BZB Gear HDM-B44H70 User manual

4×4 HDMI 18Gbps Over
HDBaseT Matrix
VER 1.1

Thank you for purchasing this product
For optimum performance and safety, please read these
instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for
future reference.
Surge protection device recommended
This product contains sensitive electrical components
that may be damaged by electrical spikes, surges,
electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to
protect and extend the life of your equipment..
Table of Contents
1. Introduction 3
2. Features 3
3. Package Contents 4
4. Specifications 5
5.Operation Controls and Functions 6
5.1 Front Panel 6
5.2 Rear Panel 7
6. HDBaseT Receiver Panel 9
7.IR Control system (IR Call-back of Matrix and Source Devices)

11
8. Remote control 14
9. Web GUI User Guide 14
10. Application Example 20
Introduction
The 4x4 HDBaseT Matrix supports the transmission of
video (up to 4K2K@60Hz, 18Gbps, HDCP 2.2)
and multi-channel digital audio from 4 HDMI
sources to 3 HDBaseT-Lite outputs and 1
independent HDMI 2.0 output. It supports audio
de-embedding from any one of 4 outputs
(configurable). Any source can be selected it via
on-panel button, IR remote control, RS-232,
LAN or Web GUI..
• Features
•☆HDMI 2.0b, HDCP 2.2 and HDCP 1.4
compliant.
•☆Up to 4K2K@60Hz (4:4:4) on all HDMI and
HDBaseT ports.
•☆Supports pass-through audio up to 7.1 channels
of High Definition audio (LPCM, Dolby TrueHD,
and DTS-HD Master Audio).
•☆Digital and analog audio de-embedding from

any one of 4 outputs (configurable).
•☆HDR and smart EDID management supported.
•☆24V POC on all HDBaseT ports.
•☆Control is via on-panel Button, IR, RS-232,
LAN and Web UI.
•☆Transmission distance: ※Over CAT6 cable
• 70 meters: 1080P @60Hz36bit;
• 40 meters: 1080P @60Hz@48bit;
1080P@120Hz@24bit;
• 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz
(YUV444).
• Package Contents
①1×4×4 HDMI 18Gbps over HDBaseT Matrix
②3×HDBaseT receivers
③2×Mounting Ears (Matrix)
④6×Mounting Ears (Receiver)
⑤4×Phoenix terminals (male)
⑥8×Wideband IR Receiver cables
⑦8×Wideband IR Blaster cables
⑧1×24V/2.7A Locking Power Adaptor
⑨1×IR Remote control
⑩1×User Manual

4. Specifications
Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2 and HDCP 1.4
Video Bandwidth Up to 18Gbps
Video Resolutions
Up to
4K2K@50/60Hz(YUV4:4:4),
4K2K@30Hz, 1080P@120Hz
and 1080P 3D@60Hz
Color Depth 10-bit, 12-bit
Color Space RGB, YCbCr 4:4:4, YCbCr
4:2:2
HDMI Audio Formats
)Pass-through(
LPCM2/5.1/7.1CH, Dolby
Digital, DTS 5.1, Dolby
Digital+, Dolby TrueHD, DTS-
HD Master Audio, Dolby
Atmos, DTS:X
ESD Protection
Human-body Model：
±8kV (Air-gap discharge) ,
±4kV (Contact discharge)
Connections
Transmitter
Input Ports:
4×HDMI Type A (19-pin
female)
6×IR IN (3.5mm Stereo
Mini-jack)
1×RS-232 (Phoenix jack)
1×LAN (RJ45)
Output Ports:
1×HDMI Type A (19-pin
female)
3×HDBaseT (RJ45)
1×SPDIF (Optical)
1×L/R (3.5mm Stereo Mini-
jack)
5×IR OUT (3.5mm Stereo
Mini-jack)
Receiver
Input ports:
1×HDBaseT In [RJ45]
1×IR In [3.5mm Stereo Mini-
jack]
Output ports:
1×HDMI Type A [19-pin
female]
1×IR Out [3.5mm Stereo
Mini-jack]
1×RS-232 [Phoenix
connector]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions
TX: 360mm (W)×160mm
(D)×35mm (H)
RX:
115mm(W)×65mm(D)×17mm(
H)
Weight TX: 1.9kg, RX: 206g
Power Supply DC 24V/2.7A
Power Consumption 35W(max) / 1W（Standby）
Operating
Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90%RH (non-condensing)

Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2 and HDCP 1.4
Video Bandwidth Up to 18Gbps
Video Resolutions
Up to
4K2K@50/60Hz(YUV4:4:4),
4K2K@30Hz, 1080P@120Hz
and 1080P 3D@60Hz
Color Depth 10-bit, 12-bit
Color Space RGB, YCbCr 4:4:4, YCbCr
4:2:2
HDMI Audio Formats
)Pass-through(
LPCM2/5.1/7.1CH, Dolby
Digital, DTS 5.1, Dolby
Digital+, Dolby TrueHD, DTS-
HD Master Audio, Dolby
Atmos, DTS:X
ESD Protection
Human-body Model：
±8kV (Air-gap discharge) ,
±4kV (Contact discharge)
Connections
Transmitter
Input Ports:
4×HDMI Type A (19-pin
female)
6×IR IN (3.5mm Stereo
Mini-jack)
1×RS-232 (Phoenix jack)
1×LAN (RJ45)
Output Ports:
1×HDMI Type A (19-pin
female)
3×HDBaseT (RJ45)
1×SPDIF (Optical)
1×L/R (3.5mm Stereo Mini-
jack)
5×IR OUT (3.5mm Stereo
Mini-jack)
Receiver
Input ports:
1×HDBaseT In [RJ45]
1×IR In [3.5mm Stereo Mini-
jack]
Output ports:
1×HDMI Type A [19-pin
female]
1×IR Out [3.5mm Stereo
Mini-jack]
1×RS-232 [Phoenix
connector]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions
TX: 360mm (W)×160mm
(D)×35mm (H)
RX:
115mm(W)×65mm(D)×17mm(
H)
Weight TX: 1.9kg, RX: 206g
Power Supply DC 24V/2.7A
Power Consumption 35W(max) / 1W（Standby）
Operating
Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90%RH (non-condensing)

Technical
HDMI Compliance HDMI 2.0b
HDCP Compliance HDCP 2.2 and HDCP 1.4
Video Bandwidth Up to 18Gbps
Video Resolutions
Up to
4K2K@50/60Hz(YUV4:4:4),
4K2K@30Hz, 1080P@120Hz
and 1080P 3D@60Hz
Color Depth 10-bit, 12-bit
Color Space RGB, YCbCr 4:4:4, YCbCr
4:2:2
HDMI Audio Formats
)Pass-through(
LPCM2/5.1/7.1CH, Dolby
Digital, DTS 5.1, Dolby
Digital+, Dolby TrueHD, DTS-
HD Master Audio, Dolby
Atmos, DTS:X
ESD Protection
Human-body Model：
±8kV (Air-gap discharge) ,
±4kV (Contact discharge)
Connections
Transmitter
Input Ports:
4×HDMI Type A (19-pin
female)
6×IR IN (3.5mm Stereo
Mini-jack)
1×RS-232 (Phoenix jack)
1×LAN (RJ45)
Output Ports:
1×HDMI Type A (19-pin
female)
3×HDBaseT (RJ45)
1×SPDIF (Optical)
1×L/R (3.5mm Stereo Mini-
jack)
5×IR OUT (3.5mm Stereo
Mini-jack)
Receiver
Input ports:
1×HDBaseT In [RJ45]
1×IR In [3.5mm Stereo Mini-
jack]
Output ports:
1×HDMI Type A [19-pin
female]
1×IR Out [3.5mm Stereo
Mini-jack]
1×RS-232 [Phoenix
connector]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions
TX: 360mm (W)×160mm
(D)×35mm (H)
RX:
115mm(W)×65mm(D)×17mm(
H)
Weight TX: 1.9kg, RX: 206g
Power Supply DC 24V/2.7A
Power Consumption 35W(max) / 1W（Standby）
Operating
Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90%RH (non-condensing)
5.Operation Controls and Functions
5.1 Front Panel
Number Name Function
description
1LED
When device is in
standby mode, the
LED light in red.
LED is blanking
when device is
working normally.
2 Nixie tube
Displaying output
port corresponding
input source.
3 IR IR receive window.
4 POWER button Power on/off button.
5 OUTPUT button A/B/C/D output
channel button.

5.2 Rear Panel
Number Name Function description
1 HDMI INPUT
Connect to the HDMI source
device, such as DVD player or
Set top box.
2OUTPUT HDMI
Connect to the
HDMI display
devices, such
as TVs or
Monitors.
HDBaseT
Connect to
HDBaseT
receiver comes
from the
same package.
Don't connect
to a projector
directly that
built-in
HDBaseT
input port since
24V POC may
destroy this
projector.
3
AUDIO
OUTPUT OPTICAL
Digital audio
de-embedding
output.
L/R
Analog L/R
audio de-
embedding
output.
4 IR EXT
If the front IR sensor of unit is
obstructed or the unit is installed
in a closed area out of infrared
line of sight, the IR receiver
included can be inserted into the
IR EXT port at the rear to extend
the IR sensor range and enable
local of the matrix.
5 IR INPUT IR receiver port, connect an IR
receiver cable.
6 IR OUTPUT IR blaster port, connect an IR
blaster cable.
7CONTROL LAN
Connect to an
active Ethernet
link with an
RJ45
terminated
cable.
RS-232
Connect to an
PC or control
system for
control via a
Phoenix
terminal to
transmit
command.
8 Power port
Plug the 12V DC power supply
into the unit and connect the
adapter to AC wall outlet.

