Calspas ESCAPE User manual

1
OWNER’S MANUAL
| ESCAPE & PLATINUM |

Congratulations! You are now the owner of the finest spa built. Now you will experience true comfort and
relaxation as you never had before. We at Cal Spas® focus on quality, design and comfort in order to create a
truly luxurious experience like no other.
Welcome to the Cal Spas® family.
It is important that you register your Cal Spas product as soon as possible. By taking just a few quick minutes to
register, you can enjoy product alerts, more eicient support, and quicker service. Go to https://calspas.com/
register-your-spa.php. Fill in your information and click “SEND WARRANTY INFO”.
Locating the product serial number
The serial number of your spa is located on a metal plate attached to the right side of the spa panel. You will
need this number to properly register your spa and activate coverage. Write this information in the space
provided below.
Spa Model: ____________________________________________________________________
Spa Serial Number: ______________________________________________________________
Date Purchased: ________________________________________________________________
Date Installed: __________________________________________________________________
Dealer’s Phone Number: __________________________________________________________
Dealer’s Address: _______________________________________________________________
CONTACT INFORMATION
For customer service, please contact
your authorized dealer immediately. If
you need additional information and/or
assistance, contact:
LMS Customer Service Department
1462 East Ninth Street
Pomona, CA 91766.
Toll Free: 1-800-CAL-SPAS
Fax: [phone]
Copyright 2021 LMS. All rights reserved. Duplication without written consent is
strictly prohibited.
Cal Spas®, Adjustable Therapy System™, ATS™, Cal Premium™, Cal Select™, Cal Stone™,
XL™ Heater, and Ultimate Fitness Spa Series™ are registered trademarks.
Due to continuous improvement programs, all models, operation, and/or
specifications are subject to change without prior notice.
LTR20221010, Rev. A
10/19/2021

1. IMPORTANT SAFETY INSTRUCTIONS ......................................................................................................3
2. Preparing for Your New Portable SpaPreparing for Your New Portable Spa .....................................................................................................5
2.1 Planning the Best Location2.1 Planning the Best Location ............................................................................................................................................................................5
2.2 Preparing a Good Foundation2.2 Preparing a Good Foundation .......................................................................................................................................................................6
2.3 240 Volt Electrical Installation2.3 240 Volt Electrical Installation .......................................................................................................................................................................6
2.4 2.4 GFCI Wiring Diagram for US and CanadaGFCI Wiring Diagram for US and Canada ....................................................................................................................................................7
2.5 Testing the GFCI Breaker2.5 Testing the GFCI Breaker ................................................................................................................................................................................7
2.6 GFCI Wiring Diagram for Europe2.6 GFCI Wiring Diagram for Europe ................................................................................................................................................................... ...................................................................................................................................................................88
2.7 Filling and Powering Up your Portable Spa2.7 Filling and Powering Up your Portable Spa ................................................................................................................................................ ................................................................................................................................................99
2.8 Priming the Pump2.8 Priming the Pump .......................................................................................................................................................................................... ..........................................................................................................................................................................................1111
3. 3. Operating Your SpaOperating Your Spa .............................................................................................................................................12
3.1 3.1 spaTouch Icon Driven Control PanelspaTouch Icon Driven Control Panel .........................................................................................................................................................12
3.2 Changing Languages for the Display3.2 Changing Languages for the Display..........................................................................................................................................................12
3.3 Screen Navigation and Options3.3 Screen Navigation and Options ..................................................................................................................................................................14
3.4 3.4 spaTouch3 Icon Driven Control PanelspaTouch3 Icon Driven Control Panel ........................................................................................................................................................28
3.5 3.5 Connecting to a Device or NetworkConnecting to a Device or Network ............................................................................................................................................................58
3.6 Operating the Balboa Wi-Fi App..................................................................................................................................................................59
3.7 3.7 Electrical Power EiciencyElectrical Power Eiciency ...........................................................................................................................................................................61
3.8 Jets3.8 Jets .................................................................................................................................................................................................................... ....................................................................................................................................................................................................................6161
3.9 LED Lighting3.9 LED Lighting .................................................................................................................................................................................................... ....................................................................................................................................................................................................6161
3.10 Diverter Knobs3.10 Diverter Knobs .............................................................................................................................................................................................. ..............................................................................................................................................................................................6262
3.11 Air Venturis3.11 Air Venturis .................................................................................................................................................................................................... ....................................................................................................................................................................................................6262
3.12 Waterfalls3.12 Waterfalls ....................................................................................................................................................................................................... .......................................................................................................................................................................................................6262
3.13 ATS Plus Therapy System3.13 ATS Plus Therapy System ........................................................................................................................................................................... ...........................................................................................................................................................................6363
4. 4. Water ClarityWater Clarity .............................................................................................................................................................64
4.1 4.1 The Key to Clear WaterThe Key to Clear Water ..................................................................................................................................................................................64
4.2 Testing and Adjusting Spa Water ................................................................................................................................................................65
4.3 4.3 SanitizationSanitization .....................................................................................................................................................................................................66
4.4 Bather Load4.4 Bather Load .....................................................................................................................................................................................................67
4.5 Filter Cleaning .................................................................................................................................................................................................67
4.6 Ozonator ..........................................................................................................................................................................................................67
4.7 Maintenance Schedule .................................................................................................................................................................................68
4.8 Troubleshooting Water Clarity Problems ..................................................................................................................................................68
5. 5. Cleaning and MaintenanceCleaning and Maintenance ...........................................................................................................................70
5.1 5.1 Removing and Re-seating the PillowsRemoving and Re-seating the Pillows ....................................................................................................................................................... .......................................................................................................................................................7070
5.2 Jet Removal and Replacement5.2 Jet Removal and Replacement ................................................................................................................................................................... ...................................................................................................................................................................7070
5.3 Spa Cover and Locking System Installation5.3 Spa Cover and Locking System Installation ............................................................................................................................................. .............................................................................................................................................7171
5.4 Draining Your Portable Spa5.4 Draining Your Portable Spa .......................................................................................................................................................................... ..........................................................................................................................................................................7373
5.5 Winterizing (Cold Climate Draining)5.5 Winterizing (Cold Climate Draining) ........................................................................................................................................................... ...........................................................................................................................................................7474
5.6 Cleaning and Replacing the Filter5.6 Cleaning and Replacing the Filter ............................................................................................................................................................... ...............................................................................................................................................................7474
5..7 Vacation Care5..7 Vacation Care ................................................................................................................................................................................................. .................................................................................................................................................................................................7474
5.8 Cleaning Your Spa5.8 Cleaning Your Spa .......................................................................................................................................................................................... ..........................................................................................................................................................................................7575
5.9 Using the Freedom Sound System5.9 Using the Freedom Sound System ............................................................................................................................................................. .............................................................................................................................................................7575
6. Appendix ....................................................................................................................................................................76
Replacement Parts ...............................................................................................................................................................................................76
Basic Troubleshooting ........................................................................................................................................................................................83
“Thermal Creep” ...................................................................................................................................................................................................85
Table of Contents

