C4i IR D3 User manual

IR D3 User Manual
Front side View :
Back side View :
Top View :

⑴- Remote sensor
⑵⑸- Driver unit
⑶- Front inverted hole
⑷- TFT Color display
⑹- USB port
⑺- Power ON/OFF switch : Move ON/OFF switch to ON/OFF side to power on/off the device.
⑻- Antenna
⑼- Power indicator
⑽- Power input port
⑾- AUX in port
⑿- Mode button
⒀- Standby Button : Short press to enter to enter or exit standby mode.
⒁- VOLUME knob / MUTE button : Turn it to adjust the volume; Press it to mute the sound.
⒂- MENU Button : Short press to enter Main menu ;
When the main menu interface, long press it to switch between black and white screen / color screen ;
Under “Internet radio / USB/ UPnp / local radio ”mode, long press to enter WPS network pairing.
⒃- Go left / Return
⒆- Go right / Enter
⒄- PRESET button: Short press PRESET button to go favorite list. Long press PRESET button to preset the favorite list.
⒅-SKIP knob / ENTER button : Turn the knob to go up/down or previous/next; Press it for ENTER button to enter submenu or to
confirm setting.
Power Supply:
Use suppliedAC adaptor (12V/3A) to connect the device IR D3 with electrical socket to supply power.
Power ON/OFF
Move the Power switch to ON/OFF side to power on/off the device.
First time to power on the device, please turn the Skip knob to select system language, and press Enter button to
confirm.
WIFI Connection
A-- First time to connect Wifi
1, When the device is powered on, select language and press ENTER button to confirm.
--When it comes to “Enable ’Check Network when Power on’”. Turn SKIP knob( or press ◀▶ ) and
select ”YES”. Then press ENTER button ,
--It will shows “Would you like to configure Network now ?”on display. Select “Yes”and press ENTER button
to scan for available networks. Turn SKIP knob to select available WIFI name and press ENTER button to
enter the password input interface.
2, How to input the password :

Turn the SKIP knob to look up the letters/special characters/numbers, press ▶button to confirm and go to
next word input. when input the last password, please press ENTER button to confirm.
3, Once Wifi connection is successful , it will enter into Main Menu.
B -- Change Wifi Connection / Or re-connect Wifi
1, Press MENU button to enter “Main menu”, turn SKIP knob to select “configuration”and press ENTER button
to enter submenu.
2, Turn SKIP knob to select “Network”and press ENTER button to enter “Network”submenu, enter“Wireless
Network configuration”→“Enable”, press ENTER button to start available networks scanning.
3, Select your available WIFI name and input the passwords.
Internet Radio
1，When Wifi connection is successful, press MODE button to switch to “Internet Radio”mode, and press
ENTER button to enter internet radio submenu →“Radio Station/Music”submenu, turn SKIP knob to select
and enjoy the available radio on the internet.
2, Short press ▶button to zoom out the pictures. Short press ◀button to return.
3, Long press “PRESET”button to preset current radio station to your favorite list, turn SKIP knob to set the
station list number you want and press ENTER button to confirm。
4, Short press “PRESET”button to go to your favorite internet radio station list.
FM Radio
1, Press MODE button to switch to FM mode, and press ENTER button to play FM radios.
2, Long press ◀▶button 2~3 seconds to go previous/next available channels.
3, Short press ◀▶(or Turn SKIP knob) to adjust radio frequency 0.05MHz each time.
4, Long press “PRESET”button to preset current radio channel to your favorite list, turn SKIP button to set the
radio channel list number you want and press ENTER button to confirm。
5, Short press “PRESET”button to go to your favorite FM radio channel list.
DAB/DAB+ Radio
1, Press MODE button to switch to DAB mode, and press ENTER button to start automatic searching.
2, The available DAB/DAB+ radio stations will be stored after automatic searching. Press “PRESET”button to go
to the stored DAB radio stations list ; Turn SKIP knob to select radio stations , press ENTER button to play.
3, Long press “PRESET”button to preset current DAB/DAB+ radio station to your favorite list, turn SKIP knob to
set the DAB/DAB+ radio channel list number you want and press ENTER button to confirm。
4, Short press ▶button to zoom out the pictures. Short press ◀button to return.
Bluetooth music play
1, Press MODE button to switch to Bluetooth mode, and press ENTER button to enter.
2, Use your Bluetooth enabled device (such as iPhone /iPad...), turn on the Bluetooth function, and search for “IR D3”
and click it to connect.

