CAB EOS4 Instruction sheet

Conguration Manual
Label Printer
EOS

2 2
Conguration Manual
for the following products
Family Type
EOS EOS1
EOS4
Edition: 06/2013 - Part No. 9009272
Copyright
This documentation as well as translation hereof are property of cab Produkttechnik GmbH & Co. KG.
The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original
intended purpose demand the previous written authorisation by cab.
Trademark
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
TrueTypeTM is a registered trademark of Apple Computer, Inc.
ZPLTM is a registered trademark of Zebra Technologies Inc.
Editor
Regarding questions or comments please contact cab Produkttechnik GmbH & Co. KG.
Topicality
Due to the constant further development of our products discrepancies between documentation and product can occur.
Please check www.cab.de for the latest update.
Terms and conditions
Deliveries and performances are effected under the “General conditions of sale of cab”.
Germany
cab Produkttechnik
GmbH & Co KG
Postfach 1904
D-76007 Karlsruhe
Wilhelm-Schickard-Str. 14
D-76131 Karlsruhe
Telefon [phone]
Telefax [phone]
www.cab.de
[email protected]
France
cab technologies s.a.r.l.
F-67350 Niedermodern
Téléphone [phone]
www.cab.de/fr
[email protected]
USA
cab Technology Inc.
Tyngsboro MA, 01879
Phone [phone]
www.cab.de/us
[email protected]
South Africa
cab Technology (Pty.) Ltd.
2125 Randburg
Phone [phone]
www.cab.de/za
[email protected]
Asia
cab Technology Co., Ltd.
Junghe, Taipei, Taiwan
Phone [phone]
www.cab.de/tw
[email protected]
China
cab (Shanghai)Trading Co., Ltd.
Phone [phone]
www.cab.de/cn
[email protected]
Representatives in other countries on request

2
3
Table of Contents
1 Introduction ............................................................................................................................................ 4
2 Connecting Label Printer to Computer ................................................................................................ 5
2.1 Connecting Label Printer via Ethernet Interface ...................................................................................... 5
2.2 Connecting Label Printer via USB Interface ............................................................................................. 6
2.3 Connecting Label Printer via Optional RS-232 Interface ......................................................................... 6
2.4 Setting Up a WLAN Connection ............................................................................................................... 7
2.5 Setting Up a Bluetooth Connection .......................................................................................................... 7
3 Ofine Menu ........................................................................................................................................... 8
3.1 Structure of the Ofine Menu ................................................................................................................... 8
3.2 Navigating in the Ofine Menu ................................................................................................................. 9
3.3 Service Key ............................................................................................................................................ 10
4 Conguration ........................................................................................................................................ 11
4.1 Conguration via Control Panel ..............................................................................................................11
4.2 Conguration via the Web Interface ....................................................................................................... 18
5 Test Functions ...................................................................................................................................... 26
5.1 Overview ................................................................................................................................................ 26
5.2 Short Status ........................................................................................................................................... 26
5.3 Status Print ............................................................................................................................................. 27
5.4 Font List ................................................................................................................................................. 29
5.5 Device List .............................................................................................................................................. 30
5.6 WiFi Status ............................................................................................................................................. 31
5.7 ASCII Dump Mode ................................................................................................................................. 32
5.8 Label Prole ........................................................................................................................................... 33
5.9 Event Log ............................................................................................................................................... 34
6 Service Functions ................................................................................................................................ 35
6.1 Firmware Update from Storage Device .................................................................................................. 35
6.2 Load Settings ......................................................................................................................................... 35
6.3 Save Settings ......................................................................................................................................... 36
6.4 Default Settings ...................................................................................................................................... 36
6.5 Reset Service Counter ........................................................................................................................... 37
6.6 Reset Passwords ................................................................................................................................... 37
6.7 Save Log les ......................................................................................................................................... 38
6.8 Printer Model .......................................................................................................................................... 38
7 Pay-per-Print ......................................................................................................................................... 39
7.1 Short status PPP .................................................................................................................................... 39
7.2 Load PPP Voucher ................................................................................................................................. 39
8 FTP Printer Management ..................................................................................................................... 40
8.1 FTP Logon ............................................................................................................................................. 40
8.2 FTP Printing ........................................................................................................................................... 40
8.3 FTP Access to Storage Devices ............................................................................................................. 40
8.4 FTP Firmware Update ............................................................................................................................ 41
9 Storage Devices ................................................................................................................................... 42
9.1 Suitable Storage Devices ....................................................................................................................... 42
9.2 Installation .............................................................................................................................................. 42
9.3 Directory Structure ................................................................................................................................. 42
9.4 Writing .................................................................................................................................................... 43
9.5 Storage Device Functions in the Ofine Menu ....................................................................................... 43
10 External Keyboard ............................................................................................................................... 45
10.1 Connecting External Keyboard .............................................................................................................. 45
10.2 Keyboard Assignment ............................................................................................................................ 45
10.3 Special Key Functions ............................................................................................................................ 46
11 cabFirmwareUpdater ........................................................................................................................... 47
12 Index ...................................................................................................................................................... 48

