Cadillac CTS 2010 User manual

Infotainment System ......... 3
Introduction ...................... 3
Overview ....................... 4
Radio ............................. 12
AM-FM Radio ............... 12
Satellite Radio .............. 17
Audio Players ................ 20
CD/DVD Player ............ 20
MP3 ........................... 26
Hard Drive
Device (HDD) .......... 30
Auxiliary Devices .......... 35
Navigation ...................... 41
Using the Navigation
System .................. 41
Maps .......................... 43
Navigation Symbols ....... 45
Destination .................. 50
Configure Menu ............ 62
Global Positioning
System (GPS) ......... 70
Vehicle Positioning ........ 70
Problems with Route
Guidance ................ 71
If the System Needs
Service .................. 72
Ordering Map DVDs ...... 72
Database Coverage
Explanations ........... 72
Voice Recognition .......... 72
Speech Recognition ...... 72
Index .................................. i-1
2010 Cadillac CTS/CTS-V Navigation System M

Introduction
GENERAL MOTORS, GM, the
GM Emblem, CADILLAC, the
CADILLAC Crest & Wreath, and the
name CTS are registered trademarks
of General Motors LLC.
DTS and DTS Digital surround are
registered trademarks of Digital
Theater systems, Inc.
Gracenote
®
is a registered
trademark of Gracenote, Inc.
The Gracenote logo and logotype,
and the “Powered by Gracenote”
logo are trademarks of Gracenote.
Dolby
®
is manufactured under
license from Dolby
®
Laboratories.
Dolby
®
, MLP Lossless, and the
double-D symbol are trademarks of
Dolby
®
Laboratories.
This product incorporates copyright
protection technology that is
protected by U.S. patents and other
intellectual property rights. Use of
this copyright protection technology
must be authorized by Macrovision,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly
is prohibited.
The information in this manual
supplements the owner manual.
This manual includes the latest
information available at the time it
was printed. We reserve the right to
make changes in the product after
that time without notice. For vehicles
first sold in Canada, substitute the
name General Motors of Canada
Limited for Cadillac Motor Car
Division whenever it appears in
this manual.
Litho in U.S.A.
Part No. 20814350 B Second Printing
©
2010 General Motors LLC. All Rights Reserved.
Infotainment System 3

Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle is
sold, leave this manual in the vehicle.
Canadian Owners
(Propriétaires Canadiens)
A French language copy of
this manual can be obtained from
your dealer/retailer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l’adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numèro de poste 6438
de langue française
www.helminc.com
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features intended
to help do this. Some features may
be disabled while driving. Note that
these functions are grayed-out. A
grayed-out function indicates it is not
available when the vehicle is moving.
All functions are available when the
vehicle is parked. Do the following
before driving:
•Become familiar with the
navigation system operation,
hard keys on the faceplate, and
touch-sensitive screen buttons of
the navigation system.
•Set up the audio by presetting
favorite stations, setting the tone,
and adjusting the speakers.
•Set up the navigation features
before beginning driving, such as
entering an address or a preset
destination.
•Set up your phone numbers in
advance so they can be called
easily with the press of a single
button or a single voice command
(for navigation systems equipped
with phone capability).
{WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{WARNING
Avoid looking too long or too
often at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
4 Infotainment System

Use the navigation system to:
•Plan a route.
•Select a destination using
various methods and choices.
•Follow turn-by-turn route and
map guidance with voice prompts,
only if permitted by traffic laws,
controls, and conditions.
•Receive RDS broadcast
announcements.
Always be alert and obey traffic and
roadway laws and instructions,
regardless of the guidance from the
navigation system. Because the
navigation system uses street map
information that does not include
all traffic restrictions or the latest road
changes, it may suggest using a road
that is now closed for construction or
a turn that is prohibited by signs at
the intersection. Because the system
uses limited information, always
evaluate whether following the
system’s directions is safe and legal
for the current conditions.
When the navigation system is
turned on, a screen may appear
with the information below, and you
must read and acknowledge the
information it contains.
{WARNING
Taking your eyes off the road for
extended periods could cause a
crash resulting in injury or death
to you or others.
To help avoid a crash in which you
or others could be killed:
•Always concentrate on your
driving first by keeping your eyes
and mind on the road, and your
hands on the wheel.
•Follow system directions only if
permitted by traffic laws, controls,
and conditions.
•Before using this system, read the
owner manual and learn how it
operates.
•Some system controls cannot be
used the when vehicle is moving.
After acknowledging the start up
information you will be able to
access the NAV (navigation) and
DEST (destination) functions. Once
accessed, enter or delete information
in the navigation system or access
other functions. See instructions later
in this section.
Each time the vehicle is started
and the navigation system is turned
on, the Caution screen appears.
Infotainment System 5

