Cadillac 2010 DTS Parts list manual

Black plate (1,1)
Cadillac DTS Navigation System - 2011
2011 Cadillac DTS Navigation System M
Infotainment System . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . 3
Overview . . . . . . . . . . . . . . . . . . . . . . . 4
Radio ....................... 12
AM-FM Radio . . . . . . . . . . . . . . . . . 12
Satellite Radio . . . . . . . . . . . . . . . . 17
Audio Players . . . . . . . . . . . . . . 18
CD/DVD Player . . . . . . . . . . . . . . . 18
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Auxiliary Devices . . . . . . . . . . . . . . 27
Navigation . . . . . . . . . . . . . . . . . . 27
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . . 27
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Navigation Symbols . . . . . . . . . . . 32
Destination .................... 37
Configure Menu . . . . . . . . . . . . . . . 49
Global Positioning
System (GPS) . . . . . . . . . . . . . . . 61
Vehicle Positioning . . . . . . . . . . . . 61
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . . 62
If the System Needs
Service . . . . . . . . . . . . . . . . . . . . . . 63
Ordering Map DVDs . . . . . . . . . . 63
Database Coverage
Explanations . . . . . . . . . . . . . . . . . 63
Voice Recognition . . . . . . . . . . 63
Index ..................... i-1

Black plate (2,1)
Cadillac DTS Navigation System - 2011

Black plate (3,1)
Cadillac DTS Navigation System - 2011
Infotainment System 3
Introduction
GENERAL MOTORS, GM, the GM
Emblem, CADILLAC, the CADILLAC
Crest & Wreath, and the name DTS
are registered trademarks of
General Motors LLC.
Manufactured under license under
U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and
worldwide patents issued &
pending. DTS and DTS Digital
Surround are registered trademarks
and the DTS logos and Symbol are
trademarks of DTS, Inc. ©
1996-2010 DTS, Inc. All Rights
Reserved.
Dolby
®
is manufactured under
license from Dolby
®
Laboratories.
Dolby
®
and the double-D symbol
are trademarks of Dolby
®
Laboratories.
The information in this manual
supplements the owner manual.
This manual describes features that
may or may not be on your specific
vehicle either because they are
options that you did not purchase or
due to changes subsequent to the
printing of this owner manual.
Please refer to the purchase
documentation relating to your
specific vehicle to confirm each of
the features found on your vehicle.
For vehicles first sold in Canada,
substitute the name “General
Motors of Canada Limited”for
Cadillac Motor Car Division
wherever it appears in this manual.
Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle is
sold, leave this manual in the
vehicle.
Litho in U.S.A.
Part No. 20969629 A First Printing ©2010 General Motors LLC. All Rights Reserved.

Black plate (4,1)
Cadillac DTS Navigation System - 2011
4 Infotainment System
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens)
A French language copy of this
manual can be obtained from your
dealer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de langue
française
www.helminc.com
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
The navigation system includes
navigation and audio functions.
While entering the vehicle or when
turning the vehicle off, some DVD
Map Disc noise is normal.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features
intended to help keep your eyes on
the road and mind on the drive.
Some features may be disabled
while driving. Note that these
functions will be grayed-out.
A grayed-out function indicates it is
not available when the vehicle is
moving.
All functions are available when the
vehicle is parked. Do the following
before driving:
.Become familiar with the
navigation system operation,
control buttons on the faceplate,
and touch-sensitive screen
buttons of the navigation
system.
.Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the
speakers.
.Set up the navigation features
before beginning driving, such
as entering an address or a
preset destination.
.Set up your phone numbers in
advance so they can be called
easily with the press of a single
button or a single voice
command (for navigation
systems equipped with phone
capability).