4 4
Important information and instructions in this documentation are designated as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger to your health or life.
!
Warning!
Indicates a hazardous situation that could lead to injuries or material damage.
!
Attention!
Draws attention to possible dangers, material damage or loss of quality.
iNotice!
Gives you tips. They make a working sequence easier or draw attention to important working processes.



Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special ttings).
Time Information in the display.
1 Introduction

4
5
2 Connecting Label Printer to Computer
Choose from the following options for connecting a computer to the label printer:
• Direct connection to the Ethernet interface (4)  ”2.1” on page 5.
• Connection via a computer network to the Ethernet interface (4)  ”2.1” on page 5.
• Direct connection to the full-speed USB slave interface (3)  ”2.2” on page 6.
• Connection via optional RS-232 interface adapter connected to an USB master interface (2).
• Connection to a wireless network via optional WLAN adapter connected to an USB master interface (2).
• Connection via optional Bluetooth adapter connected to an USB master interface (2).
2
3
4
5
1
2 2
1 Power switch
2 USB master interfaces for
keyboard, scanner, memory stick
or service key
3 USB full-speed slave interface
4 Ethernet 10/100 Base-T
5 Power connection jack
Fig. 1 Connections
2.1 Connecting Label Printer via Ethernet Interface
To connect the label printer to a network jack, a patch cable with an RJ45 plug for 10 Base T or 100 Base T is
required. For direct connection of the printer to the Ethernet card of a local computer, use an appropriate crossover
cable.
!
Attention!
Use a shielded cable to connect the printer to the network.
1. Connect computer and label printer with a suitable cable.
2. Make basic settings for operation of the Ethernet interface  ”4.1.4” on page 16.
3. Call up the printer web interface  ”4.2.1” on page 18.
4. Open the "Setup" tab on the printer web interface.
5. Set the parameters described in  Tab "Setup" on page 20 in the path Setup > Interfaces > Network.
iNotice!
For changing parameter settings user name and password must be entered  page 21.
User name : admin
Password (Default) : admin
6. Set up print service if necessary  ”2.1.1” on page 6.
7. Adjust Windows printer setting  ”2.1.2” on page 6.
!
Attention!
Do not change the settings of the "IP" and "Gateway" on the printer web interface, as otherwise the
connection to the printer may be lost.