If the Caution screen appears,
touch OK to accept the Caution.
If OK is not selected, all hard keys
except for NAV (navigation) and
DEST (destination) can be accessed.
Once the NAV or DEST hard keys
are pressed, this Caution screen
appears and OK must be pressed to
access the navigation map.
When getting started the navigation
system can be set to preferences or
information that has been entered
can be deleted using various options.
A. VOL/ O(Volume/Power Knob).
See “Hard Keys” under Using
the Navigation System on
page 41 for more information.
B. TUNE/TONE Knob. See “Hard
Keys” under Using the Navigation
System on page 41 for more
information.
6 Infotainment System

C. NAV nm(Navigation Screen
Up/Down). See “Hard Keys”
under Using the Navigation
System on page 41 for more
information.
D. !(Dimming Change Button).
See “Display” under Using the
Navigation System on page 41
for more information.
E. FAV (Favorite) key. See “Storing
Radio Station Presets” under
AM-FM Radio on page 12
and Satellite Radio on page 17
for more information.
F. utSEEK Key. See AM-FM
Radio on page 12,Satellite
Radio on page 17,CD/DVD
Player on page 20, and Hard
Drive Device (HDD) on page 30
for more information.
G. Z(CD/DVD Eject) Key.
See CD/DVD Player on page 20
for more information.
H. AUDIO key. See AM-FM Radio
on page 12,Satellite Radio on
page 17,CD/DVD Player
on page 20,Hard Drive Device
(HDD) on page 30, and
Auxiliary Devices on page 35 for
more information.
I. NAV (Navigation) Key. See “Hard
Keys” under Using the Navigation
System on page 41 for more
information.
J. oMENU pSELECT Knob.
See “Hard Keys” under Using the
Navigation System on page 41
for more information.
K. REC (Record) Key. See Hard
Drive Device (HDD) on page 30
for more information.
L. CONFIG (Configure) Key.
See Configure Menu on page 62
for more information.
M. k(Play/Pause) Key. See
“Timeshift, USB, and iPod” under
AM-FM Radio on page 12,
Satellite Radio on page 17,
CD/DVD Player on page 20,
Hard Drive Device (HDD) on
page 30, and Auxiliary
Devices on page 35 for more
information.
N. \FWD (Forward) Key.
See “Timeshift, USB, and iPod”
under AM-FM Radio on page 12,
Satellite Radio on page 17,
CD/DVD Player on page 20,Hard
Drive Device (HDD) on page 30,
and Auxiliary Devices on page 35
for more information.
O. sREV (Reverse) Key.
See “Timeshift, USB, and iPod”
under AM-FM Radio on page 12,
Satellite Radio on page 17,
CD/DVD Player on page 20,
Hard Drive Device (HDD) on
page 30, and Auxiliary Devices
on page 35 for more information.
Infotainment System 7

P. RPT (Repeat) Key. See “Hard
Keys” under Using the Navigation
System on page 41 for more
information.
Q. DEST (Destination) Key.
See Destination on page 50 for
more information.
R. CD/DVD Slot. See CD/DVD
Player on page 20 for more
information.
S. DEL (Delete) Key. See “XM™
Satellite Radio Service” under
Satellite Radio on page 17
and Hard Drive Device (HDD) on
page 30 for more information.
T. INFO (Information) Key.
See Speech Recognition on
page 72 for more information.
Language — English/Metric
To change the language of the
navigation screens, see “DIC
Vehicle Customization” in the Index
of the vehicle’s owner manual.
To change the navigation screens
from English or metric, see “DIC
Operation and Displays” in the Index
of the vehicle’s owner manual.
Deleting Personal Information
This navigation system can record
and store destinations and personal
information such as names and
addresses. When disposing of the
vehicle, you may want to delete this
information. See “Previous
Destinations — Deleting” and
“Address Book — Editing and
Deleting Entries” under Destination
on page 50 for deleting this
information.
Storing Radio Station Presets
Up to 36 preset stations can
be stored. AM, FM, and XM
(if equipped) can be mixed.
To store presets:
1. Press the O(power) knob to
turn the system on.
2. If viewing a map screen, touch
the source screen button, press
the AUDIO key, or press the
FAV (favorite) key.
3. Select the band.
4. Seek or tune to the desired
station, to select the station.
5. Press and hold one of the preset
screen buttons for more than
one and a half seconds.
6. Repeat the steps for each
preset.
To change the number of preset
pages, see “Number of Preset
Pages” under “Radio Menu” under
AM-FM Radio on page 12 and
Satellite Radio on page 17 for more
information.
8 Infotainment System

