1. Self test when power on
When the receiver display is power on, it starts initialization program. The screen shows the digits
from 000 to 999 along with the prompt sound “Initialization... please wait”.
2. Function settings
At first time use, please do the settings as below. After all the settings are finished, please power off
the host and reboot it.
Press [SET] button to enter the first class settings menu. Then press “UP/DOWN” button to select
the menu from “--1" to “-12". And press [SET] button to enter submenu.
(1) --1: Pairing call buttons
Before do the pairing, please turn to "--6" to set key switch setting and "-10" to set the working
mode, for example, 999 number mode or 99b number+function mode.
Press [SET] button to enter "--1" submenu. The display will show "001", then press [UP/DOWN] to
select the call button number.
1) 999 mode paring method
Press [UP/DOWN] button to select one number from 001 to 999, for example “001”, and then press
any button on the call button, the speaker will sound “successful registration” and the display screen
turn to next number “002” automatically. Then you can continue to do pairing of other call buttons.
2) Area mode paring method
In area mode, the first digit of three is the area, it can show "A/b/C/d/E/F" areas, the last two digits
means the number from 01 to 99 in one area, press [UP/DOWN] button to select suitable area and
number.
3) 99 mode paring method
Press [UP/DOWN] button to select one number from 1 to 99, for example “001”, and then press any
button on the call button, the speaker will sound “successful registration” and the display screen turn to
next number “002” automatically. Then you can continue to do pairing of other call buttons.
4) keypad paring method
In key switch setting, select “005”, it is special for keypad call button mode.
The turn back to “--1” pairing setting, the display shows “001”, then press any button on the keypad
, the receiver will get it and prompt “pairing successful, please continue.” and the display will turn to
"002". That means all the 999 numbers are paired.
Note: the receiver can pair 3 keypad in maximum.
(2) --2: Pair management controller
Press [SET] button to enter "--2" submenu. The display will show "001", then press the button on
management controller, the receiver will get it and prompt "pairing successful, please
continue." and the display will turn to "002". That means the pairing is finished.
After paired the management controller, use the controller button [SET/BACK/UP/DOWN] to
replace the receiver settings button.
Note: the receiver can pair 3 manager controller in maximum. If you pair the fourth one, it
will cover the last one.
(3) --3: Delete management controller
Press [SET] button to enter "--3" submenu. The display will show "001", press [UP/DOWN] button
to select which controller will be deleted, then press [DEL] button to delete. The receiver will prompt
"Dingdong" voice which means the deleting is finished.
Operation
--5--