6 6
2 Connecting Label Printer to Computer
2.1.1 Print Services Raw-IP and LPR/LPD in MS Windows
Install a standard TCP/IP port as additional port for printing.
During installation of the new port choose between "Raw" and "LPR"
Raw-IP: Enter the same port address in the printer which you have selected during installation.
LPD: "lp" (line printer) must be entered as the name of the printer on the computer (queue name).
2.1.2 Adjusting Windows Printer Setting
When the printer driver valid for your Windows version is installed on your computer, Windows standard applications
can be used to edit the label contents and to start the print jobs. To use the Raw-IP or LPR/LPD print services, the
Windows printer settings must be adjusted:
1. Open the folder containing the printers via Start > Settings > Printers.
2. Right-click the icon of the label printer.
A pop-up menu appears.
3. Select "Properties" in the pop-up menu.
4. Open the "Details" or "Connections" tab.
This tab contains, among other things, the connections which were also set up when the print services were
installed. The names of these connections depend on the installation tool used.
5. Select the Raw-IP or LPR connection.
6. Click OK.
2.2 Connecting Label Printer via USB Interface
The full-speed USB interface allows the label printer to be operated via a USB interface of a computer running the
operating system Windows XP 32bit / 64bit, Windows Server 2003 32bit / 64bit, Windows Vista 32bit / 64bit, Windows
Server 2008 32bit / 64bit, Windows Server 2008 R2 64 bit, Windows 7 32bit / 64bit and Windows 8 32bit / 64bit.
A printer driver must be installed if an USB interface will be used for connection. The printer driver for your unit is
found on the Printer DVD which is included in the scope of delivery or on the internet.
1. Switch label printer off.
2. Connect computer and label printer with an A-B cable.
3. Switch computer on.
4. Place the Printer DVD in the DVD drive.
5. Exit all programs currently running.
6. Switch printer on.
The Windows Installation Wizard is started automatically.
Follow the on-screen instructions. The source of the installation le is
"D:\windrv\win32\" for Windows XP 32bit / Windows Server 2003 32bit / Windows Vista 32bit /
Windows Server 2008 32bit / Windows 7 32bit / Windows 8 32bit or
"D:\windrv\win64\" for Windows XP 64bit / Windows Server 2003 64bit / Windows Vista 64bit /
Windows Server 2008 64 bit / Windows Server 2008 R2 64 bit / Windows 7 64bit /
Windows 8 64bit
where D is the letter of the DVD drive used.
After successful installation, an icon for the label printer appears in the Windows "Printer" system folder.
7. Click icon in "Printer" system folder and make printer settings if necessary.
2.3 Connecting Label Printer via Optional RS-232 Interface
An optional RS-232 interface adapter is available for the printer. The interface must be connected to an USB master
interface of the printer.
iNotice!
For detailed information see the Operating Instructions of the optional interface.

6
7
2.4 Setting Up a WLAN Connection
To set up a WLAN connection a WLAN USB Adapter (Part No. 5906225 ) is required.
1. Connect the WLAN USB adapter to an USB master interface.
2. Start the Ofine menu.
3. Select Setup > Interfaces > Network > WLAN.
4. Set DHCP or IP and Mask and if necessary Gateway for WLAN operation  ”4.1.4” on page 16.
5. Select Access-Point.
6. Select Scan.
The display shows the available Access-Points.
7. Select the Access-Point to be used and conrm the selection with .
8. If the network is protected a prompt to enter the passkey appears in the printer display. Enter the passkey and
select .
9. If the IP address is assigned by DHCP, identify the IP in the Short status  ”5.2” on page 26.
10. Call up the printer web interface  ”4.2.1” on page 18.
11. Open the "Setup" tab on the printer web interface.
12. Set the parameters described in  Tab "Setup" on page 20 in the path Setup > Interfaces > Network.
iNotice!
For changing parameter settings user name and password must be entered  page 21.
User name : admin
Password (Default) : admin
13. Set up print service if necessary  ”2.1.1” on page 6.
14. Adjust Windows printer setting  ”2.1.2” on page 6.
!
Attention!
Do not change the settings of the "IP" and "Gateway" on the printer web interface, as otherwise the
connection to the printer may be lost.
2.5 Setting Up a Bluetooth Connection
To set up a Bluetooth connection a Bluetooth USB Adapter (Part No. 5906226 ) is required.
i
Notice!
A Bluetooth software is delivered with the Bluetooth USB Adapter.
1. Connect the Bluetooth USB adapter an to an USB master interface.
2. Switch on the printer.
3. Install the Bluetooth software on the computer.
4. Start the Bluetooth software.
5. Start "Search devices".
The printer will be shown in a list of Bluetooth devices.
6. Optional : For an well-dened connection of the devices select the printer and click "Connect Devices".
Either a passkey will be shown or a window will be opened where a passkey can be set.  Set a passkey if
necessary .
The display of the printer shows a prompt to enter the passkey too.  Enter the passkey.
7. Select in the software "Connecting" via "Serial Bluetooth Interface".
The new interface, e.g COM5, will be shown
8. Install the current printer with connection via the new COM interface in the label software or in Windows.
2 Connecting Label Printer to Computer