Black plate (5,1)
Cadillac DTS Navigation System - 2011
Infotainment System 5
{WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{WARNING
Avoid looking too long or too
often at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
Use the navigation system to:
.Plan a route.
.Select a destination using
various methods and choices.
.Follow turn-by-turn route and
map guidance with voice
prompts, only if permitted by
traffic laws, controls, and
conditions.
You should always be alert and
obey traffic and roadway laws and
instructions, regardless of the
guidance from the navigation
system. Because the navigation
system uses street map information
that does not include all traffic
restrictions or the latest road
changes, it may suggest using a
road that is now closed for
construction or a turn that is
prohibited by signs at the
intersection. Because the system
uses limited information, you must
always evaluate whether following
the system's directions is safe and
legal for the current conditions.
When the navigation system is
turned on, a screen may appear
with the information below, and you
must read and acknowledge the
information it contains.
After you acknowledge the start up
information you will be able to
access the NAV (navigation) and
DEST (destination) functions. Once
accessed, you can enter or delete
information in the navigation system
or access other functions. See
instructions later in this section.
Every fifty times the vehicle is
started and the navigation
system is turned on, the Caution
screen appears. After reading
the caution, select OK to load
the map DVD information.

Black plate (6,1)
Cadillac DTS Navigation System - 2011
6 Infotainment System
If OK is not selected, all control
buttons except for NAV (Navigation)
and DEST (Destination) can be
accessed. You can also press the
NAV control button to have this
Caution screen appear.
When getting started, set the
navigation system to your
preference or delete information you
may have entered using various
options.
Screen Shown with Map Disc Inserted

Black plate (7,1)
Cadillac DTS Navigation System - 2011
Infotainment System 7
A. Map DVD Slot
B. FULL MAP Touch Screen
Button
C. North Up/Heading Up Symbol
D. O(Power/Volume) Knob
E. No GPS Symbol
F. NAV (Navigation)
G. Straight Line to Distance
Symbol
H. DEST (Destination)
I. Map Scale
J. RPT (Repeat)
K. FAV (Favorite)
L. V(Zoom In) Touch Screen
Button
M. Mark Touch Screen Button
N. Source (AM, FM, XM
(if equipped))
O. CD/DVD Slot
P. Z(CD/DVD Video/Audio
Eject)
Q. Clock Touch Screen Button
R. f(Tune/Sound) Knob
S. AUDIO
T. MENU
U. ¨SEEK (Next)
V. U(Zoom Out) Touch Screen
Button
W. ©SEEK (Previous)
X. POI (Point of Interest) Touch
Screen Button
Y. Auxiliary Jack
Language —English/Metric
To change the language of the
navigation screens, see “DIC
Vehicle Customization”in the Index
of your vehicles owner manual.
To change the navigation screens
from English or metric, see “DIC
Operation and Displays”in the
Index of your vehicles owner
manual.
Deleting Personal Information
This navigation system can record
and store personal information such
as names and addresses. At times,
such as when you are disposing of
your vehicle, you may want to
delete this information. See “Edit
Address Book —Edit/View”under
Destination on page 37 for deleting
information from the address book.
Storing Radio Station Presets
To set preset radio stations, do the
following:
1. Press Oto turn the system on.
2. Press the AUDIO control button
and select the desired band
(AM, FM1, FM2, XM1, or XM2
(if equipped)).
3. Use the f(tune) knob or the
SEEK arrows to tune to the
desired station.

Black plate (8,1)
Cadillac DTS Navigation System - 2011
8 Infotainment System
4. Press and hold one of the
five preset screen buttons, at the
bottom of the screen, until you
hear a beep or see the station
displayed on the selected preset
button.
5. Repeat the steps for each
preset.
See “Storing Preset Stations”under
Destination on page 37 for more
information.
Setting the Clock
To set the time:
1. Press the clock screen button
located in the upper right corner
of the screen.
2. Press the Set screen button.
3. Press the Hours and Minutes ‐
and + signs to decrease and to
increase the time. See “Setting
the Clock”under Configure
Menu on page 49 for more
information.
Setting the Search Area,
Entering an Address and Point
of Interest, and Storing Preset
Destinations
Before entering an Address, Point
of Interest, Home, or Preset
Destination, select the appropriate
region that contains the final
destination. Your vehicle must be in
P (Park) to perform this operation.
Setting the Search Area
To set the search area:
1. If the radio is already on with
a map disc inserted, skip to
Step 5.
2. Press Oto turn the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 29 for more
information.
4. A caution may appear. Press the
OK screen button to proceed.
5. Press the DEST control button.
6. Press the Change Search Area
screen button.
7. Select the appropriate region
numbered screen button that
contains your final destination.
The system will return to the
Destination Entry menu. See
Destination on page 37 for more
information.
Entering an Address
If you are having trouble finding a
city or a street name, do the
following:
.Input the street name first
instead of the city name, or
vice versa.
.Input more characters or reduce
the amount of characters to
reduce or expand the available
options.

