BZB Gear BG-UHD-MVS42MA User manual

BG-UHD-MVS42MA
4K60 4x2 Multiviewer Seamless UHD Video Matrix Switcher
User Manual

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 2

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
TABLE OF CONTENTS
Statement 4
Safety Precaution 4
Introduction 5
Features 5
Packing List 5
Specifications 6
Operation Controls and Functions 7
IR Remote 9
EDID Settings 10
Video & Audio 10
Multiview 11
OSD Menu Navigation 11
RS-232 Command 13
Application Diagram 20
Tech Support 21
Warranty 22
Mission Statement 23
Copyright 24
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 3

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
Statement
Please read these instructions carefully before connecting, operating, or configuring this
product. Please save this manual for future reference.
Safety Precaution
●To prevent damaging this product, avoid heavy pressure, strong vibration, or immersion
during transportation, storage, and installation.
●The housing of this product is made of organic materials. Do not expose to any liquid,
gas, or solids which may corrode the shell.
●Do not expose the product to rain or moisture.
●To prevent the risk of electric shock, do not open the case. Installation and maintenance
should only be carried out by qualified technicians.
●Do not use the product beyond the specified temperature, humidity, or power supply
specifications.
●This product does not contain parts that can be maintained or repaired by users.
Damage caused by dismantling the product without authorization from BZBGEAR is not
covered under the warranty policy.
●Installation and use of this product must strictly comply with local electrical safety
standards.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 4

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
Introduction
The BG-UHD-MVS42MA is a 4x2 multiviewer and seamless UHD video matrix switcher that
was developed for the purpose of supporting higher output resolution such as 4K@60 to
display multiple sources on two screens. It can accept 4 HDMI inputs and combine the
video signals onto two HDMI UHD or HD displays independently.
Users can manage each input and create combinations of the four inputs on two displays
as well as adjust the position of the inputs. The BG-UHD-MVS42MA supports 8 display
modes and users can freely switch 4-channel HD input signals. This product supports a full
range of input video resolutions up to 4K@60 as well as audio de-embedding via RCA or
S/PDIF optical for external audio distribution systems.
This Matrix Switcher can be controlled via front panel buttons, IR remote, or RS-232
commands.
Features
●HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
●18Gbps uncompressed Bandwidth
●Input and output resolution up to 4K2K@60 4:4:4
●HDMI audio formats support LPCM, DD+, DTS, Dolby TrueHD, DTS HD-master
pass-through
●Seamless switching between input channels
●Combined multiple images or independent layouts to display on two UHD TVs
●Up to 8 display modes: Single, PIP, PBP(1), PBP(2), Triple(1), Triple(2), Quad(1),
Quad(2)
●Audio de-embedding via analog and optical fiber audio ports
●Control via front panel buttons, IR remote, RS-232 commands
●Output scaling
●Independent audio selection
●Advanced EDID management
●Compact design for easy and flexible installation
Packing List
●1x 4K60 4x2 UHD Video Matrix Switcher
●1x IR Remote
●1x 3 pin-3.81mm Phoenix Connector (male)
●1x 38KHz IR Receiver Cable (1.5m)
●2x Mounting Ears
●4x Machine Screws (KM3*4)
●1x 12V/2.5A Power Adapter
●1x User Manual
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 5

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2 / 1.x
Video Bandwidth
18Gbps
Video Resolution
Up to 4K2K@60 4:4:4
IR Level
5Vp-p
IR Frequency
38KHz
Color Space
RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
8/10/12-bit
Audio Formats
HDMI audio: PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True
HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio
Analog audio [3.5mm L/R]: PCM2.0
Optical fiber audio: PCM2.0/5.1/7.1CH, Dolby Digital/plus, DTS 5.1
ESD Protection
Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connection
Input ports
4 x HDMI IN [Type A, 19-pin female]
Output ports
2 x HDMI OUT [Type A, 19-pin female] 2 x L/R OUTPUT [RCA]
2 x OPTICAL OUTPUT [S/PDIF]
Control ports
1 x RS-232 [3 pin-3.81mm phoenix connector] 1 x IR EXT
[3.5mm Stereo Mini-jack]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
270mm [W] x 130mm [D] x 30mm [H]
Weight
906g
Power Supply
Input: AC 100 - 240V 50/60Hz
Output: DC 12V/2.5A (US/EU standard, CE/FCC/UL certified)
Power Consumption
15.72W (Max)
Operating Temperature
32 - 104°F / 0 - 40°C
Storage Temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no-condensing)
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 6

