Cadillac 2005 STS User manual

Overview ........................................................ 1-1
Overview .................................................. 1-2
Features and Controls ..................................... 2-1
Features and Controls ................................ 2-2
Navigation Audio System ................................ 3-1
Navigation Audio System ............................ 3-2
Voice Recognition ........................................... 4-1
Voice Recognition ...................................... 4-2
Vehicle Customization ..................................... 5-1
Vehicle Customization ................................. 5-2
Phone ............................................................ 6-1
Phone ...................................................... 6-2
Index ................................................................ 1
2005 Cadillac STS Navigation System M

GENERAL MOTORS, GM, the GM Emblem, CADILLAC,
the CADILLAC Crest & Wreath and the name STS are
registered trademarks of General Motors Corporation.
DTS and DTS Digital
Surround are registered
trademarks of Digital
Theater Systems, Inc.
The information in this manual supplements the owner
manual. This manual includes the latest information
available at the time it was printed. We reserve the
right to make changes in the product after that
time without notice.
Keep this manual with the owner manual in the vehicle,
so it will be there if it is needed while you are on the
road. If the vehicle is sold, leave this manual and
the owner manual with the vehicle.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
Manufactured under license from Dolby
®
Laboratories.
Dolby
®
and the double-D symbol are trademarks of
Dolby
®
Laboratories. Confidential unpublished works.
Copyright 1992–1997 Dolby
®
Laboratories. All rights
reserved.
Litho in U.S.A.
Part No. 10376371 A First Edition
©
2004 General Motors Corporation. All Rights Reserved.
ii

Overview .........................................................1-2
Navigation System Overview ............................1-2
Getting Started ...............................................1-3
Section 1 Overview
1-1

Overview
Navigation System Overview
1-2

A. Display Screen.
B. Map DVD Eject Key. See “Hard Keys” under Using
the Navigation System on page 2-2 for more
information.
C. Map DVD Loading Slot.
D. CD/DVD Changer Loading Key. See Six-Disc
CD/DVD Changer on page 3-12 for more information.
E. CD/DVD Changer Eject Key. See Six-Disc CD/DVD
Changer on page 3-12 for more information.
F. CD/DVD Changer Loading Slot.
G. Power/Volume Knob. See “Hard Keys” under Using
the Navigation System on page 2-2 for more
information.
H. Navigation Screen Tilt Key (in/out). See “Hard Keys”
under Using the Navigation System on page 2-2
for more information.
I. SRCE (Source) Key. See Six-Disc CD/DVD Changer
on page 3-12 for more information.
J. Audio Key. See Six-Disc CD/DVD Changer on
page 3-12 for more information.
K. CONFIG Key. See Configure Menu on page 2-49 for
more information.
L. Navigation Voice Prompt Repeat Key. See “Hard
Keys” under Using the Navigation System on
page 2-2 for more information.
M. Seek/Scan Key (up/down). See Six-Disc CD/DVD
Changer on page 3-12 for more information.
N. BAND Key. See Six-Disc CD/DVD Changer on
page 3-12 for more information.
O. AUX (Auxiliary) Key. See “Hard Keys” under Using
the Navigation System on page 2-2 for more
information.
P. ROUTE Key. See Enter Destination on page 2-6 for
more information.
Q. Map Key. See “Hard Keys” under Using the
Navigation System on page 2-2 for more information.
R. Tune Knob. See Six-Disc CD/DVD Changer on
page 3-12 for more information.
Getting Started
Before you begin to operate the navigation system, read
this manual thoroughly to become familiar with it and
to understand how the system works.
The navigation system allows you to do the following:
•Plan a route with provided turn-by-turn route
and map guidance with voice prompts.
•Select a destination using various methods and
choices.
•Receive broadcast announcements on traffic and
emergency alert communications.
1-3

The information in the system may not always be
complete. Road conditions such as prohibited turns,
detours, and construction zones, change frequently. It is
important to consider whether you can follow the
directions given by the system for the current conditions.
Each time you first start your vehicle and turn on the
navigation system by touching the map hard key,
you will see this screen. You can touch Agree to
proceed into the system, or the globe symbol in the
lower left corner of the screen to change the language
of the system. For more information on changing
the language, see Personalization on page 5-2.
When getting started you may set the navigation system
to your preference using various options. To do so,
reference the following topics:
•To adjust screen appearance, see “Screen
Appearance” under Configure Menu on page 2-49.
•To adjust the clock and other time options,
see “Clock” under Configure Menu on page 2-49.
•To plan a route, see Enter Destination on page 2-6.
•To adjust the volume of voice guidance prompts
or voice recognition, see “Navigation Set Up”
under Configure Menu on page 2-49.
1-4