3
1.IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY!
When using installing and using this spa, basic safety precautions should always be followed, including:
1. DANGER: RISK OF SEVERE INJURY OR DROWNING!
• DO NOT allow children to be in or around a spa unless a responsible adult supervises them.
• Keep the spa cover on and locked when not in use.
• See instructions enclosed with your cover for locking procedures.
2. DANGER: RISK OF SEVERE INJURY OR DROWNING!
• The suction fittings in this spa are sized to match the specific water flow created by the pump. Should the
need arise to replace the suction fittings, or the pump be sure the flow rates are compatible.
• Never operate the spa if the suction fitting or filter baskets are broken or missing. Never replace a suction
fitting with one that is rated less than the flow rate marked on the original suction fitting.
3. DANGER: RISK OF SEVERE INJURY FROM ELECTRIC SHOCK OR DEATH FROM ELECTROCUTION!
• Install the spa at least 5 feet (1.5 meters) from all metal surfaces. As an alternative, a spa may be installed
within 5 feet (1.5 meters) of metal surfaces if each metal surface is permanently bonded by a minimum #8
AWG solid copper conductor to the outside of the spa’s control box.
• DO NOT permit any external electrical appliances, such as lights, telephones, radios, televisions, and etc.,
within 5 feet (1.5 meters) of the spa. Never attempt to operate any electrical device from inside the spa.
• Replace a damaged power cord immediately.
• DO NOT bury the power cord.
• Connect to a grounded, grounding-type receptacle only.
4. WARNING: RISK OF HYPERTHERMIA (OVER-HEATING) CAUSING SEVERE INJURY, BURNS, WELTS
OR DEATH!
• Water temperature in excess of 104°F (40°C) may be injurious to your health.
• The spa water should never exceed 104°F (40°C). Water temperatures between 100°F (38°C) and 104° F (40°C)
are considered safe for a healthy adult.
• Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes.
• Before using the spa, the user should measure the water temperature since the tolerance of water
temperature-regulating devices varies.
5. WARNING: To reduce risk of injury
• Prolonged exposure to hot air or water can induce hyperthermia. Hyperthermia occurs when the internal
temperature of the body reaches a level between 3°F (2°C) to 6°F (4°C) above the normal body temperature
of 98.6°F (37°C). While hyperthermia has many health benefits, it is important not to allow you body;s core
temperature to rise above 103°F(39.5°C).
• High water temperatures have a high potential for causing fetal damage during pregnancy. Women who are
pregnant, or think they are pregnant should always check with their physician prior to spa usage.
• The use of alcohol, drugs or medication before or during spa use may lead to unconsciousness, with the
possibility of drowning.

