Calsense ET2000 Manual

® WIND GAGE SETUP
making
since 1986
water work
WIND GAGE
ET2000 (400 SERIES) WIND GAGE
1
10 9
8
4
8
5
6
7
3
2
1STOP – The STOP key will stop any currently
running Scheduled watering Cycle, Manual
Cycle, Test Cycle, Manual Special Sequence.
2MANUAL – The MANUAL key will perform
Manual Water, Test, Master Valve Override and
Manual Special Sequence.
3NO WATER – The NO WATER key will turn the
controller Off and set No Water Days.
4?– The ? key is used to access the controller
Help screens.
5ENGLISH / ESPANOL – The ENGLISH /
ESPANOL key allows you to toggle the displayed
text between English and Spanish.
6BACK – The BACK key will go back to the
previous screen.
7MAIN MENU – The MAIN MENU key is used to
access the different program features of the
controller.
8MENU KEYS – MENU keys select the different
features of commands in the different screens
and are adjacent to the left and right side of the
controller’s display screen. The text in the screen
will point towards the MENU key that needs to
be pressed.
9LEFT / RIGHT ARROW KEYS – The LEFT /
RIGHT ARROW keys move the highlighted
cursor around the different screens when setting
up or editing the controller’s features and
options.
10 PLUS / MINUS KEYS – The PLUS / MINUS
keys increase or decrease values or answer Yes
or No questions in the different screens.

WIND GAGE SETUP ®
making
since 1986
water work
WIND GAGE
1. Press the MAIN MENU key.
2. Press the WEATHER menu key
(Figure 1).
Setup Status
Flow Radio Remote
Weather Reports
CALSENSE WATER MANAGEMENT SYSTEM
Programs & Stations Lights
Figure 1
The WEATHER SETUP screen (Figure 2).
Rain Switch
Wind Gage Moisture
Rain Bucket Budget
WEATHER SETUP
ET Gage ET
Figure 2
3. Press the WIND GAGE Menu
key.
The WIND GAGE SETUP screen (Figure 3).
WIND GAGE ? NO
WIND GAGE SETUP
Is controller Wired to a
Figure 3
The default setting is NO. If you are currently using a
wind gage on this controller then change the setting
to YES.
4. Press the PLUS or MINUS keys to
change the settings.
The WIND GAGE SETUP screen will change to
reveal the irrigation wind settings (Figure 4).
WIND GAGE ? YES
Pause Irrigation when wind is at
15 MPH for 10 minutes
15 MPH for 10 minutes
Resume Irrigation when wind drops to
WIND GAGE SETUP
Is controller Wired to a
Figure 4
5. Press the blue ARROW key to
move the cursor to the next
entry.
WIND GAGE ? YES
15 MPH for 10 minutes
Pause Irrigation when wind is at
15 MPH for 10 minutes
Resume Irrigation when wind drops to
WIND GAGE SETUP
Is controller Wired to a
Figure 5
To change the Miles Per Hour that you want the
irrigation to pause at,
6. Press the PLUS or MINUS key
(Figure 5).
7. Press the blue ARROW key to
move the cursor to the next entry.
To set the wind sustained time that you want the
controller to check for,

® WIND GAGE SETUP
making
since 1986
water work
8. Press the PLUS or MINUS key
(Figure 6).
WIND GAGE ? YES
15 MPH for 10 minutes
Pause Irrigation when wind is at
15 MPH for 10 minutes
Resume Irrigation when wind drops to
WIND GAGE SETUP
Is controller Wired to a
Figure 6
9. Press the blue ARROW key to
move the cursor to the next entry.
To set the Miles Per Hour that you want the
controller to resume irrigation at,
10. Press the PLUS or MINUS key
(Figure 7).
WIND GAGE ? YES
15 MPH for 10 minutes
12 MPH for 10 minutes
Pause Irrigation when wind is at
Resume Irrigation when wind drops to
WIND GAGE SETUP
Is controller Wired to a
Figure 7
11. Press the blue ARROW key to
move the cursor to the next entry.
To set the wind sustained time that you want the
controller to check for prior to resuming irrigation,
12. Press the PLUS or MINUS key
(Figure 8).
WIND GAGE ? YES
15 MPH for 10 minutes
12 MPH for 10 minutes
Pause Irrigation when wind is at
Resume Irrigation when wind drops to
WIND GAGE SETUP
Is controller Wired to a
Figure 8
13. Press the MAIN MENU key to
return to the MAIN MENU screen
(Figure 1).

WIND GAGE SETUP ®
making
since 1986
water work
®
2075 Corte del Nogal, Suite P, Carlsbad CA 92011
1-(800)-572-8608 FAX: [phone]
www.calsense.com
Stock Number: PG1-WG-D2 Rev. 03/06