Features and Controls ......................................2-2
Using the Navigation System ...........................2-2
Enter Destination ............................................2-6
Stored Locations ...........................................2-28
Maps ..........................................................2-41
Symbols ......................................................2-43
Keyless Access System .................................2-47
OnStar
®
System ...........................................2-48
Configure Menu ............................................2-49
Global Positioning System (GPS) ....................2-59
Vehicle Positioning ........................................2-60
Problems with Route Guidance .......................2-61
If the System Needs Service ..........................2-62
Ordering Map DVDs ......................................2-62
Database Coverage Explanations ....................2-62
Section 2 Features and Controls
2-1

Features and Controls
Using the Navigation System
This section presents basic information you will need to
know to operate the navigation system.
Use the hard keys located on the navigation system
along with the available touch screen buttons on
the navigation screen to operate the system. See
Navigation System Overview on page 1-2 for more
information.
Once the vehicle is moving, various functions will be
disabled to reduce driver distractions.
Hard Keys
The following hard keys are located on the navigation
system:
Z(Map DVD Eject): Press the eject key located
next to the map DVD loading slot to eject the map DVD.
The map DVD slot is the slot directly below the display
screen.
M(Load): Press the CD/DVD changer loading key to
go to the loading screen and begin loading DVDs or
CDs. See Six-Disc CD/DVD Changer on page 3-12 for
more information.
Z(CD/DVD Eject): Press the eject key next to the
CD/DVD changer loading slot to begin ejecting DVDs or
CDs. See Six-Disc CD/DVD Changer on page 3-12
for more information.
On(Power/Volume): Press the power/volume knob
to turn the audio system on and off. Turn the knob to
increase or decrease the volume to the audio system.
ymz(Tilt): Press the up arrow on the tilt key to tilt
the navigation screen forward. Press the down arrow
on the tilt key to tilt the screen rearward. There are three
tilt positions to choose from.
BAND: Press the BAND key to change bands. The
BAND key will toggle among the bands available, FM,
AM, XM, and WX. See Navigation Audio System
on page 3-2.
SRCE (Source): Press the source key to switch
between the audio sources. Pressing this key will switch
between the radio and the CD/DVD player. See
Navigation Audio System on page 3-2.
AUX (Auxiliary): Press the AUX key to access screens
from which you will operate Bluetooth
®
, OnStar
®
,or
control video input. See Bluetooth
®
Phone on page 6-2.
2-2

e(Audio): Press the audio key to access the Audio
Adjust screen, where you can adjust your base,
mid, fade, balance and DSP settings. See Navigation
Audio System on page 3-2.
ROUTE: Press the ROUTE key to access the
Destination Entry screen or the search area and begin
planning a destination. See Enter Destination
on page 2-6.
CONFIG (Configure): Press the CONFIG key to
access the desired SET UP Function screen. See
Configure Menu on page 2-49.
)(Map): Press the map key to access the map screen.
k(Navigation Repeat): Press the navigation repeat
key to repeat the last voice guidance prompt, while
you are on a route.
y©¨z (Seek/Scan): Press the seek/scan arrows
to go to the next or previous radio station and stay
there, or press and hold to scan stations. See Navigation
Audio System on page 3-2.
Tune Knob: Turn the tune knob to go to the next or
previous radio station and stay there. See Navigation
Audio System on page 3-2.
Alpha-Numeric Keypad
Letters of the alphabet, symbols, punctuation, and
numbers, when available to you, will be displayed on
the navigation screen as an alpha or numeric keypad.
The alpha keypad will be displayed when the system
needs you to input a city or street name. You can also
touch the symbol button (Sym.) at the bottom of the
alpha keypad to access the numeric keypad when
inputting a house address, punctuation mark, or other
character. There are three pages of different symbols
available. Touch A - Z to return to the alpha keypad.
Touch Others to get to a alpha keypad with special
characters. There are two pages of characters available
under the Others selection. On either the Symbol or
Others screens, using the arrows at the bottom next to
the page numbers will navigate you through the rest
of the screens available.
All characters are touch-sensitive screen buttons. Touch
a character to select it.
U:Select the space symbol on the A - Z screen to
enter a space between characters or the words of a
name.
V:Select the backspace symbol if you have selected
an incorrect character.
2-3

To make your name selections easier, the system will
only allow you to select a character which can follow the
last one entered. For example, if you enter Z, you
would not be allowed to follow it with T. The system will
highlight the available characters and darken the
unavailable characters.
If you are unsuccessful when inputting a name, it may
need to be selected differently. It is also possible that the
map DVD database may not contain that information
or the correct search area has not been selected. See
Database Coverage Explanations on page 2-62 for
more information.
The following screens are some of the different alpha
keypads you will have access to:
2-4