Number Name Function description
1 HDMI INPUT
Connect to the HDMI source
device, such as DVD player or
Set top box.
2OUTPUT HDMI
Connect to the
HDMI display
devices, such
as TVs or
Monitors.
HDBaseT
Connect to
HDBaseT
receiver comes
from the
same package.
Don't connect
to a projector
directly that
built-in
HDBaseT
input port since
24V POC may
destroy this
projector.
3
AUDIO
OUTPUT OPTICAL
Digital audio
de-embedding
output.
L/R
Analog L/R
audio de-
embedding
output.
4 IR EXT
If the front IR sensor of unit is
obstructed or the unit is installed
in a closed area out of infrared
line of sight, the IR receiver
included can be inserted into the
IR EXT port at the rear to extend
the IR sensor range and enable
local of the matrix.
5 IR INPUT IR receiver port, connect an IR
receiver cable.
6 IR OUTPUT IR blaster port, connect an IR
blaster cable.
7CONTROL LAN
Connect to an
active Ethernet
link with an
RJ45
terminated
cable.
RS-232
Connect to an
PC or control
system for
control via a
Phoenix
terminal to
transmit
command.
8 Power port
Plug the 12V DC power supply
into the unit and connect the
adapter to AC wall outlet.
Notice：The following is the EDID schema table.
EDID mode EDID description
1 720p,Stereo Audio 2.0
2 1080p,Stereo Audio 2.0
3 1080p,Dolby/DTS 5.1
4 1080p,HD Audio 7.1
5 1080i,Stereo Audio 2.0
6 1080i,Dolby/DTS 5.1
7 1080i,HD Audio 7.1
8 3D,Stereo Audio 2.0
9 3D,Dolby/DTS 5.1
10 3D,HD Audio 7.1
11 4K2K30_444,Stereo
Audio 2.0
12 4K2K30_444,Dolby/
DTS 5.1
13 4K2K30_444,HD Audio
7.1
14 4K2K60_420,Stereo
Audio 2.0
15 4K2K60_420,Dolby/
DTS 5.1
16 4K2K60_420,HD Audio
7.1
17 4K2K60_444,Stereo
Audio 2.0
18 4K2K60_444,Dolby/
DTS 5.1
19 4K2K60_444,HD Audio
7.1

EDID mode EDID description
1 720p,Stereo Audio 2.0
2 1080p,Stereo Audio 2.0
3 1080p,Dolby/DTS 5.1
4 1080p,HD Audio 7.1
5 1080i,Stereo Audio 2.0
6 1080i,Dolby/DTS 5.1
7 1080i,HD Audio 7.1
8 3D,Stereo Audio 2.0
9 3D,Dolby/DTS 5.1
10 3D,HD Audio 7.1
11 4K2K30_444,Stereo
Audio 2.0
12 4K2K30_444,Dolby/
DTS 5.1
13 4K2K30_444,HD Audio
7.1
14 4K2K60_420,Stereo
Audio 2.0
15 4K2K60_420,Dolby/
DTS 5.1
16 4K2K60_420,HD Audio
7.1
17 4K2K60_444,Stereo
Audio 2.0
18 4K2K60_444,Dolby/
DTS 5.1
19 4K2K60_444,HD Audio
7.1

EDID mode EDID description
1 720p,Stereo Audio 2.0
2 1080p,Stereo Audio 2.0
3 1080p,Dolby/DTS 5.1
4 1080p,HD Audio 7.1
5 1080i,Stereo Audio 2.0
6 1080i,Dolby/DTS 5.1
7 1080i,HD Audio 7.1
8 3D,Stereo Audio 2.0
9 3D,Dolby/DTS 5.1
10 3D,HD Audio 7.1
11 4K2K30_444,Stereo
Audio 2.0
12 4K2K30_444,Dolby/
DTS 5.1
13 4K2K30_444,HD Audio
7.1
14 4K2K60_420,Stereo
Audio 2.0
15 4K2K60_420,Dolby/
DTS 5.1
16 4K2K60_420,HD Audio
7.1
17 4K2K60_444,Stereo
Audio 2.0
18 4K2K60_444,Dolby/
DTS 5.1
19 4K2K60_444,HD Audio
7.1
• HDBaseT Receiver Panel
•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.