4
• Persons suffering from obesity, a medical history of heart disease, low or high blood pressure, circulatory
system problems or diabetes should consult a physician before using the spa.
• Persons using medications should consult a physician before using the spa since some medications may
induce drowsiness while others may affect heart rate, blood pressure and circulation.
6. Hyperthermia
• Symptoms of excessive hyperthermia include dizziness, lethargy, drowsiness and fainting. The eects of
excessive hyperthermia may include:
ط Failure to perceive heat
ط Failure to recognize the need to exit spa or hot tub
ط Unawareness of impending hazard
ط Fetal damage in pregnant women
ط Physical inability to exit spa
ط Unconsciousness
WARNING: The use of alcohol drugs or medication can greatly increase the risk of fatal hyperthermia.
7. WARNING:
• This product is provided with a ground-fault circuit-interrupter in the spa control box. The GFCI must be
tested before each use. With the product operating open the service door. When the product stops operating
this merely indicates that the door is equipped with an electrical interlock. Next, push the test button on
the GFCI and close the service door. The product should now operate normally. When the product fails
to operate in this manner, there is a ground current flowing indicating the possibility of an electric shock.
Disconnect the power until the fault has been identified and corrected.
8. DANGER: RISK OF ELECTRIC SHOCK
• Do not permit any electric appliance, such as a light, telephone, radio, or television within 5 feet (1.5m) of a
spa.
9. WARNING: people with infectious diseases should not use a spa or hot tub.
10. WARNING: to avoid injury exercise care when entering or exiting the spa or hot tub.
1 1. WARNING: Do not use spa or hot tub immediately following strenuous exercise.
12. WARNING: Prolonged immersion in a spa or hot tub may be injurious to your health.
13. CAUTION: Maintain water chemistry in accordance with manufacturer’s instructions.
SAVE THESE INSTRUCTIONS.

5
Before Delivery
☐Plan your delivery route
☐Choose a suitable location for the spa
☐Lay a 5-8 cm concrete slab
☐Install dedicated electric supply
Aer Delivery
☐Place spa on Slab
☐Connect electrical components
2. Preparing for Your New Portable Spa2. Preparing for Your New Portable Spa
Pre-Delivery Checklist
Most cities and counties require permits for
exterior construction and electrical circuits.
In addition, some communities have codes
requiring residential barriers such as fencing
and/or self-closing gates on property to prevent
unsupervised access to the property by children.
Your dealer can provide information on which
permits may be required and how to obtain them
prior to the delivery of the spa.
Safety First
Do not place your spa within 10 feet (3m) of
overhead power lines.
Consider How You Will Use Your Spa
How you intend to use your spa will help you
determine where you should position it. For
Example, will you use your spa for recreational
or therapeutic purposes? If your spa is mainly
used for family recreation be sure to leave plenty
of room around it for activity. If you will use it for
relaxation and therapy, you will probably want to
create a specific mood around it.
Plan for Your Environment
If you live in a region where it snows in the winter
or rains frequently, place the spa near a house
entry. By doing this, you will have a place to
change clothes and not be uncomfortable.
2.1 Planning the Best Location2.1 Planning the Best Location
Consider Your Privacy
In a cold-weather climate, bare trees won’t
provide much privacy. Think of your spa’s
surroundings during all seasons to determine
your best privacy options. Consider the view
of your neighbors as well when you plan the
location of your spa.
Provide a View with Your Spa
Think about the direction you will be facing
when sitting in your spa. Do you have a special
landscaped area in your hard that you find
enjoyable? Perhaps there is an area that catches a
soothing breeze during the day or a lovely sunset
in the evening.
Keep Your Spa Clean
In planning your spa’s location, consider a
location where the path to and from the house
can be kept clean and free of debris.
Prevent dirt and contaminants from being tracked
into your spa by placing a foot mat at the spa’s
entrance where the bathers can clean their feet
before entering your spa.
Allow for Service Access
Make sure the spa is positioned so that access to
the equipment compartment and all side panels
will not be blocked.
Many people choose to install a decorative
structure around their spa. If you are installing
your spa with any type of structure on the
outside, such as a gazebo, remember to allow
access for service. It is always best to design
special installations so that the spa can still be
moved, or lied o the ground.