Touch-Sensitive Buttons
Touch-sensitive screen buttons are located on the
screen. When you have successfully selected a screen
button, a beep will sound. These buttons will be
highlighted when a feature is available and dim when
they are unavailable. There are also some toggle screen
buttons that will be light blue when active and dark
blue when inactive.
2-5

Enter Destination
Press the ROUTE key to access the Destination Entry
screen. From this screen, you can choose from several
options to plan a route by entering destination points.
The DESTINATION ENTRY screen allows you to also
select the area included in the search for your
destination. A map of the United States and a part of
Canada divided into 11 regions is shown.
Before selecting a method of destination entry, review
the search area map to make sure your destination
is located in the highlighted region.
If you need to see a list of states included in the
highlighted region, or to change the region, touch
REGION from the DESTINATION ENTRY screen. The
SEARCH AREA screen will be displayed. Touch the
numbered screen button to the right of the search area
map that corresponds with the numbered region you
wish to choose or to view a list of states included in the
region selected. You may also touch the down arrow
to the right of the search area map to choose CAN for
Canada. Once your selection has been made, you
will see the area covered on the map highlighted. Touch
the back key to return to the DESTINATION ENTRY
screen. The new selection will be stored once you select
the back touch screen key.
2-6

To enter a destination, choose from one of the following
destination entry methods:
Address
The address destination entry method allows you to
input an address by providing the system with a house
number, street name, and city.
If you choose Any City, the system will generate a list
of all cities containing that street name. If you choose
5 Nearest Cities, the system will generate a list of
the five nearest cities containing that street name.
C(Address): Touch this screen button to access the
ADDRESS screen. At this point you can choose to
enter the address one of three ways, either house
number first, street first or city first.
To use the house number first destination entry method,
do the following:
1. Touch the numeric keypad to input the house
number.
2. Touch the Street button to enter the street name
using the alpha keypad.
3. A list of available street names will be displayed if
there are less than 5 items available. You may
select the list screen button at any time to view the
available list. Select the correct street with the
correct prefix from the list.
4. The Navigation System will either display a list of
available cities or go to the map screen directly
based on the input.
5. Select the desired city name on the list.
A map screen will then appear with the destination
marked.
2-7

To use the street name first destination entry method,
do the following:
1. Select the Street screen button from the address
menu and start inputting the street name using the
alpha keypad. A list of available street names
will be displayed if there are less than 5 items
available. You may select the list screen button at
any time to view the available list.
2. Select the desired street name with the correct
prefix from the list (Dr., Ln., St., etc.).
3. The Navigation System will display a list of available
cities. Select the correct city from the list.
4. The numeric keypad will be displayed, allowing you
to enter the house number.
5. Press OK.
A map screen will then appear with the destination
marked.
To use the city name first destination entry method, do
the following:
1. Touch the City button.
2. Select from the choices shown on the City screen,
Any City, 5 Nearest Cities, Input City Name, or from
the Last 5 Cities used.
Using the Any City choice will take you back to the
house number first entry method.
Using the 5 Nearest Cities choice, the system will
display the 5 cities nearest your current position.
Using the Input City Name choice will allow you to
input the city name with the alpha keypad.
Using the Last 5 Cities choice, the system will
display a list of the last five city names used.
3. If using the alpha keypad, finish inputting the city
name and then touch the list touch screen button to
display a list of available cities. Choose a city from
the list. If choosing from one of the prior mentioned
lists, select the city from the list displayed.
4. The House number screen will be displayed. Input
the house number using the numeric keypad.
5. Select the Street screen button from the address
menu and start inputting the street name using the
alpha keypad. A list of available street names
will be displayed if there are less than 5 items
available. You may select the list screen button at
any time to view the available list.
6. Select the desired street name with the correct
prefix (Dr., Ln, St., etc.) from the list
A map screen will then appear with the destination
marked.
See “Getting Started on Your Route” later in this section
for more information.
2-8

Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to choose a destination from the POI list.
i(Point of Interest): Touch this screen button to
access the POINT OF INTEREST screen. From
this screen you have three options to select/input your
destination. You can either input the name using
the alpha keypad, select a category from the category
list or select the city by touching the city name and then
using the alpha keypad.
Then, to use this destination entry method by inputting
the name, do the following:
1. Use the alpha keypad to enter the POI name.
Touch Sym. to view a list of symbols to add
when entering a POI, touch Others to view a list of
special characters you can choose from, or
touch A - Z to return to the alpha keypad.
2. A list of POIs will appear if there are fewer than five
POIs found using the information from the alpha
keypad input. You may also touch the List button at
any time to view available POIs.
3. Select the desired POI from the list.
A map screen will then appear with the destination
marked.
2-9