Entering an Address and
Point of Interest, and Storing
Preset Destinations
The vehicle must be in P (Park) to
perform these operations.
Entering an Address
If having trouble finding a city or a
street name:
•Enter the street name first
instead of the city name, or vice
versa.
•Enter more characters or reduce
the amount of characters to
reduce or expand the available
options.
To set a destination by entering a
street name:
1. Press the Oto turn the
system on.
2. A caution may appear. Touch the
OK screen button to proceed.
3. Press the DEST hard key.
4. Select the Street screen button.
5. The Street name category is
automatically selected for entry.
Start entering the street name.
It is recommended that
directional information or street
type is not entered, and use
the Space screen button
between street or city names.
For example, the street name
N. Royal Oak Rd. should
be entered as royal(Space
screen button)oak. Use the
backspace ( q) screen
button if an incorrect character
has been entered.
If four or less names are
available for the entered
characters, a list displays.
If more than four are available,
there is a match counter
with a number in it, it represents
the number of available streets.
Select the List button to view
the list and select a street.
While the Street name category
is empty, there is a Last 5
Streets screen button that
displays the last five selected
streets. Press this button
to select a street from the list.
6. Enter the house number.
The system displays the house
number range that is available for
the street.
7. If there is more than one city,
the list of cities that have that
street name and house number
displays. Select a city from
the list.
8. A confirmation screen displays
with the address. If the address
is correct, select the Go screen
button. The system calculates
the route.
Infotainment System 9

9. Select the route preference
(Fastest, Shortest, or Easy).
The system highlights the route.
10. Select the Start Guidance
screen button. The route is now
ready to be started.
See “Address Entry” under
Destination on page 50 for more
information.
Entering a Point of Interest (POI)
To set a destination by entering
a Point of Interest (POI):
1. Press the Oto turn the
system on.
2. A caution may appear. Touch the
OK screen button to proceed.
3. Press the DEST hard key.
4. Press the Point of Interest screen
button.
5. Enter the specific title of the
POI in the POI name space
(i.e. Washington Monument).
If four or less names are
available, a list displays. If more
than four are available, there
is a match counter with a number
in it, it represents the number
of available POI names. Select
the List button to view the list.
Select the POI.
6. Select the Go screen button.
The system calculates the
route.
7. Select the route preference
(Fastest, Shortest, or Easy).
The system highlights the route.
8. Select the Start Guidance screen
button. The route is now ready to
be started.
See “Point of Interest (POI)” under
Destination on page 50 for more
information.
Storing Preset Destinations
1. Press the Oto turn the
system on.
2. A caution may appear. Touch the
OK screen button to proceed.
3. Press the NAV or DEST
hard key.
4. Enter a destination. See
Destination on page 50 for
information on how to enter
a destination.
5. Press the Add screen button
from the map screen to add
the current final destination to
the address book.
The address book screen
appears.
10 Infotainment System

6. Select the Name screen button.
An alpha-keyboard displays.
Enter the name.
7. Press and hold one of the screen
buttons at the bottom of the
screen until the text in the button
changes.
The address book entry name
appears in that preset destination
screen button and is now
available to select from the Select
Destination screen. See “Using
Your Stored Preset Destinations”
next in this section to select it as
a destination.
See “Adding or Changing
Preset Destinations” under
Destination on page 50 for more
information on how to add preset
destinations.
Using Your Stored Preset
Destinations
These destinations are available for
selection while driving.
1. Press the Oto turn the
system on.
2. A caution may appear. Touch the
OK screen button to proceed.
3. Press the DEST hard key.
4. Select one of the available preset
destination screen buttons.
The system calculates the route.
5. Select the route preference
(Fastest, Shortest, or Easy).
The system highlights the route.
6. Select the Start Guidance screen
button. The route is now ready to
be started.
See “Preset Destination” under
Destination on page 50 for more
information.
Canceling Guidance
Guidance is canceled once you
arrive at your final destination.
To cancel guidance prior to arrival
at the final destination:
1. Press the DEST hard key.
2. Press the Cancel Guidance
screen button.
3. Press the Yes screen button to
confirm cancellation.
Voice Guidance
To adjust the volume of voice
guidance prompts:
1. Press the CONFIG hard key to
enter the menu options, then
press the CONFIG key repeatedly
until Nav is selected or touch the
Nav screen button.
2. Press the Voice Volume screen
button.
3. Press the + (plus) or – (minus)
screen buttons to increase or to
decrease the volume of the voice
prompts.
Infotainment System 11