6
2.2 Preparing a Good Foundation2.2 Preparing a Good Foundation
NOTE: We strongly recommend that a qualified, licensed contractor prepare the foundation for your spa.
Damage caused by inadequate or improper foundation support is not covered by the warranty. It is the
responsibility of the spa owner to provide a proper foundation for the spa.
Your spa needs a solid and level foundation. The area that it sits on must be able to support the weight of the
spa, with water and occupants who use it. If the foundation is inadequate, it may shi or settle aer the spa is in
place, causing stress that could DAMAGE YOUR SPA SHELL AND FINISH.
Place the spa on an elevated 3 to 4” / 30
cm concrete slab. Pavers, gravel, brick, sand, timbers or dirt foundations are
not adequate to support the spa.
If you are installing the spa indoors, pay close attention to the flooring beneath it. Choose flooring that will not
be damaged or stained. If you are installing your spa on an elevated wood deck or other structure, it is highly
recommended that you consult a structural engineer or contractor to ensure the structure will support the
weight of 150 lbs per square foot (732 Kg/m2).
2.3 240 Volt Electrical Installation2.3 240 Volt Electrical Installation
NOTE: These instructions describe the only acceptable electrical wiring procedure. Spas wired in any other
way will void your warranty and may result in serious injury. The electrical circuit must be installed by an
electrical contractor and approved by a local building or electrical inspector. Failure to comply with state
and local codes may result in a fire or personal injury and will be the sole responsibility of the spa owner.
All 240V spas must be permanently connected (hard wired) to the power supply. When installed in the United
States, the electrical wiring of this spa must meet the requirements of the NEC 70 and any applicable local, state,
and federal codes. The power supplied to the spa must be on a dedicated GFCI protected circuit as required by
NEC 70 with no other appliances or lights sharing the power. Use copper wire with THHN insulation. DO not use
aluminum wire. Use the table on the next page to determine your GFCI and wiring requirements. Wires that run
over 100 feet must increase wire gauge to the next lower number. For example: A normal 50 amp GFCI with four
#6 AWG copper wires that run over 100 feet would require you to go to four #4 AWG copper wires.