8 8
3 Ofine Menu
3.1 Structure of the Ofine Menu
The ofine menu contains setting options on several levels for conguring the label printer. In addition, the ofine
menu features test functions for supporting the conguration or checking the function of the label printer. Using status
functions, the set parameters can be displayed or printed.
1st menu level 2nd menu level Access
Storage device Load label ¾Only with storage device dened as
Default storage
Print directory
Format ¾Only with storage device dened as
Default storage
PIN protection possible
Print le content ¾Only with storage device dened as
Default storage
Short status
Test Status print
Font list
Device list
WiFi status ¾Only with WLAN USB adapter installed
ASCII Dump Mode
Label prole
Event log Only with service key inserted
Setup Local settings PIN protection possible
Machine param.
Print param.
Interfaces
Status line
Security
Service Firmware fr.
storage device
¾Only with storage device dened as
Default storage
PIN protection possible
Load settings ¾Only with storage device dened as
Default storage
Save settings ¾Only with storage device dened as
Default storage
Reset service ctr. Only with service key inserted
Reset passwords Only with service key inserted
Save log les ¾Only with USB memory dened as
Default storage
Printer model Only with service key inserted
€
€
€
PPP Short status PPP
€
€
€
Load PPP voucher ¾Only with USB memory dened as
Default storage
Table 1 Menu structure

8
9
3 Ofine Menu
3.2 Navigating in the Ofine Menu
Select in the start display to start the Ofine menu.
Return from
a submenu
Leaving the
Offline menu
Menu title
Jump into
a submenu
Start of the
Offline menu
Status line
Fig. 2 Navigating in the Ofine Menu
Cancel
setting
Confirm
setting
Fig. 3 Examples of parameter setting
iNotice!
All settings in the ofine menu also can be made via the Ethernet interface ( page 20) or via direct control
commands ( “Programming Manual“).
iNotice!
A longer touching (>500 ms) of several widgets can cause the following actions :
Clock Jump to the setting Time
Date Sheet Jump to the setting Date
Cutter Jump into the submenu Cutter
Ethernet status Jump into the submenu Ethernet
WLAN Jump into the submenu WLAN
Table 2 Actions released by widget touching

10 10
3 Ofine Menu
3.3 Service Key
A service key is required for accessing special service functions not accessible to the operator. This key switches the
printer to service mode and enables:
• Access to additional conguration parameters
• Resetting of the service counter
• Resetting of passwords
• Additional information in the status print and in the device list
• Printout of an event list
• Changing of the device name
• Saving and loading of conguration settings
• Access to PIN-protected conguration parameters and functions without entering the PIN
• Access to conguration parameters for optional assemblies, even if they are not currently installed
!
Attention!
Incorrect settings and data loss via unauthorized access.
Access protection is deactivated when the service key is inserted. Operation of the printer by unauthorized
persons can lead to incorrect settings and data loss in this case.
Provide the service key to authorized persons only.
Remove service key after service work and store it in a secure location.
Fig. 4 Inserting the service key
Insert service key into a USB master interface of the printer.
The service key also can be inserted while the device is switched on.
i
Notice!
In this document, parameters and functions which are only accessible when the service key is inserted are
indicated using the following note:
Access only with service key inserted!

10
11
4.1 Conguration via Control Panel
A host of parameters for conguring the printer are found in the Setup menu of the ofine menu.
Congure the printer via the control panel during initial commissioning and when making major changes to the
operational conditions.
For changes required for processing different print jobs use software settings.
i
Notice!
The Setup menu can be protected from unauthorized access via a code number (PIN).
4.1.1 Local Settings
Start Ofine menu.
Select Setup > Local settings.
Parameter Meaning Default
Language Setting the display language English
Country Setting the country-specic date and time formats.
The time formats can also be overwritten via software. The
changes are not saved permanently, however.
Germany
Timezone Adaptation of the time display of the printer to the time zone in
relation to UTC (Universal Time Coordinated).
UTC+1
Daylight saving Selection of the daylight saving regulation applicable for the
region. The time is then changed automatically.
EU
Date Setting of the system date in the format DD.MM.YYYY.
The print output of the date occurs in the format set via the
Country parameter.
The date can also be changed via software. The change is not
saved permanently, however.
-
Time Setting the system time in the HH:MM:SS format. When
changing the time, ensure that the Timezone, Daylight
saving and Date parameters are set correctly.
The time can also be synchronized automatically via the internet
using the Ethernet interface. The print output of the time occurs
in the format set via the Country parameter.
The time can also be changed via software. The change is not
saved permanently, however.
-
Keyboard Setting of the keyboard layout when using an external
keyboard.
If keyboard is not connected, access only with service
key inserted!
Automatic
(=Setting
Country)
Table 3 Parameters of the menu Setup > Local settings
4 Conguration

