Calypso Nmea Connect Plus User manual

NMEA CONNECT PLUS
GATEWAY
Use Cases
HIGH-END
0809
R
English version
01.05.2023
ULTRASONIC Portable
User manual
www.calypsoinstruments.com

0. Index
1. Brief description of product and layout.
1.1 Brief description of product.
1.2 NCP High-End layout.
2. User cases
2.1 How to display wind data from the NCP High-End via Wifi on PC Display from the
Calypso Instruments Portable and Wired Ranges.
22 How to display wind data from the NCP High-End via Bluetooth or Wifi on
Anemotracker App from the Calypso Instruments Portable and Wired Ranges.
2.3 How to display wind data from the NCP High-End via NMEA 2000 cable on a
Raymarine display from the Calypso Instruments Portable and wired Ranges.
2.4 How to display wind data from the NCP High-End via NMEA 2000 cable on a B&B
display from the Calypso Instruments Portable and Wired Ranges.
2.5 How to display data from the NCP High-End via NMEA 2000 cable on a
Humminbird display from the Calypso Instruments Portable and Wired Ranges.
NMEA Connect Plus High-End
User manual

1. Brief description of product and layout
1.1 Brief description
The NMEA Connect Plus High-End (NCP- High End), can be connected to the Calypso Instruments
Portable Range via Bluetooth Low Energy (BLE) and also to the Calypso Instruments Wired Range.
The NCP High-End can also be forward connected to both NMEA 0183 and NMEA 2000 chartplotters,
displays or NMEA backbones .
The diagram below outline the connection pathway:
Calypso Instruments Portable Range.
Calypso Instruments Wired Range.
1
NMEA Connect Plus High-End
User manual

2
NMEA Connect Plus High-End
User manual
NCP wifi name
0183 Wifi server port as per default
1. Brief description of product and layout
1.1 NCP High-End layout.
Main terminal pins:
The NCP High-End is labeled with:

NMEA Connect Plus High-End
User manual
4. User cases.
4.1 How to display data from the NCP High-End via Wifi on
PC Display from the Calypso Instruments Portable and Wired
Ranges.
scroll
N
3
Add connection.

4
NMEA Connect Plus High-End
User manual
4. User cases.
4.1 How to display data from the NCP High-End via Wifi on
PC Display from the Calypso Instruments Portable and Wired
Ranges (continuation).
Ip
Apply.
it in this field.
Enable

NMEA Connect Plus High-End
User manual
4. User cases.
4.1 How to display data from the NCP High-End via Wifi on
PC Display from the Calypso Instruments Portable and Wired
Ranges (continuation).
5
•

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via Bluetooth or
Wifi on Anemotracker App from the Calypso Instruments Portable
and Wired Ranges.
P P
6
t

7
NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via Bluetooth or
Wifi on Anemotracker App from the Calypso Instruments Portable
and Wired Ranges (continuation).
Start receiving data in Anemotracker app.

8
NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via Bluetooth or
Wifi on Anemotracker App from the Calypso Instruments Portable
and Wired Ranges (continuation).
P

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via Bluetooth or
Wifi on Anemotracker App from the Calypso Instruments Portable
and Wired Ranges (continuation).
input it in this field.
Start receiving data in Anemotracker app.
9
Server address

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the Raymarine display from the Calypso Instruments
Portable and Wired Ranges.
For those who are looking for displaying wind data on a second device.
To carry out this connection you need to use a Raymarine display.
• Once in the Raymarine dashboard, press on Settings.
• Once in settings, press on Network. Make sure your NCP High-End appears in this section as
it means it is connected. If for some reason you don’t see it, it means the NCP High-End is not
being detected by the Raymarine display. Please double check your connection. If the issue
persists, contact us at [email protected].
10

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the Raymarine display from the Calypso Instruments
Portable and Wired Ranges.
• Go back to Dasboard. Start reading wind data.
• If ,for some reason, you don’t see a zero data in your dashboard, it means that the NCP
High-End is connected but it is not receiving data from the wind meter. In this case,
please double check the wind meters’ connection. If you see nothing (please see picture
below), it means the NCP High-End is not well connected. Please, double check the
connection. If the issue persists please contact us at [email protected].
11

B&G
NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the B&G display from the Calypso Instruments
Portable and Wired Ranges.
For those who are looking for displaying wind data on a second device.
To carry out this connection you need to use a B&G display.
• Once in the B&G dashboard, press on Settings. Scroll down and select System.
• Once in system, select Network.
12

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the B&G display from the Calypso Instruments
Portable and Wired Ranges.
• In network, select Sources.
• In sources, click on Auto Select.
13

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the B&G display from the Calypso Instruments
Portable and Wired Ranges.
• Once in autoselect, press on Start.
• A progress bar will be shown to let you know it is looking for devices connected to the NMEA
2000 network. In this picture below, the B&G is recognizing the NCP High-End. If you B&B
display does not recognize your NCP High-End please double check the connection. If the
issue persists, contact us at [email protected].
14

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the B&G display from the Calypso Instruments
Portable and Wired Ranges.
• As soon as the search is completed, press on Close.
• Go back to Dashboard. Start receiving wind data. If you don’t receive data please double check
the connection. If the issue persists, please contact us at [email protected]
15

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the Humminbird display from the Calypso Instruments
Portable and Wired Ranges.
For those who are looking for displaying wind data on a second device.
To carry out this connection you need to use a Humminbird display.
• Once in the Humminbird dashboard, press on Settings.
• Once in settings, go to Network and select Data Sources.
16

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the Humminbird display from the Calypso Instruments
Portable and Wired Ranges.
• One in data sources, press on Wind Speed & Direction.
• Make sure the NCP High-End shows up there. Select the NCP High-End to make sure your NCP
High-End wireless recognizes your NCP High-End. If it doesn’t, please double check your
connection. If the issue persists, contact us at [email protected].
17

NMEA Connect Plus High-End
User manual
4. User cases.
4.2 How to display data from the NCP High-End via NMEA 2000
cable on the Humminbird display from the Calypso Instruments
Portable and Wired Ranges.
• Go back to dashboard. Start receiving wind data.
18