Black plate (9,1)
Cadillac DTS Navigation System - 2011
Infotainment System 9
To set a destination by entering a
city name, do the following:
1. If the radio is already on with a
map disc inserted, skip to
Step 5.
2. Press Oto turn the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 29 for more
information.
4. A caution may appear. Press the
OK screen button to proceed.
5. Press the DEST control button.
6. Press the 6Address Entry
screen button.
7. The City name category will
automatically be selected for
entry. Start entering the
city name.
If five or less names are
available for the entered
characters, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents the
number of available cities. Press
this button to view the list and
select a city.
8. Once a city is selected the street
name category will automatically
be selected for entry. Start
entering the street name.
Do not enter directional
information or street type, and
use the space symbol screen
button ( U) between street or
city names. Use the backspace
(q) screen button if an
incorrect character has been
entered.
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents the
number of available streets.
Select this button to view the list.
9. Select the street name with the
correct prefix from the list (Dr.,
Ln., St., etc.).
10. Once a street has been
selected, the numeric keyboard
will display, allowing you to
enter the house number. The
system will display the house
number range that is available
for the street.
11. Press the Go screen button.
A map screen, with the
destination marked, will appear.
12. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate and
highlight the route.
13. Press the Start screen button.
You are now ready to start your
route.
See “Address Entry”under
Destination on page 37 for more
information.

Black plate (10,1)
Cadillac DTS Navigation System - 2011
10 Infotainment System
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI), do the
following:
1. If the radio is already on with a
map disc inserted, skip to
Step 5.
2. Press Oto turn the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 29 for more
information.
4. A caution may appear. Press the
OK screen button to proceed.
5. Press the DEST control button.
6. Press the iPoint of Interest
screen button.
7. Enter the specific title of the POI
in the POI name space (e.g.
Washington Monument).
If five or less names are
available, a list will display.
If more than five are available,
there will be a screen button with
a number in it, it represents the
number of available POIs. Press
this button to view the list.
8. Press the Go screen button.
A map screen, with the
destination marked, will appear.
9. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate and
highlight the route.
10. Press the Start screen button.
You are now ready to start your
route.
See “Point of Interest (POI)”under
Destination on page 37 for more
information.
Storing Preset Destinations
1. If the radio is already on with a
map disc inserted, skip to
Step 5.
2. Press Oto turn the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 29 for more
information.
4. A caution may appear. Press the
OK screen button to proceed.
5. Press the DEST control button.
Enter a destination. See
Destination on page 37 for more
information on how to enter a
destination.
6. Press the Mark screen button
from the map screen to add the
current final destination as a
preset destination.
The address book screen will
appear.
7. Press the Name screen button.
An alpha-keyboard will display.
Enter the name.
8. Press and hold one of the
screen buttons at the bottom of
the screen until a pop-up
confirmation displays.
The name will appear in that
preset destination screen button
and is now available to select
from the Destination Entry
screen. See “Using Your Stored

