Calfarme ASDW-950 User manual

Quality Consumable Refills from Calfarme
CALFARME manufactures a wide range of quality
consumable refills for filling into the refillable cartridge
of both Press Type and Autosoap Dispensers:
■ECOBATH 3-in-1 Soap
■Moisturizing Shower Creme
■Enriched Lotion soap
■Antimicrobial
Lotion Soap
■Instant Hand
Sanitizer
■General Purpose
Handsoap
■Heavy Duty
Hand Cleaner
■Dishwashing
Liquid
CONSUMABLE REFILLS
Both Press Type and Autosoap Dispensers can deliver
liquid soap from the standard refillable cartridge or
from a sealed 1000 ml SOAP-IN-BAG also available
from CALFARME.
SOAP-IN-BAG comes with liquid soap in a strong
plastic bag which is hermetically sealed, and is fitted
with a tube and nozzle assembly.
SOAP-IN-BAG provides the extra hygiene
assurance, and is disposable once the soap is used up.
SOAP-IN-BAG
Manufactured by Calfarme (Singapore) Pte Ltd
Blk 2 Defu Lane 10 #02-535 Singapore 539183.
Tel: [phone] Fax: [phone]
www.calfarme.com
CAT. NO: G0303 © 2002 CALFARME (SINGAPORE) PTE LTD
No touch, infrared sensor
soap dispenser with manual
option.
Models:
■ASDW-950
(White Cover)
■ASDT-950
(Smoke Grey
Transparent Cover)
General purpose,
manual press type soap
dispenser
Models:
■SDW-1000
(White Cover)
■SDT-1000
(Smoke Grey
Transparent Cover)
AUTOSOAP DISPENSER
PRESS TYPE SOAP DISPENSER
Practical, Well-Designed
and Durable Soap Dispenser
Practical, Well-Designed
and Durable Soap Dispenser
ISO 9002 CERTIFIED

SPECIFICATIONS
External Dimension : 24cm (H) x 14cm (W) x 9cm (D)
Max.Power Supply : 3 “C”cell batteries
Max. Capacity : 1000 ml
Detecting Distance : Preset at 10cm, 2-20cm Adjustable
Response Time : 1.2 seconds
Battery Life : 2–3 months or 10,000 usage
(installed at least 30cm above basin)
Installation Instructions
ALOCKING SLOT
BREFILLABLE
CARTRIDGE
CSENSITIVITY
RANGE SWITCH
(Turn clockwise to
prolong the detecting
distance and
counterclockwise to
shorten)
DSAFETY SWITCH
ECYCLINDER
ARM
FINFRARED
SENSOR
COMPARTMENT
GSENSOR
MIRROR
HDETACHABLE
BATTERY
COVER
IBATTERY
COMPARTMENT
(3 C cells)
JHINGED COVER
■Be sure to clean wall surface
well to remove grease and
dirt prior to mounting.
■Remove protective backing
from adhesive tape on back
of Autosoap Dispenser.
■Carefully position Autosoap
Dispenser and firmly press
against the mounting surface
for at least 10 seconds.
■Open cover and press
directly on back plate for an
additional 10 seconds.
1. TAPE MOUNTING
■Drill holes at a proper
position on mounting
surface.
■Insert wall plugs and use
screws to secure Autosoap
Dispenser permanently on
the wall.
2. PERMANENT SCREW
MOUNTING (optional)
Operating Instructions
1. Open Autosoap Dispenser by inserting key
opener into the top locking slot (part A) and pull
cover forward. The cover is hinged as illustrated
(part J). To clean the cover, simply remove from
hinges and wash in warm water with a little of
soap.
2. Insert 3 ‘C’ cell batteries (part 1) into the battery
compartment on the right side of the detachable
mechanism after removing battery cover.
3. Place a soap cartridge bottle or soap bag on top
of the detachable mechanism and fix tube from
soap cartridge or bag firmly in position before
closing the cover.
4. Close cover which will press on the safety switch
(part D) to activate the dispenser automatically.
5. Place hand beneath the dispenser and allow 1-2
seconds for response for each drop of soap.
6. If more soap is desired, repeat above action (5).
(installed at least 30cm above basin)
Infrared Sensor Battery Operated
AUTOSOAP DISPENSERAUTOSOAP DISPENSERAUTOSOAP DISPENSER