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
Operation Controls and Functions
Front Panel
No.
Name
Function Description
1
Power button
▪Short press this button to power on the device.
▪Long press this button for 1 second to enter the standby mode.
2
Power LED
The Power LED will illuminate green when the product is powered on and red
when the product is in standby.
3
OUT 1 LEDs
Signal source indicator for HDMI OUT 1 port.
In single screen display mode when the HDMI OUT 1 port outputs a signal from one
of the HD 1/2/3/4 inputs the corresponding green LED will illuminate.
In multiview mode all OUT 1 LEDs will illuminate green.
4
OUT 2 LEDs
Signal source indicator for HDMI OUT 2 port.
In single screen display mode when the HDMI OUT 2 port outputs a signal from one
of the HD 1/2/3/4 inputs the corresponding green LED will illuminate.
In multiview mode all OUT 2 LEDs will illuminate green.
5
IR Window
IR signal receiving window.
6
OUT 1 button
Input source switching button for the HDMI OUT 1 port which is only available on
single screen display modes.
7
OUT 1 Multiview button
Multiview display mode switching button for the HDMI OUT 1 port.
▪Short press this button to cycle select:
Single-PIP-PBP(1)-PBP(2)-Triple(1)-Triple(2)-Quad(1)-Quad(2)-single.
▪Long press this button for 3 seconds to switch the aspect ratio
(16:9/Full) for PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1)
/ Quad (2).
8
OUT 1 RES button
Output resolution switching button for the HDMI OUT 1 port.
▪Short press the RES button to cycle switch the output resolution of the HDMI
OUT 1 port (Please refer to the output resolution list of “Video & Audio”).
▪Long press the RES button for 3 seconds to switch the output resolution to
720P60.
9
OUT 2 button
Input source switching button for the HDMI OUT 2 port which is only available on
single screen display modes.
10
OUT 2 Multiview button
Multiview display mode switching button for the HDMI OUT 2 port.
▪Short press this button to cycle select:
Single-PIP-PBP(1)-PBP(2)-Triple(1)-Triple(2)-Quad(1)-Quad(2)-single.
▪Long press this button for 3 seconds to switch the aspect ratio
(16:9/Full) for PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1)
/ Quad (2).
11
OUT 2 RES button
Output resolution switching button for the HDMI OUT 2 port.
▪Short press the RES button to cycle switch the output resolution of the HDMI
OUT 2 port (Please refer to the output resolution list of “8. Video & Audio”).
▪Long press the RES button for 3 seconds to switch the output resolution to
720P60.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 7

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
Rear Panel
No.
Name
Function Description
1
L/R OUT 1
PCM 2.0 Analog audio output port.
2
OPTICAL OUT 1
Optical fiber digital audio output port.
3
HDMI OUT 1
Connect to an HDMI display device such as a TV or Monitor with HDMI
cables.
4
L/R OUT 2
PCM 2.0 Analog audio output port.
5
OPTICAL OUT 2
Optical fiber digital audio output port.
6
HDMI OUT 2
Connect to an HDMI display device such as a TV or Monitor with HDMI
cables.
7
HD 1-4
INPUT ports
Connect to an HDMI source device such as Game Console or Set-top box
with HDMI cables.
8
RS-232 port
3-pin phoenix connector, connected to a PC or control system for serial port
upgrade or RS-232 command control.
9
IR EXT port
If the IR signal receiving window of the unit is blocked or the unit is installed
in a closed area out of infrared line of sight, the IR receiver cable can be
inserted to the “IR EXT” port to receive the IR remote signal.
10
DC 12V
DC 12V/2.5A power input port.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 8