Black plate (11,1)
Cadillac DTS Navigation System - 2011
Infotainment System 11
Preset Destinations”next in this
section to select it as a
destination.
See “Adding or Changing Preset
Destinations”under Destination
on page 37 for information on
how to add preset destinations.
Using Your Stored Preset
Destinations
These destinations are available for
selection while driving.
1. If the radio is already on with a
map disc inserted, skip to
Step 5.
2. Press Oto turn the system on.
3. Insert the DVD map disc. See
“Installing the Map DVD”under
Maps on page 29 for more
information.
4. A caution may appear. Press the
OK screen button to proceed.
5. Press the DEST control button.
6. Press one of the available preset
destination screen buttons.
A map screen, with the
destination marked, will appear.
7. Select the route preference
(Fastest, Shortest, or Other).
The system will calculate and
highlight the route.
8. Press the Start screen button.
You are now ready to start your
route.
See “Preset Destination”under
Destination on page 37 for more
information.
Canceling Guidance
Guidance will be canceled once you
arrive at your final destination. To
cancel guidance prior to arrival at
the final destination, do the
following:
1. Press the DEST control button.
2. Press the Cancel Guidance
screen button.
Guidance Volume
To adjust the volume of voice
guidance prompts, do the following:
1. Press the MENU control button
to enter the menu options, then
press the MENU control button
repeatedly until Nav is selected
or press the Nav screen button.
2. Press the >Voice Prompt
screen button.
3. Press the + or –screen buttons
to increase or to decrease the
volume of the voice prompts.
See “Voice Prompt”under Voice
Recognition on page 63 for more
information.
Cleaning the Display Screen
Use a soft clean cotton cloth
dampened with clean water.

Black plate (12,1)
Cadillac DTS Navigation System - 2011
12 Infotainment System
Radio
AM-FM Radio
Notice: Before adding any sound
equipment to the vehicle, such as
an audio system, CD player, CB
radio, mobile telephone,
or two-way radio, make sure that
it can be added by checking with
your dealer. Also, check federal
rules covering mobile radio and
telephone units. If sound
equipment can be added, it is
very important to do it properly.
Added sound equipment can
interfere with the operation of the
vehicle's engine, radio, or other
systems, and even damage them.
The vehicle's systems can
interfere with the operation of
sound equipment that has been
added.
Notice: The chime signals related
to safety belts, parking brake, and
other functions of the vehicle
operate through the navigation
system. If that equipment is
replaced or additional equipment
is added to the vehicle, the
chimes may not work. Make sure
that replacement or additional
equipment is compatible with the
vehicle before installing it. See
“Accessories and Modifications”
in the vehicle's owner manual.
Playing the Radio
O(Power/Volume): Press this
knob to turn the audio system on
and off. Turn the knob to increase or
to decrease the volume.
f(Tuning/Sound Knob): Turn this
knob to go to the next or previous
frequency. Press this knob to
display the Sound menu. See
“Sound Menu”later in this section.
AUDIO: Press to display the audio
screen. Press to switch between
AM, FM, or XM, if equipped, Disc,
or AUX (Auxiliary), or press the
screen button. See Using the
Navigation System on page 27,
or CD/DVD Player on page 18, and
Auxiliary Devices on page 27 for
more information.
Finding a Station
FM Source Shown, Other Sources
Similar
If viewing a map screen, press the
source screen (AM, FM, XM (if
equipped), CD, etc.) button. The
display will split between the audio
screen and the map screen. All
station-changing functions can be
performed from this screen.

Black plate (13,1)
Cadillac DTS Navigation System - 2011
Infotainment System 13
FM Source Shown, Other Sources
Similar
If you do not want to view a split
screen or you are not on a map
screen, press the AUDIO control
button.
AM/FM/XM: Press the source (AM,
FM, or XM, if equipped) screen
button or press the AUDIO control
button repeatedly until the desired
source is highlighted.
FM Source Shown, Other Sources
Similar
Category: Press the screen button,
located in the middle of the screen,
to receive a list of all of the selected
band stations in the area. Use the
up and down arrow screen buttons
to scroll the frequencies. Press the
desired frequency.
XM lists will also contain a category
to select and the stations or
channels that pertain to the
category. For XM, touch the left and
right arrow screen buttons to
change categories. The station
information will appear on the
display. See “Radio Menu”later in
this section to add and remove XM
categories from the category list.
When listening to XM stations, you
will be able to select all of the
categories when using the right and
left arrow screen buttons on the
main audio screen. The categories,
when removed, will not be enabled
to select from the category list
screen.
FM lists may contain a category to
select if stations in your area
support Radio Data Systems (RDS).
$Refresh List: Press this screen
button to refresh the list of stations.
When viewing a map screen, the
name of the station or channel
appears on the display.
¨SEEK / ©SEEK: To seek
stations, press the left or right arrow
to go to the next or previous station.
To scan stations, press and hold
either arrow for more than
two seconds. The radio goes to a

