Cabinet Bed Deluxe Series User manual

Deluxe Series
Assembly Instructions
1) Place the drawer pedalstal onto a at surface. Use
adjustable levelers on both sides and ensure even
level.
3) Pull out the bottom drawer until its fully extended,
4) Lock the drawer in place by unfolding the drawer
and deck support (felt side up). e drawer will NOT
be able to close when done correctly. Filp up the Lid,
en undo the barrel bolt on each side and slowly
lower the front panel until it rests on the drawer box.
2) Place Cabinet on top of the drawer pedalstal. Line
up predrilled holes and use allan key
(provided) to screw in bolts. ere are 3 per side.

5) Push Tap in on center locking mechanism and
unfold deck support 90 degrees until until you hear a
clicking sound.
7) Unfold deck all the way until the deck is touching
the ground.
8) Pull out mattress fully as shown above.
To fold up, reverse steps 3-8.
6) Unfold deck supports on both sides 90 degrees un-
til until you hear a clicking sound. When closing bed,
To lock, click button