7
2.4 GFCI Wiring Diagram for US and Canada2.4 GFCI Wiring Diagram for US and Canada
House Breaker Box
GREEN (Ground)
WHITE
(Neutral)
RED (Hot)
BLACK (Hot)
GFCI Breaker Box
Spa Control Box
WHITE
Front View of GFCI
GREEN (Ground)
RED
(Hot)
WHITE (Neutral)
WHITE (Load Neutral)
BLACK
(Hot)
BLACK (Load Hot)
RED (Load Hot)
Bottom View of GFCI
WHITE
BLACK (HOT)
RED (HOT)
WHITE
(LOAD NEUTRAL)
One 220V circuit breaker
One GFCI
Four wires:
Red (hot)
Black (hot)
White (neutral)
Green (ground)
CIRCUIT BOARD
WHITE
(NEUTRAL)
BLACK (HOT)
RED (HOT)
GREEN
(GROUND)
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
BP501G1 and BP501X control boxes
WHITE
(NEUTRAL)
BLACK (HOT)
RED (HOT)
GREEN
(GROUND)
CIRCUIT BOARD
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
BP20X control box
House Breaker Box
GREEN (Ground)
WHITE
(Neutral)
BLACK
(Hot)
BLACK
(Hot)
RED
(Hot)
RED
(Hot)
GFCI Breaker Box
Front View of GFCI
Bottom View of GFCI
WHITE
BLACK (HOT)
RED (HOT)
WHITE
(LOAD NEUTRAL)
WHITE
GREEN (Ground)
RED
(Hot)
WHITE (Neutral)
WHITE (Load Neutral)
BLACK
(Hot)
BLACK (Load Hot)
RED (Load Hot)
WHITE
GREEN (Ground)
RED
(Hot)
WHITE (Neutral)
WHITE (Load Neutral)
BLACK
(Hot)
BLACK (Load Hot)
RED (Load Hot)
Spa Control Box
CIRCUIT BOARD
WHITE
(NEUTRAL)
BLACK (HOT)
RED (HOT)
GREEN
(GROUND)
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
BP501G1 and BP501X control
boxes and Auxiliary Heater
WHITE
(NEUTRAL)
BLACK (HOT)
RED (HOT)
GREEN
(GROUND)
CIRCUIT BOARD
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
BP20X control box
SPA SIDE
SWIM SIDE
Control
Box
Auxiliary
Heater
Control
Box
Two 220V circuit breakers
Two GFCIs
Seven wires:
Two Red (hot)
Two Black (hot)
Two White (neutral)
One Green (ground)
House Breaker Box
GREEN (Ground)
WHITE (Neutral)
BLACK
(Hot)
BLACK
(Hot)
RED
(Hot)
BLACK
(Hot)
RED
(Hot)
RED
(Hot)
Three 220V circuit breakers
Three GFCIs
Ten wires:
Three Red (hot)
Three Black (hot)
Three White (neutral)
One Green (ground)
WHITE
RED
(Hot)
WHITE (Load Neutral)
BLACK
(Hot)
BLACK (Load Hot)
RED (Load Hot)
WHITE
RED
(Hot)
WHITE (Load Neutral)
BLACK
(Hot)
BLACK (Load Hot)
RED (Load Hot)
GFCI Breaker Box
Front View of GFCI
Spa Control Box
CIRCUIT BOARD
WHITE
(NEUTRAL)
BLACK (HOT)
RED (HOT)
GREEN
(GROUND)
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
BP501G1 and BP501X control
boxes and Auxiliary Heater
WHITE
(NEUTRAL)
BLACK (HOT)
RED (HOT)
GREEN
(GROUND)
CIRCUIT BOARD
GROUND TERMINAL BLOCK (ATTACHED
TO OUTSIDE OF SYSTEM BOX)
BP20X control box
Control
Box
Control
Box
Auxiliary
Heater
WHITE (Neutral)
WHITE
GREEN (Ground)
RED
(Hot)
WHITE (Load Neutral)
BLACK
(Hot)
BLACK (Load Hot)
RED (Load Hot)
Bottom View of GFCI
WHITE
BLACK (HOT)
RED (HOT)
WHITE
(LOAD NEUTRAL)
Control System GFCI RequiredWires Required
BP501G1 (one pump system) One 40 amp GFCI Four #8 AWG copper wires
BP501G1 (two pump system)
BP501X
BP20X
One 50 amp GFCI Four #6 AWG copper wires
2.5 Testing the GFCI Breaker2.5 Testing the GFCI Breaker
Test the GFCI breaker prior to first use and periodically when the spa is powered. To test the GFCI breaker.
1. Press the TEST button on the GFCI. The GFCI will trip and the spa will shut o
2. Reset the GFCI breaker by switching the breaker to the full OFF position, wait a moment, then turn the
breaker on. The spa should have power again.

8
2.6 GFCI Wiring Diagram for Europe2.6 GFCI Wiring Diagram for Europe
NOTE: See the Cal Spas Pre-Delivery Guide for more information on spa placement for service access
and electrical service.
www.calspas.com/manuals

9
2.7 Filling and Powering Up your Portable Spa2.7 Filling and Powering Up your Portable Spa
This applies to all spa owners EXCEPT those with the Cal Clarity II Bromine generator. See instructions on page
66 for bromine generator operating instructions and spa filling procedures.
Step 1.Step 1. Inspect the spa equipment.
Inspect all plumbing connections in the equipment area of your spa.
• Make Sure unions in the equipment pack are tight. (Be careful not to over-tighten the plumbing fittings.)
• If your spa has gate valves, make sure they are all in the UP or OPEN position.
• Make sure the drain valve is closed and capped.
NOTE: Never run the spa with the gate valves closed or without water circulating for long periods of time.
Step 2.Step 2. Remove the cartridge from the filter canister.
Unscrew the cartridge and remove it.
NOTE: Aer you remove the filter, remove the plastic wrapper and soak it in water for 30 minutes before
you replace it. A dry filter can allow air into the filtration system which can cause the pump to fail to prime.
Never try to pull the filter cartridge while the spa is running in low or high speed (i.e., any speed).
Step 3.Step 3. Fill the spa.
Place a garden hose in the filter canister and fill your spa with regular tap water about six inches from the top.
If the water level is too low or too high, your spa will not operate properly.

