Calibre 9011/ Z000 User manual

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 1/12
9011/ Z000 Definitive User manual

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 2/12
MAIN
Push the rown to hange Mode.
TIME 1
TIME 2
ALARM
CHRON
O

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 3/12
SYNCHRONIZING HE HANDS
From ea h mode, push the rown at least 3 se onds. Movement is going into syn h mode for adjust and syn hronize the hands position.
Push A Push B Push the rown to get out
Hours hand is running Minute hand is running

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 4/12
IME 1 FUNC ION
Actions:
A: Ex hange Lo al USA ities: New York, Chi ago, Denver, Los Angles. (Only in USA Version else not used)
A 1 se ond: Not used
B: Change Hands position (LCD viewing for 20 se onds or Time 1)
B 1 se ond: Time 1, Date and parameters setting
A + B: Not used
Date
Hands pla ed at Time1

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 5/12
o set ime 1, Date and parameters, pull the crown from each mode or press at least 1 second on B from ime 1 mode, hands
are place in LCD viewing mode. (In USA Version instead of IME 1 : ES , CS , MS or PS following local time set)
Note: To go out this mode: If B was pushed push the rown from any step or wait for 5 se onds or from “PARAM” push B.
If rown was pulled, push it.
A
B
B
A
A
Hours
setting
Minutes
setting
Se onds
resetting
Day
setting
Month
setting
Year
setting

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 6/12
IME 2 FUNC ION
Actions:
A: Not used
A 1 se ond: Not used
B: Change Hands position (LCD viewing for 20 se onds or Time 1)
B 1 se ond: Time 2 setting
A + B: Voyager Fun tion
Date
Hands pla ed at Time1

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 7/12
o adjust ime 2 push B at least 1 second, hands are place in LCD viewing mode.
To go out of setting mode qui kly, push the rown, else wait for 5 se onds.
Out of setting
mode
Minutes
setting
(only by half hour)
Hour
setting

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 8/12
ALARM FUNC ION
Actions:
A: Change alarm status and pla e hands in LCD viewing mode
A 1 se ond: Not used
B: Change Hands position (LCD viewing for 20 se onds or Time 1)
B 1 se ond: Alarm setting
A + B: Not used
Hands pla ed
in LCD viewing mode
Alarm status
Date

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 9/12
o adjust Alarm push B at least 1 second, hands are place in LCD viewing mode.
To go out of setting mode qui kly, push the rown, else wait for 5 se onds.
Out of setting
mode

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 10/12
CHRONO FUNC ION
Actions:
Ea h a tion pla e hands in LCD viewing mode for 20 se onds
Read des ription down
Hands pla ed
in LCD viewing mode
Date

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 11/12
1. Measure of elapsed time
Push on A to start the hrono. Push on A to stop the hrono, display sows the elapsed time.
Push on B to reset the hrono.
2. Measure of cumulated time
Same operations as 1. but repla e “push on B” by push on A to restart the hrono
3. Reading of a partial time when chrono display is frozen
Push on A to start the hrono.
Push on B to freeze the display.
Push on B to defreeze the display that gives again the time really elapsed.
4. Measure of a second time
This operation is a ombination of the pre eding points:
Push on A to start the hrono
Push on B to freeze the display (The hrono still ount)
Push on A to stop the hrono (pi tograms don’t blink be ause hrono is stop)
Push on B to defreeze the display: display gives the time elapsed at the moment of hrono stop.
Push on B to reset the hrono

Calibre 9011/Z000 DEFINITIVE USER MANUAL
22/11/2010 Page 12/12
LOW BA ERY
When Low battery is dete ted all fun tions are disabled, hands are pla ed at 12h00.
Batt blinks.
If Alarm was ON it will not be disabled until ring.