Black plate (14,1)
Cadillac DTS Navigation System - 2011
14 Infotainment System
station, plays for a few seconds,
then goes to the next station. To
stop scanning, press either arrow
again.
Storing Preset Stations
This feature allows storage of up to
30 preset stations. You can mix AM,
FM, and XM (if equipped). To store
presets:
1. Press Oto turn the system on.
2. If viewing a map screen, press
the source screen button, press
the AUDIO control button,
or press the FAV (favorite)
control button.
3. Select the band.
4. Seek, scan, or tune to the
desired station, to select the
station.
5. Press and hold one of the preset
screen buttons for more than
two seconds or until you hear
a beep.
6. Repeat the steps for each
preset.
Sound Menu
Digital Signal Processing (DSP)
Shown, Equalization Similar
f(Sound Menu): Press this knob
or press the MENU control button to
access the Sound menu to adjust
the treble, midrange, bass, fade,
balance, and equalization or Digital
Signal Processing (DSP), if the
vehicle has the Bose
®
sound
system.
Setting the Tone
TREBLE: Press the + or −sign to
increase or decrease the treble. If a
station is weak or noisy, decrease
the treble.
MID (Midrange): Press the + or −
sign to increase or decrease the
midrange.
BASS: Press the + or −sign to
increase or decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance): To
adjust the balance between the left
and the right speakers, press and
hold the L or R screen buttons. To
center the balance and the fade,
press the center, where the two
lines meet.
Front/Rear (Fade): To adjust the
fade between the front and the rear
speakers, press and hold the Front
or Rear screen buttons. To center
the balance and the fade, press the
center, where the two lines meet.

Black plate (15,1)
Cadillac DTS Navigation System - 2011
Infotainment System 15
Automatic Equalization
If the system has automatic
equalization, select customized
equalization settings designed for
Talk, Rock, Country, Pop, and
Classical. Press one of the
equalization screen buttons to hear
the change in sound. The system
saves separate settings for each
source.
To not use an automatic
equalization setting, press any of
the screen buttons that will change
the treble, midrange, bass, balance,
or fade. This takes the system out of
the equalization settings so that you
can create your own sound.
Digital Signal Processing (DSP)
If the system has the Bose
®
sound
system, the system has Digital
Signal Processing (DSP). DSP is
used to provide a choice of four
different listening experiences. DSP
can be used while listening to the
audio system. The type of DSP
selected is displayed on the
status line.
Select from the following DSP
settings for the AM-FM radio:
Normal: Press this screen button
to adjust the audio to be in normal
mode. This provides the best sound
quality or all seating positions.
Rear: Press this screen button to
adjust the audio to give the rear
seat occupants the best possible
sound quality.
Driver: Press this screen button to
adjust the audio to give the driver
the best possible sound quality.
Radio Menu
Press the MENU control button to
enter the menu screen, then press
the MENU control button repeatedly
until Radio is selected or press the
Radio screen button to make
changes for radio information
displayed or to limit features while
driving, number of preset pages,
and Automatic Volume Control or
Bose AudioPilot
®
.