12 12
4 Conguration
4.1.2 Machine Parameters
Start Ofine menu.
Select Setup > Machine param..
Parameter Meaning Default
Printhead pos. X Shifting of the entire print image perpendicular to the direction of
paper ow.
The absolute shifting is limited by the margins of the print zone.
Those are determined by the width of the printing line on the
printhead. The Printhead pos. X can also be set via software.
The offset values from the Machine param. menu and the
software are added together.
0,0 mm
Printhead pos. Y Shifting of the entire print image in the direction of paper ow. With
positive values, printing begins later in the direction of paper ow.
Shifting of the print image in the direction of paper ow also inu-
ences the cut position.
Correct the Cut position parameters by the same value in the
opposite direction.
The Printhead pos. Y can also be set via software. The offset
values from the Machine param. menu and the software are
added together.
0,0 mm
Tear-off pos. Shifting of the tear-off position in the direction of paper ow. With
positive values, the label strip is transported farther out of the printer.
0,0 mm
Demand sensor Conguration of the peel-off parameters for devices with dispenser module.
If dispenser module is not installed, access only with service key
inserted
> Peel position Offset of the peel position relative to the rear label edge.
The Peel position can also be set via software. The offset values
from the Machine param. menu and the software are added
together.
0,0 mm
> Backfeed delay Delay time between removing the label from the peel position and
the backfeed of the label.
250 ms
> Liner tension Setting of the peel-off tension
Access only with service key inserted
0%
Cutter Conguration of the cut parameters for devices with cutter.
If cutter is not installed, access only with service key inserted
> Cut position Offset of the cut position relative to the rear label edge.
The Cut position can also be set via software. The offset values
from the Machine param. menu and the software are added
together.
0,0 mm
> Cutting depth with perforation cutter only
Setting of the perforation depth.
The Cutting depth can also be set via software. The offset values
from the Machine param. menu and the software are added
together.
0
Backfeed
position
Offset of the backfeed movement 1,0 mm
Brightn. LCD Brightness of the LCD display from 1 to 8. 8
Contrast LCD Contrast of the LCD display from 0 to 15. 6
Volume Speaker Volume of the speaker : Mute, 1 or 2. 1
Time Powersave Time between the last operation and activation of energy-saving
mode.
5 min

12
13
4 Conguration
Parameter Meaning Default
Cleaning
interval
Setting of intervals for printhead cleaning in increments of 100 m
media passage.
If the set length of the medium (label strip, transfer ribbon) has
passed the printhead and an error occurs in the ow of the medium
(e.g. label end, transfer ribbon end), the Clean printhead!
message appears in the display.
The error message for the error which occurred is not displayed until
the Clean printhead! message is acknowledged. As long as no
errors occur in the medium ow, no messages are displayed and the
print job is continued even if the cleaning interval has passed.
1000 m
Debug mode Operating mode which supports the rmware programmer when
localizing errors.
Off
Table 4 Parameters of the menu Setup > Machine param.

14 14
4 Conguration
4.1.3 Print Parameters
Start Ofine menu.
Select Setup > Print param..
Parameter Meaning Default
Heat level The Heat level setting only affects the test printouts and print
jobs without heat level denition in the software.
Otherwise the heat level dened in the software is used.
0
Print speed Basic print speed setting.
The print speed can be re-specied for each print job via software.
The basic setting is not changed by this.
The print speed setting also affects the test printouts.
50 mm/s
Transfer print On for thermal transfer printing: Sensor for monitoring the transfer
ribbon is activated.
Off for thermal direct printing: Sensor for monitoring the transfer
ribbon is not activated.
The setting can be overwritten for each print job via software. The
basic setting is not changed by this.
On
Warn level
ribbon
Warning via the Ethernet interface by way of an SNMP message or
e-mail sent when the remaining diameter of the ribbon supply roll
undershoots the set value (32–74 mm).
Off
Label sensor Method for detecting the starting end of the label.
Gap Sensor: Detection using changes in the transparency
between the label and label gap.
Bottom-Reect: Detection using reex marks on the bottom of
the medium.
Gap
Sensor
Extrapolate pos. The positions of the labels which are between the label sensor and
the printhead are calculated from the rst label recognized by the
sensor and the programmed label distance. That way those labels
can be printed.
off
Tear-off mode Positioning the label medium for tearing off at the tear-off plate.
On: Additional advancement of the label medium which positions
the label gap after the last printed label at the dispense plate.
Off: Label advance stops once the last label has fully passed the
print line.
On
Backfeed Method for backfeeding the label medium.
Backfeeding is necessary in the cutting mode since the front edge
of the next label has passed the print line when cutting a label.
always: Backfeeding occurs independently of label contents.
smart: Backfeeding only occurs when the next label is not yet fully
prepared cutting the current label. Otherwise, the printing of the
next label is started, interrupted and completed after cutting of the
rst label without backfeeding.
smart
Single-Print
mode
Peel-off mode : Behavior after removing a label from the peel
position
On: The next label will be printed and peeled-off after touching
Off: The next label will be printed and peeled-off immediately
Off
Cut mode : Behavior between the cuts
On: After cutting the next label will be printed and cut after touching
Off: All labels will be printed and cut nonstop
If dispenser module or cutter are not installed, access
only with service key inserted