See “Voice Volume” under Speech
Recognition on page 72 for more
information.
Cleaning the Display
If the panel or the display is stained,
wipe it with a dry, soft cloth, such
as a silicon cloth.
Notice: If you use abrasive
cleaners when cleaning glass
surfaces, you could scratch the
glass. When cleaning the glass,
use only a soft cloth and do not
spray cleaner directly on the
system.
Do not apply spray cleaner directly
to the system, the cleaner could
affect the mechanical parts.
Do not wipe the panel with a hard
cloth or use a volatile liquid such as
thinner or alcohol, it could scratch
the surface or erase the characters.
Radio
AM-FM Radio
Playing the Radio
O(Power/Volume): Press to turn
the audio system on and off. Turn the
knob to increase or decrease the
volume.
TUNE/TONE Knob: Turn to go to
the next or previous frequency.
Press this knob to display the Sound
menu. See “Sound Menu” later in
this section.
AUDIO: Press to display the full
audio screen. Press the key to
switch between AM, FM, XM™
(if equipped), CD, DVD, HDD, and
AUX (auxiliary input), or touch the
screen button. See Satellite Radio
on page 17,CD/DVD Player on
page 20,Hard Drive Device (HDD)
on page 30, and Auxiliary Devices
on page 35.
Finding a Station
If viewing a map screen, touch the
source screen (AM, FM, etc.) button.
The display splits between the
audio screen and the map screen.
All station-changing functions can be
performed from this screen.
FM source shown,
other sources similar
12 Infotainment System

In order to view a split screen while
on a map screen, press the
AUDIO hard key.
AM/FM/XM: Select the source
(AM, FM, or XM™, if equipped)
screen button or press the AUDIO
key repeatedly until the desired
source is highlighted.
All: Touch the screen button,
located in the middle of the screen,
to receive a list of all of the selected
band stations in the area. Use the up
and down arrow screen buttons to
scroll the frequencies. Select the
frequency.
FM lists may also contain a category
to select if stations in the area
support Radio Data Systems (RDS).
DEL (Delete): Press to remove the
currently displayed category.
Restore CAT: Touch to restore a
category that was just removed
Restore All: Touch to restore all
categories that were removed.
Refresh: Touch to refresh the list
of stations.
When viewing a map screen, the
name of the station or channel
displays.
uSEEK / tSEEK: Press the left
or right arrow keys to go to the next
or previous station and stay there.
FM source shown,
other sources similar FM source shown,
other sources similar
Infotainment System 13

Storing Radio Station Presets
This feature allows you to store up
to 30 preset stations. You can mix
AM, FM, and XM™ (if equipped).
To store presets, do the following:
1. Press Oto turn the system on.
2. If viewing a map screen, touch
the source screen button, press
the AUDIO key, or press the
FAV (favorite) key.
3. Select the band.
4. Seek or tune to the desired
station, to select the station.
5. Press and hold one of the preset
screen buttons for more than
one and a half seconds.
6. Repeat the steps for each preset.
To change the number of preset
pages, see “Number of Preset
Pages” under “Radio Menu” later in
this section.
Sound Menu
TONE or CONFIG (Configure):
Press this knob or press the
CONFIG key to access the Sound
menu to adjust the treble, midrange,
bass, fade, balance, and Digital
Signal Processing (DSP).
TREBLE: Touch the plus (+) or
minus (−) sign to increase or
decrease the treble. If a station is
weak or has static, decrease
the treble.
MID (Midrange): Touch the plus (+)
or minus (−) sign to increase or
decrease the midrange.
BASS: Touch the plus (+) or
minus (−) sign to increase or
decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance): To
adjust the balance between the left
and the right speakers, touch and
hold the L or R screen buttons.
Front/Rear (Fade): To adjust the
fade between the front and the rear
speakers, touch and hold the Front
or Rear screen buttons.
14 Infotainment System

