Cabinet Bed Stanley User manual

Stanley
Assembly Instructions
1) Place the drawer pedalstal onto a at surface. Use
adjustable levelers on both sides and ensure even
level.
3) Pull out the bottom drawer until its fully extended 4) Unlatch the upper side latches on the inside of the
cabinet, then unhinge safety latch and unfold deck
onto the drawer pedalstal.
2) Place Cabinet on top of the drawer pedalstal. Line
up predrilled holes and use allan key
(provided) to screw in bolts. ere are 3 per side.

5) Push Tap in on center locking mechanism and
unfold deck support 90 degrees until until you hear a
clicking sound.
7) Pull out mattress fully as shown above.
To fold up, reverse steps 3-7.
6) Unfold deck all the way until the deck is touching
the ground.