14
15
4 Conguration
Parameter Meaning Default
Error-Reprint On: With a correctable error and corresponding troubleshooting,
the label being printed when the error occurs is repeated.
Off: Print job is continued with the next label.
On
Reprint option Printing of another label with the information of the previous print
job by touching . This function can be executed until the print
buffer is cleared with .
On
Protocol error On: Printer switches to Error mode when unknown or faulty data is
received.
Off: When working with older computer operating systems, it is
possible that the print spooler of the operating system will reply to
the printer with normal status messages of the printer (e.g. end of
paper) in the form of ASCII text. The printer cannot interpret this
data and outputs a large number of protocol errors. In this case, it is
advantageous to set the Protocol error parameter to Off.
!
Attention!
If the Protocol error parameter is set to Off,
protocol errors which can be traced back to faulty
programming are also ignored. There is a risk of data
loss.
Access only with service key inserted!
On
Barcode error On: With faulty barcode contents or size specications, printing is
interrupted.
Off: Printing is not interrupted if an error occurs. If barcode
contents are faulty, the printer attempts to replace the incorrect data
with valid characters (e.g. zeros). If barcode size specications are
faulty, a gray area is printed instead of the barcode.
On
Width ASCII dump Width of the printing area in the ASCII Dump test function
 ”5.7” on page 32.
With the Automatic setting, the printout of the control sequences
arriving at the printer occurs over the maximum printing width. The
printing area width can be reduced down to 50 mm.
Automatic
ZPL Setting of the label parameters for ZPL data.
Access only when at least one interface is set to operate ZPL data..
> Printing width Setting the print width 100,0 mm
> Label length Setting the label length 150,0 mm
Table 5 Parameters of the menu Setup > Print param.

16 16
4 Conguration
4.1.4 Interfaces
Start Ofine menu.
Select Setup > Interfaces.
Parameter Meaning Default
Network Conguration parameters of the network interfaces
Additional conguration parameters for the network interfaces can be accessed via
the web interface  ”Setup Tab” on page 20.
> Ethernet Conguration of the Ethernet interface
>> DHCP Method of issuing IP address
On: Dynamic issuing of IP address by the DHCP server
Off: Direct issuing of the IP address by the operator
On
>> IP IP address of the label printer. Only valid with DHCP = Off. -
>> Mask Subnet mask (classication and address range) of the local network.
Only valid with DHCP = Off.
-
>> Gateway Connection address between the local network and other networks.
The IP address of the connecting computer (router) on the network is
used for this. The address of the router can also be issued via DHCP.
Off
> WLAN Conguration of the optional WLAN interface
* Conguration only with WLAN interface connected
>> Access-Point Selection of the Access Point to setting up the WLAN connection. -
>> DHCP  Ethernet > DHCP On
>> IP  Ethernet > IP -
>> Mask  Ethernet > Mask -
>> Gateway  Ethernet > Gateway On
> Network error Printer switches to Error mode when problems with the network
connection occur.
Off
RS-232 Conguration of the optional RS-232 interface
If interface is not installed, access only with service key inserted
> Baud rate Speed (in Baud) of data transfer 57.600
> Handshake Data transfer protocol RTS/CTS
Default storage Denition of the default storage, which can be operated by the
control panel
USB Memory : USB ash drive at USB master interface
IFFS : Internal Flash File System.
USB
Memory
Character set Selection of the character set table for adaptation to the computer
system used. Switching the character set via software is not
possible. Characters not available in the selected character set can
be accessed using the Unicode table.
UTF-8
Interpreter Menu for choosing between the programming languages JScript and
ZPL individually for the respective interfaces
JScript
Table 6 Parameters of the menu Setup > Interfaces