To use this destination entry method by selecting a
category, do the following:
1. Touch the Category screen button from the POINT
OF INTEREST screen to view a list of POI
categories.
2. Choose a category, and then a sub-category.
3. The Navigation System will display available POIs
names in the selected sub-category or if the list is
too long the system will display the alpha keypad.
4. If the alpha keypad is displayed, input the POI name
until a list of available POIs appears. You may also
select the List screen button when it becomes
available.
5. Select the POI from the list.
A map screen will then appear with the destination
marked.
To use this destination entry method by selecting a city,
do the following:
1. Select the city screen button, then choose from Any
City, 5 Nearest Cities, Input City Name or from the
Last 5 Cities list. If you choose Any City, the system
will return to the name POI input method/screen. If
you choose 5 Nearest Cities, the system will
generate a list of the five nearest cities to your
current position. Or you can select from the last five
cities that were used. If you choose to input the city
name the system will display the alpha keypad.
2. Input the city name using the alpha keypad.
3. Select the desired city from the list displayed.
4. Use the alpha keypad to enter the POI name.
Touch Sym. to view a list of symbols to add
when entering a POI, touch Others to view a list of
special characters you can choose from, or
touch A - Z to return to the alpha keypad.
5. A list of POIs will appear if there are fewer than five
POIs found using the information from the alpha
keypad input. You may also touch the List button at
any time to view available POIs.
6. Select the desired POI from the list.
A map screen will then appear with the destination
marked.
See “Getting Started on Your Route” later in this section
for more information.
2-10

Map
The map destination entry method allows you to choose
a destination by scrolling on the map.
I(Map): Touch this screen button to enter the map
destination entry method.
Then, to use this destination entry method, do the
following:
1. Touch the map for the desired area you wish to set
as your destination.
2. Use the zoom in/out function to view the direction of
the desired area.
3. Pressing/holding and dragging on the map will
activate fast scrolling. Press/touch once on the
area to which you would like to move the current
position mark.
4. On the map screen you will then see the destination
marked and the address information for the current
destination mark. Touch the destination screen
button or the waypoint screen button to save the
address as a destination or waypoint. Touching the
memory point screen button will store the address
as a memory point. Touching the POI screen button
will display the QUICK-POI screen.
See “Getting Started on Your Route” later in this section
for more information.
2-11

Intersection
The intersection destination entry method allows you to
set two intersecting streets as your destination.
M(Intersection): Touch this screen button to access
the INTERSECTION screen.
To enter a destination using the intersection entry
method, do the following:
1. Enter the first of two streets in the intersection. The
List option may become available.
2. You may now choose a street from the list, or
continue to spell the street name to further
reduce the number of available items. Select the
street with the correct prefix (Dr., Ln., St., etc.).
3. After the first street has been chosen, enter the
second street name. The List option may again
become available.
4. You may now choose the second street from the
list, or continue to spell the street name to further
reduce the number of available items. Select
the street with the correct prefix (Dr., Ln., St., etc.).
After both streets have been chosen, a map
screen will then appear with the destination marked.
See “Getting Started on Your Route” later in this section
for more information.
2-12

Phone Number
The phone number destination entry method allows you
to choose a destination by entering a phone number
that is contained on the map DVD.
U(Phone Number): Touch this screen button to
access the PHONE NUMBER screen.
Then, to use this destination entry method, do the
following:
1. Input the area code and phone number of a POI
using the numeric keypad.
2. If the phone number can be found on the map
DVD, a map screen will then appear with the
destination marked.
See “Getting Started on Your Route” later in this section
for more information.
2-13

Freeway Entrance/Exit
The freeway entrance/exit destination entry method
allows you to choose a destination by entering a freeway
entrance or exit point.
K(Freeway Entrance/Exit): Touch this screen button
to access the FREEWAY ENT/EXIT screen.
Then, to use this destination entry method, do the
following:
1. Touch the Freeway screen button and enter the
freeway name. Be sure to use abbreviations,
such as I - 75, rather than spelling out Interstate.
Touch Sym. to view a list of symbols to add
when entering a freeway name, touch Others to
view a list of special characters you can choose
from, or touch A - Z to return to the alpha keypad.
A list of freeways will appear.
2. Choose a freeway from the list, and then choose
whether you want an exit point or an entrance point.
You can choose an exit/entrance point from the list,
input it by name, or sort the list by distance or name.
If you choose to input the freeway name, the alpha
keypad will be displayed. Touch the alpha keypad to
enter the freeway exit or entrance name. Touch the
Name Sort screen button to sort the list by name.
Touch the Dist. Sort screen button to have the list
sorted by distance.
After choosing a point from the list, a map screen
will then appear with the destination marked.
See “Getting Started on Your Route” later in this section
for more information.
2-14