Digital Signal Processing (DSP)
If the system has Digital Signal
Processing (DSP), it is used to
provide a choice of five different
listening experiences. DSP can be
used while listening to the audio
system. The type of DSP selected is
displayed on the status screen.
Select from the following DSP
settings:
Normal: Select to adjust the
audio to be in normal mode.
This provides the best sound
quality or all seating positions.
Driver: Select to adjust the audio
to give the driver the best possible
sound quality.
Rear: Select to adjust the audio to
give the rear seat occupants the
best possible sound quality.
Radio Menu
Press the CONFIG key to enter
the menu screen, then press the
CONFIG key repeatedly until Radio
is selected or touch the Radio
screen button to make radio system
changes.
Additional Information Displayed
Touch the Additional Information
Displayed screen button to turn
station or channel information on
or off.
Touch the On screen button to
receive information, when it
is available, for the following;
FM radio text information.
Touch the Off screen button to
receive no information.
Number of Preset Pages
Touch the Number of Preset Pages
screen button to change the number
of preset pages, 1 through 6. Each
preset page can contain six preset
stations. Touch the desired
numbered screen button.
Noise Compensation
Technology: Your Bose
®
equipped
vehicle includes Bose AudioPilot
®
noise compensation technology.
When turned on, AudioPilot
®
continuously adjusts the audio
system equalization, to compensate
for background noise, so that the
music always sounds the same at
the set volume level.
Infotainment System 15

This feature is most effective at
lower volume settings where
background noise can affect how
well the music is heard being played
through the vehicle’s audio system.
At higher volume settings, where
the music is much louder than the
background noise, there may be little
or no adjustments by AudioPilot
®
.
For additional information on
AudioPilot
®
, please visit
bose.com/audiopilot.
To use AudioPilot
®
:
1. Press the CONIFG key to enter
the menu screen, then press the
CONFIG key repeatedly until
Radio is selected or touch the
Radio screen button
2. Press the Automatic Volume
Control screen button to
access the AudioPilot menu.
3. Press the ON screen button.
To turn off, touch the OFF screen
button.
Timeshift
Timeshift records all information
from AM, FM, XM™, etc. for up to
an hour. Timeshift allows you to
listen to information that was missed.
Once starting to listen to one of the
bands, timeshift automatically starts.
Once timeshift has recorded for
an hour, it will keep recording and
start removing the information from
the beginning.
Press k(pause) to stop hearing the
information through the speakers.
During this pause time, timeshift
keeps recording. Press k(play) to
continue listening where you left
off. During pause, a progress bar
displays, to show how much time
the system has been buffering.
Press kbefore turning the vehicle
off so that Timeshift keeps recording
for up to one hour. If the vehicle is
still off after an hour of recording, the
vehicle stops recording and all
information is lost.
If stations are switched, during
this hour period, timeshift erases
all information that was recorded
and starts recording from the current
band. If you switch to listening to
any other source, timeshift will
not record.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM stations
that broadcast RDS information.
With RDS, the radio can:
•Seek to stations broadcasting the
selected type of programming
•Receive announcements
concerning local and national
emergencies
•Display messages from radio
stations
16 Infotainment System

This system relies on receiving
specific information from these
stations and only works when the
information is available. In rare
cases, a radio station may broadcast
incorrect information that causes the
radio features to work improperly.
If this happens, contact the radio
station.
The RDS system is always on.
When information is broadcast from
the current FM station, the station
name or call letters display on
the audio screen. RDS may provide
a program type (PTY) for current
programming and the name of
the program being broadcasted.
Satellite Radio
Playing the Radio
O(Power/Volume): Press to turn
the audio system on and off. Turn the
knob to increase or decrease the
volume.
TUNE/TONE Knob: Turn to go to
the next or previous frequency.
Press this knob to display the Sound
menu. See “Sound Menu” later in
this section.
AUDIO: Press to display the full
audio screen. Press the key
to switch between AM, FM, XM™
(if equipped), CD, DVD, HDD,
and AUX (auxiliary input), or touch
the screen button. See AM-FM
Radio on page 12 for more
information.
Finding a Station
For information on finding and
changing a station, see AM-FM
Radio on page 12 earlier in
this section.
AM/FM/XM: Touch the source
(AM, FM, or XM™, if equipped)
screen button or press the AUDIO
key repeatedly until the desired
source highlights. See AM-FM Radio
on page 12 earlier in this section.
All: Touch the screen button,
located in the middle of the screen,
to receive a list of all of the selected
band stations in the area. Use the up
and down arrow screen buttons to
scroll the frequencies. Select the
frequency.
XM™ lists also contain a category to
select and the stations or channels
that pertain to the category.
For XM™, touch the left and right
arrow screen buttons to change
categories. The station information
displays.
Infotainment System 17

