C-Max BRAVO User manual

QUICK START GUIDE

Power-on
Long press the side button for 3 seconds.
Charging
Match up the magnetic charging cable to the
charging ports on the back of the watch.
Downloading &Binding with the APP
1. Scan the QR code below or on the box
or search for it in the app store, to
download and install the Da Fit app to
your smartphone.
Note: your mobile phone must support
Android 5.1 or iOS 8.0 or above, and Bluetooth
4.0 or above.

2. Bind smartwatch with phone/app:
•In settings - Click on "Add Device"
•Select the smartwatch device from the
available list.
•The iOS system will show a Bluetooth
pairing request and you can click on
Bluetooth "Pairing" to confirm. Connect it
directly in the Android system.

Bluetooth call connect
•Android: After connect APP successfully,
mobile phone will pop up "Bluetooth
pairing request" automatically, allow
access to mobile phone contacts and call
history. it is no need to set under menu of
mobile phone. You can make call and
answer call on watch after pair.
•iPhone: Enter into Settings – Bluetooth,
search device and connect pair (Audio
_Y20GT). After pair successfully, you can
make call/ answer incoming call.

Remove Device
For the Android mobile phone, the device can be
disconnected from your mobile phone by simply
clicking on "Remove Device".
iPhone: firstly, users need dismiss pair, then
enter into mobile phone Setting – Bluetooth,
find Audio _Y20GT, click icon on the right, ignore
device, watch and mobile phone are
disconnection.

Device Maintenance
Please follow these tips to maintain your
smartwatch in optimum performance.
•Wipe clean regularly, especially the
sensors on the back of the watch and keep
it dry.
•Wear the watch with enough give in the
band to allow circulation between your
wrist and the back of the watch.
•The device is sweat-proof and splash-
proof but should not be immersed in
water.
•Avoid using and storing the device in
places of high temperature and high
humidity.
•Avoid excessive skin care products to the
wrist where the watch is worn.
----
Health
Monitoring
Sensors
Charging
Ports
----

Frequently Asked Questions (FAQs)
Why does the watch disconnect Bluetooth when
the Android screen goes out?
•Lock the background APP. When the Da Fit
APP is closed, the watch can disconnect
from the mobile phone.
•Set APP to self-startup.
•Unrestricted background operation. By
default, Android devices restrict the
background operation so the APP has to
be set manually without any restriction.
Why is the watch not receiving message
notification?
•In the phoe APP, confirm the receive push
notifications is enabled for messages.
•Confirm that messages can be displayed
normally in the mobile phone notification
bar. The watch will not receive notifications
if the paired phone is not receiving them.
Locate notification settings in the mobile
phone settings and ensure they are
selected for each corresponding
communication APP you use.
Why is hot water destructive to the watch?
The high temperature of the water generates
excess vapor which is in the gas phase the small
molecular radius can easily infiltrate the small
gaps in the shell of the watch body. Then when
the temperature drops again, the vapor
condensates into liquid-phase droplets which will
cause ashort circuit inside the watch.

Warnings:
This watch does NOT replace any medical device
and is not advertised as such. Official medical
equipment used by trained personnel should be
used in the process of diagnosis and treatment.
The only medically accurate and validated way
to measure blood pressure is by stopping the
blood flow by inflating a BP cuff around your
upper arm, then deflating it while listening for
changes in your arteries.
Please consult a physician with any blood
pressure issues and confirm readings with a
certified medical device.
In case of allergic reaction or discomfort while
wearing the watch, immediately discontinue
wearing it and consult a physician accordingly.