10
NOTE: Never fill your spa with so water.
So water makes it impossible to maintain the proper water chemistry and may cause the water to foam, which
will ultimately harm the finish of the spa and void your warranty.
You may fill your fill your spa with well water provided the following conditions are met:
1. Purchase and use a pre-filter to run the well water on the fill-up. The pre-filter will be placed before the spa
filter in the fill-up flow of water.
2. Have a Total Dissolved Solids (TDS) and metals test performed by a qualified person aer the fill-up process
but before any spa use
Step 4.Step 4. Turn on power to the spa.
When the spa is filled to the correct level, turn on the power at the GFCI breaker. (Ensure that the 120V spas are
connected to the proper electrical outlet.)
Step 5.Step 5.
Aer the initial start-up sequence, the control will enter Priming Mode and display a Priming Mode screen. Only
pump icons appear on the priming mode screen. During the priming mode, the heater is disabled to allow the
priming process to be completed without the possibility of energizing the heater under low-flow or no flow
conditions. Nothing comes on automatically, but the pump(s) can be energized by selecting the “Jet” buttons. If
the spa has a Circ Pump, it can be turned on and o by pressing the “Circ” button during Priming Mode.
Prime the pump.
Step 6.Step 6. Install the filter into the filter canister.
NOTE: Make sure the filter has soaked at least 30 minutes before you install it. Insert the filter all the way
and screw it in. Do not over-torque the cartridge during installation, just hand tighten gently.
Step 7.Step 7. Adjust water chemistry.
Test and adjust the water chemistry. See the section on page 64 for instructions on water clarity.
Step 8.Step 8. Let the spa heat up.
When the spa has finished priming the heater will activate. Put the cover on and let the spa heat to the set temp.

11
2.8 Priming the Pump2.8 Priming the Pump
New spa owners oen have diiculty the first time they start their spa and the pump fails to prime. This can be
frustrating, but these simple instructions can help you.
Sometimes air can become trapped in the pump while filling the spa. You will know this has happened when
aer you have filled and started the spa, the pump does not seem to function. You will hear the pump operating,
but no water will be moving.
NOTE: The pump will not work properly while air is trapped in it. Continuing to operate the pump in this
way will cause damage.
Starting up: Priming Mode
Aer the initial start-up sequence, the control will enter Priming Mode and display a Priming Mode screen. Only
pump icons appear on the priming mode screen. During the priming mode, the heater is disabled to allow the
priming process to be completed without the possibility of energizing the heater under low-flow or no-flow
conditions. Nothing comes on automatically, but the pump(s) can be energized by selecting the “Jet” buttons. If
the spa has a Circ pump, it can be turned on and o by pressing the “Circ button during priming mode.
Automatic exiting of Priming Mode
The system will automatically enter the normal heating and filtering at the end of the priming mode, which lasts
4-5 minutes.
Bleeding Air from the Pump
If you have tried priming the pump several times unsuccessfully
using the control panel, you can bleed the air from the pump
manually.
1. Shut o power to the spa.
2. Using a Phillips head screwdriver, remove the front panel
from the spa and locate the pump.
3. Close the gate valve on the discharge side of the pump (if your
spa is installed with one.)
4. Turn the bleeder valve counter clockwise with a small pair of
pliers until the air has been released from the pump.
5. If this is unsuccessful, loosen the Union nut on the side of the
pump with channel locks. When air is bled out tighten the
nut.
6. Turn on power to the spa and press the JETS button If there is
still air trapped in the pump, repeat steps 2 through 5 until the
pump primes.
Priming Mode - M019

12
3. Operating Your Spa3. Operating Your Spa
3.1 spaTouch Icon Driven Control Panel3.1 spaTouch Icon Driven Control Panel
3.2 Changing Languages for the Display3.2 Changing Languages for the Display
Step 1.Step 1. Touch the Settings Icon at the lower right portion of the screen.
Step 2.Step 2. Touch the Right Arrow Icon at the lower right portion of the screen. It takes you to the next screen.
Step 3.Step 3. Touch the Language Icon .

13
Language
The language icon on the setting screen takes you to the language screen. Change the language displayed
on the panel.
Step 4.Step 4. As an example touch the Spanish option as shown below.
Step 5.Step 5. Next, touch the Save Icon on the right to confirm this selection.
Step 6.Step 6. ... and now (as an example), the spaTouch screen will be reset to Spanish.

14
3.3 Screen Navigation and Options3.3 Screen Navigation and Options

15

16

17

18

19