3, Once connect successfully, it will show “Bluetooth Connected”on display.
4, Short Press ENTER button to play or pause the music. Turn the SKIP knob to go previous or next songs.
5, Long press ENTER button to disconnect Bluetooth, Long press ENTER button again to reconnect Bluetooth.
6, The device will search associated picture on internet for the song which is playing. Short press ▶button to zoom out the
picture.
USB music play
1, Insert USB flash drive, it will show USB connect symbol on top right side of display.
2, Press MODE button to switch to USB mode, and press ENTER button to play songs from the USB flash drive .
3, Turn SKIP knob to select the songs from USB and press ENTER button to play.
4, Press ▶button to select if delete the song. Press ◀button, back to superior menu.
5, Short Press ENTER button to play or pause the music.
AUX music play
1, Connect the device and your smart phone or MP3 player via 3.5mm Aux cable.
2, Press MODE button to switch to AUX mode, and press ENTER button to enterAUX mode.
3, Play music from your smart phone or M3 player via the device IRD3.
Date&Time Setting
A- Under WIFI connection, the device will automatically synchronize the local time.
B- Manual clock setting :
1, Press MENU button to enter Main menu ,then turn SKIP knob ( or press ◀▶) to select “configuration” and
press ENTER button.
2, Turn SKIP knob to select “Date&Time”, then press ENTER button and turn SKIP knob to select “Set Date and
Time”. Press ENTER button→select “Manual Setup”and press ENTER button→Enter into “Set Date and
Time”interface.
3, Turn SKIP knob to adjust the numbers , Press ▶button to confirm and go to month/year/minutes/hours setting.
Then Press ENTER button to confirm Date&Time setting.
4, Press MENU button to return Main menu.
Alarm clock Setting
This device can set 2 sets of alarms, operation as below:
1, Press MENU button to enter Main menu , then turn SKIP knob ( or press ◀▶) to select “configuration” and
press ENTER button.
2, Turn SKIP knob to select “Alarm”, then press ENTER button to enterAlarm setting.
3, Turn SKIP knob to select Alarm 1 / Alarm 2 / NAPAlarm / Alarm Volume.
For Alarm 1 / Alarm 2, you can set different Repeat days and different Alarm sound.
Enter Repeat submenu : Everyday/Once/Mon/Tue/Wed/Thu/Fri/Sat/Sun
Enter Sound submenu : Beep/Melody/Internet Radio/FM/DAB/DAB+/USB
Enter Time submenu : Turn SKIP knob to set how long does the alarm clock go off.

Enter Alarm volume submenu : Press ◀▶button to adjust the alarm volume.
4, Press ENTER button to confirm Alarm setting , and press MENU button to return Main menu.
5, When the alarm clock rings, press any other button (except Standby button ) to activate snooze function. After 5
min, the alarm clock will go off again.
6, Press Standby button to shut down the Alarm clock.
Sleep Timer Setting
1, Press MENU button to enter Main menu ,then turn SKIP knob ( or press ◀▶) to select “configuration” and
press ENTER button.
2, Turn SKIP knob to select “Sleep Timer” and press ENTER button to enter Sleep timer setting.
3, Turn SKIP knob to select 15Minutes/30Minutes/60Minutes/90Minutes/120Minutes/150Minutes/180Minutes and
press ENTER button to confirm. The device will be automatically turn off after 15Minutes/30Minutes/60Minutes
/90Minutes/120Minutes/150Minutes/180Minutes
(If select “Turn Off” and press ENTER button, the device will be turned off , and enter into standby)
4, Press ENTER button to confirm, then press MENU button to return Main menu.
Technical Specifications :
Output power :
RMS 13W x 2
S/N ratio :
≥70dBA
Distortion :
≤1%
Frequency Response :
120Hz～18KHz
Driver unit :
Φ66mm / 4Ω
Power supply :
AC adaptor 12V/3A
Compatible with :
UPnP multimedia server
Working Temperature :
0℃～50℃
Unit size :
320mm（W）* 100mm（H）* 108mm（D）
Packing List:
1x Internet Radio Speaker IR D3
1x AC adaptor
1x 3.5mm Aux cable
1x User Manual