Black plate (16,1)
Cadillac DTS Navigation System - 2011
16 Infotainment System
Limit Features While Driving
Press the Limit Features While
Driving screen button to turn on and
off the ability to limit functions while
driving. When this screen button is
highlighted, the following functions
are limited while driving:
.Music Navigator Scrolling
.Radio Category Scrolling
.Navigation Menu Scrolling and
some functions
See “Category”earlier in this
section for more information. See
“From Map”under Maps on page 29
for more information.
Number of Preset Pages
Press the /Number of Preset
Pages screen button to change
the number of preset pages,
1 through 6. Each preset page can
contain five preset stations. Press
the desired numbered screen
button.
Automatic Volume Control or
Bose AudioPilot
®
>Automatic Volume Control:
With automatic volume control, your
audio system adjusts automatically
to make up for road and wind noise
as you drive.
To use Automatic Volume Control:
1. Set the volume at the desired
level.
2. Press the MENU control button
to enter the menu screen, then
press the MENU control button
repeatedly until Radio is
selected or press the Radio
screen button
3. Press the >Automatic Volume
Control screen button.
4. Press the LOW, MEDIUM,
or HIGH screen buttons. Each
higher setting allows for more
compensation at faster vehicle
speeds.
Then, while driving, automatic
volume control automatically
increases the volume, as necessary,
to overcome noise at any speed.
The volume level should always
sound the same. To turn automatic
volume control off, press the OFF
screen button.
AudioPilot: If the system has the
Bose audio system, it includes Bose
AudioPilot noise compensation
technology.
To use AudioPilot:
1. Press the MENU control button
to enter the menu screen, then
press the MENU control button
repeatedly until Radio is
selected or press the Radio
screen button
2. Press the >Automatic Volume
Control screen button to access
the AudioPilot menu.
3. Press the ON screen button.

Black plate (17,1)
Cadillac DTS Navigation System - 2011
Infotainment System 17
To turn it off, press the OFF screen
button.
When on, AudioPilot continuously
adjusts the audio system
equalization, to compensate for
background noise, so that your
music always sounds the same at
the set volume level.
This feature is most effective at
lower volume settings where
background noise can affect how
well you hear the music being
played through your vehicle's audio
system. At higher volume settings,
where the music is much louder
than the background noise, there
may be little or no adjustments by
AudioPilot. For more information on
AudioPilot, visit www.bose.com/
audiopilot.
Radio Data System (RDS)
The audio system has a Radio Data
System (RDS). RDS features are
available for use only on FM
stations that broadcast RDS
information. With RDS, the radio
can do the following:
.Seek to stations broadcasting
the selected type of
programming
.Receive announcements
concerning local and national
emergencies
.Display messages from radio
stations
This system relies on receiving
specific information from these
stations and will only work when the
information is available. In rare
cases, a radio station may
broadcast incorrect information that
will cause the radio features to work
improperly. If this happens, contact
the radio station.
The RDS system is always on.
When information is broadcast from
the FM station you are listening to,
the station name or call letters will
be displayed on the audio screen.
RDS may provide a program type
(PTY) for current programming and
the name of the program being
broadcasted.
Satellite Radio
XM™Satellite Radio Service
XM™is a satellite radio service that
is based in the 48 contiguous United
States and 10 Canadian provinces.
XM™Satellite Radio has a wide
variety of programming and
commercial-free music,
coast-to-coast, and in digital-quality
sound. During your trial or when you
subscribe, you will get unlimited
access to XM™Radio Online for
when you are not in the vehicle.

Black plate (18,1)
Cadillac DTS Navigation System - 2011
18 Infotainment System
A service fee is required to receive
the XM™service. For more
information, contact XM™at
www.xmradio.com or call
1-800-929-2100 in the U.S. and
www.xmradio.ca or call
1-877-438-9677 in Canada.
When XM™is active, the channel
name and number, song title, and
artist will display on the screen.
XM™Radio Messages
See “XM™Radio Messages”in the
vehicle's owner manual”for a list of
possible XM messages.
Audio Players
CD/DVD Player
The player can be used for CDs,
CD-R, CD-RW, DVD-Video,
DVD-Audio, DVD-R/RW, DVD+R/
RW media along with MP3 and
un-protected WMA formats. See
“Playing an Audio CD”and “Playing
a DVD”after in this section for more
information.
With the ignition on, insert a disc
partway into the slot, label side up.
The player pulls it in and begins
playing.
The CD player can play the smaller
3 inch (8 cm) single CDs with an
adapter ring. Full-size CDs and the
smaller CDs are loaded in the same
manner.
While playing a CD, the navigation
system is available. If you insert a
CD with the system off and the
ignition on, it will start to play. As
each new track starts to play, the
track number appears on the
display.
If a CD error appears on the display,
see “CD/DVD Messages”later in
this section.
When a CD is inserted, the CD tab
displays.
If you turn off the ignition or radio
with a CD in the player, it stays in
the player. When you turn on the
ignition or radio, the CD starts
playing where it stopped, if it was
the last selected source.
If viewing a map screen, touch the
CD screen button. The display splits
between the audio screen and the
map screen. If you do not want to
view a split screen or you are not on
a map screen, press the AUDIO key
then press the AUDIO key until CD
is highlighted or touch the CD
screen button.