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
IR Remote
1. Power button: Press this button to power on the
switcher or set it to standby mode.
2. OUT 1/OUT 2 buttons:
HD 1/2/3/4: Press these buttons to select an input source
on single screen display mode, and the corresponding input
LED on the front panel will illuminate green.
: Press these buttons to cycle select the last or next
input source on single screen display mode.
: Multiview display mode switching button.
▪Short press this button to circularly select: SINGLE - PIP -
PBP(1) - PBP (2) - Triple (1) - Triple (2) - Quad (1) - Quad (2).
16:9 : Press this button to switch the aspect ratio (16:9/Full)
for PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad
(2) display mode.
A-IN: Press this button to pop up the audio channel
selection OSD, then press the UP / DOWN button to select
the audio output channel. (The output audio follows the video source by default.)
Mute: Press this button to mute / unmute the audio.
RES: Output resolution switching button.
●Short press the RES button to cycle switch the output resolution of the HDMI OUT 1
or 2 ports (Please refer to the output resolution list of “Video & Audio”).
●Long press the RES button for 3 seconds to switch the output resolution to 720P60.
3. Out 1: Press this button to enter the OSD menu of the HDMI OUT 1 port and set the
corresponding function by pressing UP/DOWN/LEFT/RIGHT OK button.
Out 2: Press this button to enter the OSD menu of the HDMI OUT 2 port and set the
corresponding function by pressing UP/DOWN/LEFT/RIGHT OK button.
Exit: Press this button to exit the OSD settings layer by layer.
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 9

BZBGEAR BG-UHD-MVS42MA PRODUCT MANUAL
EDID Settings
Users can select following EDID modes via RS-232 commands or OSD menu navigation.
No.
EDID Mode
No.
EDID Mode
1
4K2K60_444, Stereo Audio 2.0
11
1680x1050,Stereo Audio 2.0
2
4K2K60_444, Dolby/DTS 5.1
12
1600x1200,Stereo Audio 2.0
3
4K2K60_444, HD Audio 7.1
13
1440x900,Stereo Audio 2.0
4
4K2K30_444, Stereo Audio 2.0
14
1360x768, Stereo Audio 2.0
5
4K2K30_444, Dolby/DTS 5.1
15
1280x1024,Stereo Audio 2.0
6
4K2K30_444, HD Audio 7.1
16
1024x768, Stereo Audio 2.0
7
1080P, Stereo Audio 2.0
17
720p,Stereo Audio 2.0
8
1080P, Dolby/DTS 5.1
18
AUTO
9
1080P, HD Audio 7.1
19
USER1
10
1920x1200,Stereo Audio 2.0
Video & Audio
The BG-UHD-MVS42MA supports multiple video input resolutions up to 3840x2160@60
and supports multiple audio formats (PCM2.0/5.1/7.1CH, Dolby Digital/Plus/ EX, Dolby True
HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio) pass-through
functionality via HDMI cables.
The unit supports following video output resolutions:
No.
Output Resolution
No.
Output Resolution
1
4096x2160p 60Hz
8
1920x1080p 60Hz
2
4096x2160p 50Hz
9
1920x1080p 50Hz
3
3840x2160p 60Hz
10
1360x768p 60Hz
4
3840x2160p 50Hz
11
1280x800p 60Hz
5
3840x2160p 30Hz
12
1280x720p 60Hz
6
3840x2160p 25Hz
13
1280x720p 50Hz
7
1920x1200p 60Hz RB
14
1024x768 60Hz
Address: 830 National Drive #140, Sacramento, CA 95834, USA ·Tel: [phone] ·Email: [e-mail] 10