To prevent bottles from falling, do not try to slide the shelves outward beyond the fixed
position.
Do not pull out more than one loaded shelf at a time as this may cause the wine cellar to tilt
forward if not properly installed.

Reversing the Door Swing
This appliance has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please follow the instructions below. To make the reversal, you will find two hardware pieces in
a plastic bag inside the appliance: the top left hinge and the bottom left hinge.
1. This appliance has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the
opening direction, please follow the instructions below:
2.Carefully lay the appliance on its back. Use cushioning to protect the floor and appliance.
3. Using a Philips screwdriver, remove the two screws and bottom right hinge beneath the door. Keep
the hinge in a safe place in case you need to reverse the door again in the future.
4. Carefully slide the door off and place it on a padded surface.
5. Remove the bottom support bracket from the right side.
6. Remove the top right hinge and keep in a safe place in case you want to reverse the door in the
future.
7. Remove the screws from the top left and transfer to the right.
8. Install the top left hinge.
9. Install the bottom left hinge to the door. Do not over-tighten the screw.
10. Rotate the door 180° and relocate it on the top hinge.
11. Install the bottom support bracket.
12. Adjust door alignment. When set, tighten screw on hinge.
5