DEL (Delete): Press to remove the
currently displayed category.
Restore CAT: Touch to restore a
category that was just removed
Restore All: Touch to restore all
categories that were removed.
Refresh: Touch to refresh the list
of stations.
When viewing a map screen, the
name of the station or channel
displays.
uSEEK / tSEEK: Press the left
or right arrow keys to go to the next
or previous station and stay there.
Storing Radio Station Presets
This feature allows storage up
to 36 preset stations. AM, FM, and
XM
®
(if equipped) can be mixed.
See AM-FM Radio on page 12
earlier in this section.
Sound Menu
For more information on setting the
tone, adjusting the speakers,
and automatic equalization, see
AM-FM Radio on page 12 earlier in
this section.
Digital Signal Processing (DSP)
If the system has Digital Signal
Processing (DSP), it is used to
provide a choice of five different
listening experiences. DSP can be
used while listening to the audio
system. The type of DSP selected is
displayed on the status screen.
Select from the following DSP
settings:
Normal: Select to adjust the audio
to be in normal mode. This provides
the best sound quality or all seating
positions.
Driver: Select to adjust the audio
to give the driver the best possible
sound quality.
Rear: Select to adjust the audio to
give the rear seat occupants the
best possible sound quality.
Centerpoint
®
:Select to turn on
Bose Centerpoint
®
. Centerpoint
®
produces a full vehicle surround
sound listening experience from
a CD, MP3/WMA, DVD, AUX
(auxiliary) input, or XM™ stereo
digital audio source and delivers
five independent audio channels
from the conventional two channel
stereo recordings. This is not
available for AM or FM.
5.1 Surround: 5.1 Surround
sound processing is available for
DVD-A/DVD-V sources that
were recorded in 5.1 surround.
•5.1 Surround + Normal: Best for
all seating positions.
•5.1 Surround + Rear: Best for
the rear seating position.
18 Infotainment System

Radio Menu
Press the CONFIG key to enter
the menu screen, then press
the CONFIG key repeatedly until
Radio is selected or touch the
Radio screen button to make radio
system changes.
Additional Information Displayed
Touch the On screen button to
receive information, when it is
available, for the following;
FM: radio text, XM™: Song Title and
Artist Name, CD: CD text, MP3: tag
information.
Touch the Off screen button to
receive no information.
XM™ Category Restore
Touch the “Yes” button of Restore
All Categories screen to add all
categories that have been removed.
Touch the “No” button of Restore
All Categories screen to cancel.
XM™ Satellite Radio Service
XM™ is a satellite radio service
that is based in the 48 contiguous
United States and 10 Canadian
provinces. XM™ Satellite Radio
has a wide variety of programming
and commercial-free music,
coast-to-coast, and in digital-quality
sound. During your trial or when you
subscribe, you will get unlimited
access to XM™ Radio Online for
when you are not in your vehicle.
A service fee is required to
receive the XM service. For more
information, contact XM™ at
xmradio.com or call 1-800-929-2100
in the U.S. and xmradio.ca or call
1-877-438-9677 in Canada.
When XM™ is active, the channel
name and number, category
name, song title, and artist will
display on the screen.
XM™ Radio Messages
See “XM™ Radio Messages” in the
vehicle’s owner manual” for a list
of possible XM messages.
Infotainment System 19

Audio Players
CD/DVD Player
Playing a CD
The player can be used for CD,
MP3, and DVD audio and DVD
video.
With the ignition on, insert a CD or
DVD partway into the top visible
slot, label side up. The player pulls
it in and the CD or DVD should
begin playing. While playing a CD
or DVD audio, the navigation system
is available. If you insert a CD or
DVD with the system off and
the ignition on, it starts to play.
When you insert a CD or DVD,
Gracenote logo display starts with
the Gracenote database access and
the CD/DVD tab activates.
The vehicle must be in P (Park).
The player is only compatible with
CDs or DVDs of the appropriate
region code that is printed on
the jacket of most CDs and DVDs.
The CD/DVD slot is compatible
with most audio CDs, CD-R,
CD-RW, DVD-Video, DVD-Audio,
DVD-R/RW, DVD+R/RW media
along with MP3 and WMA
“un-protected” formats.
As each new track of a CD starts to
play, the track number displays.
The player can only play the full-size
(12 cm) discs.
If an error displays, see “CD/DVD
Messages” later in this section.
20 Infotainment System