•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.

•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.

•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.

•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.

•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.

•
Numbe
r
•Name
•
Functio
n
descript
ion
•1 •P O W E R
•This
LED
will
illumina
tes
when
the
device
is
connect
ed with
power
supply.
•2 •DC 24V
•Plug the
24V DC
power
supply
into the
unit.
•)If the
device
connect
to the
matrix,
the
receiver
doesn't
need
local
power
supply
due to
POC
from the
matrix.(
•3
•
HDBase
T IN
•
Standar
d
HDBase
T signal
input
port.
Connect
to
Matrix
HDBase
T output
with a
UTP
cable.
•4 •H D M I
OUT
•H D M I
output
port.
This slot
is where
you
connect
the
HDTV
or
monitor
with
HDMI
cable.
•5 •IR IN
•Channel
1 IR
Receiver
.
Connect
with
Wideba
nd IR
Rx.
•6 •IR OUT
•Channel
2 IR
Transmi
tter.
Connect
with
•
Wideba
nd IR
Tx.
•7 •RS-232
•Connect
to a PC
or
control
system
with
phoenix
jack for
transmis
sion of
RS-232
comman
ds.
•8
•
Connect
ion
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
Transmi
tter and
Receive
r are in
good
connecti
on
status.
•
※Flashi
ng: The
Transmi
tter and
Receive
r are in
poor
connecti
on
status.
•※Dark:
The
Transmi
tter and
Receive
r are not
connect
ed.
•9
•D a t a
Signal
•
Indicato
r Lamp
•
※Illumi
nate:
The
HDMI
signal
with
HDCP.
•
※Flashi
ng: The
HDMI
signal
without
HDCP.
•※Dark:
No
HDMI
signal.
• 7.IR Control system (IR Call-back of
Matrix and Source Devices)
• The matrix is not only a switcher and extender of
multiple HDMI signals to multiple HDMI receivers
located remotely, it also passes IR control signals

through the IR call-back system to the matrix and
HDMI sources for full, independent control of all
connected inputs from output locations.
•
• Two-way IR Call-back Between matrix, Sources
• and displays from multiple locations.
•
• A key feature on the matrix is discrete IR control of
the matrix, sources and displays from any location –
so inputs at the matrix end can be controlled at a
display location and displays can be controlled at
the matrix location. This is accomplished by placing
a series of IR Emitters on devices to control and IR
Receivers at all locations you wish to control from
to enable the IR signal to travel both ways via the
single Cat5e/6/7 cable.
• IR control is devided into two kind of control ways
as below.
• Insert the 3.5mm IR receiver cable into IR INPUT
ports at the rear of the matrix. At the same time,
insert the 3.5mm IR blaster cable into IR OUTPUT
ports at the rear of the matrix. At the display, the
user connect HDBT Receiver device at the matrix
HDBaseT ports. Afterwards, insert the 3.5mm IR
receiver cable and IR blaster cable to the HDBT
Receiver device.
•①At Matrix end: When the user control the output
device by remote control. The matrix IR INPUT

and the HDBT IR output is match. The way of IR
control is following video switch to change. The
mean is that the HDMI source is switched to the
• HDBT receiver display device output, the IR
control will switch to following output select
corresponding input source.
•②At display end: The matrix has one location
HDMI output and three HDBT outputs. The
location HDMI output has not IR control function.
The three HDBT outputs connect HDBT receiver.
The HDBT IR INPUT and the matrix IR OUPTU is
match. The way of IR control is following video
switch to change. The mean is that the output select
corresponding input source, the IR control will
switch to following output select corresponding
input source.
• Attention: The matrix has one location HDMI
output. If the HDMI input source is switched to the
one location HDMI output, the HDMI output end
has not control the matrix through IR. The function
of the IR “ALL” port is control about one to all
port.
• IR Pin Definition
• IR Receiver and Blaster pin’s definition as below:
• 8. Remote control

• Press this button to open the power of the matrix or
set it as a standby status.
②Press these keys to select the output A, output B, output
C or output D for output
corresponding 1, 2, 3 or 4 input source.
9. Web GUI User Guide
The Matrix can be controlled via Web GUI through LAN port.
You must know current Matrix IP address. The static IP address
is 192.168.1.100. You can connect PC Web GUI through
dynamic IP address. In this unit, you can get the IP address via
PC Controller. Firstly, opening Matrix PC Controller software,
as following page:
Then select the “TCP Control Mode” port, click the “Search”
button. At this moment, you can get current IP address. You can
set the IP address to your PC/laptop/mobile Internet Explorer
and click “Search” to enter Web GUI page.
The Web GUI likes below:
General page