16
17
4 Conguration
4.1.5 Status Line
Select the parameters (widgets) to be displayed in Ready mode.
Start Ofine menu.
Select Setup > Status line.
Activate the desired widgets.
iNotice!
Because of the limited width of the display it is not possible to display all widgets simultaneously.
Widget Meaning Default
Clock Displays the current time. On
Date sheet Displays the current calendar day. On
Date/time
digital
Digital display of current date and time Off
Temperature Displays the current printhead temperature. Off
Ribbon supply Displays the current ribbon supply in the form of a horizontal bar. Off
Cutter Displays a cutter connected On
Ethernet Status Displays the Ethernet status Off
WLAN Displays the WLAN status
- grey symbol if WLAN adapter is installed
- black symbol if WLAN adapter is connected to an Access Point
Off
Bluetooth Displays the Bluetooth status
- grey symbol if Bluetooth adapter is installed
- black symbol if Bluetooth connection is active (paired, serial port open)
Off
Data transfer Displays the current data transfer in the form of a falling drop. On
Table 7 Parameters of the menu Setup > Status line
4.1.6 Security
By activating a PIN, the Setup menu, certain storage device functions and the rmware update can be protected
from unauthorized access.
The protected menu items are then only accessible after the PIN is entered.
Start Ofine menu.
Select Setup > Security.
Parameter Meaning Default
Security Status of the PIN activation Off
PIN Setting of the PIN 0000
Table 8 Parameters of the menu Setup > Security

18 18
4 Conguration
4.2 Conguration via the Web Interface
The parameters accessible via the control panel can also be set via the web interface contained in the rmware of the
printer. In addition, other parameters for the Ethernet and WLAN interfaces are accessible there.
The printer web interface can be accessed with a browser (e.g. Microsoft Internet Explorer, Mozilla Firefox) with
JavaScript activated via the Ethernet interface or the optional WLAN interface.
4.2.1 Calling Up the Web Interface
!
Attention!
Whenever settings are changed via the web interface you are requested to enter the user name "admin"
and a password. The default value of the password is also "admin". The password can be changed via the
web interface ( “Setup Tab” on page 20).
Start the browser.
Call the web interface by entering the IP address via HTTP (e.g. http://192.168.100.208).
The "Status" tab is open on the home screen.
4.2.2 Description of the Web Interface
The web interface contains the following tabs:
• Status: general status description  “Status tab” on page 19.
• Setup: conguration parameter settings  “Setup tab” on page 20.
• Interpreters: Interface setting to the interpretation of JScript or ZPL data  “Interfaces tab” on page 46.
• Notications: Activation of sounds and status or error messages via SNMP or e-mail
 “Notications tab” on page 23.
• Devices: list of the hardware and optional components  “Devices tab” on page 24.
• Fonts: overview of the available fonts  “Fonts tab” on page 24.

18
19
4 Conguration
Status tab
Fig. 5 "Status" tab on the printer web interface
The following information is contained in the left top section of the "Status" tab:
• Printer type
• Firmware version
• Serial number of the PCB CPU
• Operative time of the printer
• Number of labels printed since commissioning
• Previously printed paper length with thermal transfer printing
• Previously printed paper length with thermal direct printing
A list of the events which have occurred since the printer was switched on is to be found in the left bottom section of
the tab.
The right section of the tab shows the current printer display information.
iNotice!
By clicking the buttons the printer can be operated in the same manner as by using the touchscreen on the
device.
When the printer display is selected by mouse click, it is possible to use the computer keyboard in the same
manner like an External Keyboard ( 10.3 on page 46) e.g. for entering variable input data.

20 20
4 Conguration
Setup tab
On the "Setup" tab all the conguration parameters can be set which are also accessible via the control panel in the
Setup menu. In addition, other parameters for the Ethernet interface or the WLAN interface can be set (see below).
Fig. 6 "Setup" tab on the printer web interface
To change a parameter:
1. Locate parameter in the tree structure.
2. Set the value of the parameter at the right end of the concerning line.
A prompt to enter user name and password appears  page 21.
3. Enter user name and password and click OK.