Black plate (19,1)
Cadillac DTS Navigation System - 2011
Infotainment System 19
Playing an Audio CD
j/r(Pause/Play): Press this
button to pause the CD. This button
will then change to the play button.
Touch the play button to play
the CD.
RANDOM: Press this button to
hear the tracks in random, rather
than sequential, order. Touch
RANDOM again to turn off
random play.
r(Rewind): Touch and hold this
button to rewind quickly through a
track selection. You will hear sound
at a reduced volume. Touch this
button again to stop rewinding. The
display will show the elapsed time of
the track.
[(Forward): Touch and hold this
button to fast forward quickly
through a track selection. You will
hear sound at a reduced volume.
Touch this button again to stop fast
forwarding. The display will show
the elapsed time of the track.
¨SEEK / ©SEEK: Press the right
arrow to go to the next track. Press
the left arrow to go to the start of the
current track, if more than
eight seconds have played. If either
arrow is pressed more than once,
the player will continue moving
backward or forward through the
CD. The sound will mute while
seeking.
You can also turn the tune knob to
seek to the next or previous track.
Z(Eject): Press this button to
eject a CD or DVD. If a CD or DVD
is ejected, but not removed, the
player will automatically pull it back
in after 15 seconds.
If loading and reading of a CD
cannot be completed, such as
unknown format, etc., and the disc
fails to eject, press and hold the CD
eject button for more than
five seconds to force the disc to
eject.
Playing a DVD
This feature will not operate unless
the vehicle is in P (Park).
The DVD player is only compatible
with DVDs of the appropriate region
code that is printed on the jacket of
most DVDs.
The DVD slot is compatible with
most audio CDs, CD-R, CD-RW,
DVD-Video, DVD-Audio, DVD-R/
RW, DVD+R/RW media along with
MP3 and un-protected WMA
formats.

Black plate (20,1)
Cadillac DTS Navigation System - 2011
20 Infotainment System
If an error appears on the display,
see “CD/DVD Messages”later in
this section.
There are three ways to play
a DVD:
.Once a DVD is inserted, the
system will automatically start
play of the DVD.
.If you are on a map screen,
touch the DVD screen button.
.Press the AUDIO hard key, then
touch the DVD screen button.
O(Power/Volume): Press to turn
the system on and off. Turn to
increase or decrease the volume of
the audio system.
DVD Menu Options
Once a DVD starts to play, the
menu options will automatically
appear. To display the menu
choices while a DVD is playing in
full screen, press anywhere on the
screen.
There are three pages of menu
options. Press the right and left
arrow screen buttons to use all of
the menu screen buttons. Menu
options are available when they are
highlighted. Some menu options are
only available when the DVD is not
playing.
Full: Press this screen button to
remove all menu options from the
display. Press anywhere on the
screen to display the menu options.
Cursor: Press this button to
access the cursor menu. The arrows
and other cursor options allow you
to navigate the DVD menu options.
The cursor menu options are only
available if a DVD has a menu.
q,Q,r,R(Arrow Buttons):
Use these arrow buttons to move
around the DVD menu.
Enter: Press this button to select
the highlighted option.
Return: Press this button to go
back to the previous DVD menu.
Back: Press this button to go back
to the main DVD display screen.
Move: Press this button to move
the cursor buttons back and forth
from the bottom-right corner to the
top-left corner of the screen.
j/r(Pause/Play): Press this
button to pause the DVD. This
button will then change to the play
button. Press the play button to play
the DVD.