Camas gabion post type 4 User manual

1. Benötigtes Werkzeug
• Ready mixed concrete / screed mortar
• Water
• Folding ruler
• Spirit level
• 5.5 mm hexagon
• Water pump pliers
• Spade
• Angle grinder & safety glasses
We recommend a hole size
of (W/D/H) 30 cm x 30 cm
x 60 cm. Concrete requires
approx. 55 - 60 L or
2x 40 kg bag per hole.
Both sides
attach
After the concrete
foundations have
set, the mesh and
spacers can be
mounted. Please
place the M8 fence
construction screw
straight and turn it
hand-tight.
Please refer to the table
on the following page for
the required number of
spacers.
3. Set posts
6. Installing the spacers
ATTENTION: Please distribute evenly.
4. Fence mounting
both sides
2480mm
50 cm 60 cm
MONTAGEANLEITUNG
BPS PFOSTENTYP C
ASSEMBLY INSTRUCTIONS
Camas gabion post type 4
1/2
2. Foundations
Dimension between the
Posts = clear width
Watering
With a gradient of
more than 10% it is
recommended to
divide the grids*.
*Additional posts are
required here!
5. Setting with slope
Perpendicular!

On the inside of the double rod mat
you should cut out about 3 cm.
Protect your bending
frame from unwanted
rust with our special
paint.
1. 4.
5.2.
3.
7. Set spacer tightly
10. Corner Quantity required:
8. Fill 9. Layer by layer straighten the stones by hand
Edge protection
Gabion height Spacer
630-830 mm 10
1030 mm 15
1230-1430 mm 20
1630 mm 25
1830 mm 30
2030 mm 35
2230 mm 40
2430 mm 45
2/2
Camas gabion
post type 4
CAMAS GmbH
Am Förderturm 10-12
D- 44575 Castrop-Rauxel
E-Mail: [email protected]
Internet: www.camas.de
Tel.: [phone] – 97 31 40
®