Cambridge Sound Works OontZ XL User manual

OontZ XL
User Manual

!

!

!

!

Introduction
What is Bluetooth technology
Bluetooth® is a wireless technology that enables wireless data communication over a short range
between digital devices. In general, Bluetooth-enabled devices connect wirelessly with each other
within a range of 32 feet (10m).
In order for two Bluetooth-enabled devices to work together wirelessly to perform a certain function,
both devices should be compatible with the same Bluetooth profile that supports this function.
Introduction to OontZ XL
Thank you for purchasing our product.
This is a Bluetooth wireless speaker system that supports Bluetooth version 2.1.
This device is compatible with the following Bluetooth profiles:
A2DP - Advanced Audio Distribution Profile
AVRCP - Audio/Video Remote Control Profile
HFP - HandsFree Profile
With this device, you can:
• Play music from a Bluetooth enabled mobile phone or audio source that is compatible with A2DP,
such as an iPod/iPhone/iPad, Android smartphone, PC, or Mac.
• Use the device as a speaker phone for a Bluetooth connected mobile phone.
• Play music from an auxiliary device connected through the supplied 3.5mm audio cable.
• Charge your portable device such as an MP3 player or mobile phone through the USB socket on the
back panel.

Overview
1. DC power socket
Connect the power adapter.
2. 5V USB OUT
Charge a portable device through a USB charging cable (not supplied).
3. AUX IN
Connect an auxiliary device.
4. Microphone
5. Indicator
Indicate the recharge status of the built-in battery.
6. Indicator
Indicate the Bluetooth pairing status.
7/8.
In Bluetooth mode, press to skip to the previous or next song.
9/10.-/+
Turn down/up volume.
11.Button
During play in Bluetooth mode:
(Press) pause or resume music play.
(Press and hold) remove the existing pairing information.
(Press) answer/hang up a call for a Bluetooth connected mobile phone.
(Press and hold) reject during a call for a Bluetooth connected mobile phone.
12.Button
Press once to turn on the device.
In power-on mode, press and hold to turn off the device
During music play, press to mute or resume sound output.

Unpack
Unpack and identify the items of your package:
. 1 x Bluetooth wireless speaker
. 1 x power adapter
. 1 x 3.5mm audio cable
. 1 x User Manual
. 1 x warranty card
Connect power
With a built-in battery, this device allows you to enjoy music or charge your portable devices on the go.
Before use outdoors, make sure that the built-in battery is fully recharged.
Connect the supplied power adapter
Tip: To recharge the built-in battery, you need to turn on the device.
Turn on the device
Press on the top panel.
☞The indicator flashes white and red alternately, and turns red when the built-in battery is fully
recharged.
☞The indicator flashes white and the device enters Bluetooth pairing mode automatically.
Turn off the device:
Press and hold on the top panel.
☞Both the and indicators turn off.

Pair with a Bluetooth-enabled device
Before using the Bluetooth feature of OontZ XL for the first time, you need to pair OontZ XL with
another Bluetooth- enabled device, such as an iPod/ iPhone/iPad, Android smartphone, PC, or Mac.
After successful pairing, each time when the paired device (Bluetooth-enabled) and OontZ XL are
powered on and within the detectable range (32 feet or 10m), they will be wirelessly connected to
each other automatically.
Notes:
• If your paired device fails to connect with OontZ XL after activation, you may need to select the
device name of OontZ XL from the list of Bluetooth equipment on your paired device to set up
wireless connection again.
• Make sure that OontZ XL and the device to be paired are located within the detectable range (32 feet
or 10m).
1. Enable the Bluetooth function on your device to be paired with OontZ XL.
☞The device to be paired with OontZ XL enters Bluetooth searching mode.
☞After a while, “OontZ XL” is displayed in the list of Bluetooth equipment on the device to be
paired with OontZ XL.
2. Select “OontZ XL” on the device to be paired with OontZ XL to start pairing (if required, enter the
password “0000”).
☞After successful pairing, the indicator on the top of OontZ XL turns white steadily and the
speaker beeps.
Tip:
• You can press and hold the button on the top of OontZ XL to remove the existing pairing
information. In this case, the indicator starts to flash white again and the speaker returns to
Bluetooth pairing mode.
Play music from a Bluetooth connected device
Note:
• Make sure that wireless connection has been set up between the paired device and OontZ XL.
Start music play on your device paired and connected with OontZ XL.
☞You can hear music streamed to the Bluetooth wireless speaker.
During music play, you can:
Press on the top panel to skip to the previous/next song.
Press on the top panel to pause or resume music play.
Press on the top panel to adjust volume.
Press on the top panel to mute or resume sound output.

Use OontZ XL as a speaker phone
If the paired mobile phone is compatible with Bluetooth profiles HFP, you can use OontZ XL as a
speaker phone to answer/reject a call, or hang up. This is very useful when you want to have a
teleconference.
Notes:
. Make sure that your mobile phone is compatible with Bluetooth profiles HFP. See the user manual
of your mobile phone for details.
. Make sure that wireless connection has been set up between the paired mobile phone and
OontZ XL.
. When there is an incoming call, music play will be paused.
When there is an incoming call, you can:
. Press on the speaker phone to answer the call.
. Press and hold on the speaker phone to reject the call.
During a call (incoming or outgoing), you can:
• Listen through the speaker phone.
• Speak towards the microphone located at the left side of the speaker phone.
• Press VOL +/- on the speaker phone to adjust volume.
• Press on the speaker phone to hang up.
Listen from an auxiliary device
Through this speaker system, you also can listen to music from any auxiliary device with a 3.5mm
headphone socket, such as a PC or an MP3 player.
1. Connect the supplied 3.5mm audio cable.
. One end to the AUX IN socket on the back panel
. The other end to the 3.5mm headphone socket on an auxiliary device
2. Start music play on the auxiliary device.
During music play, you can:
. Press on the top panel to adjust volume.
. Press on the top panel to mute or resume sound output.

Charge a portable device through the USB socket
You can charge your portable devices, such as your mobile phone or MP3 player through the USB
socket on the back panel.
Connect a USB charging cable (not supplied):
. One end to the USB socket on your portable device
. The other end to the USB socket on the speaker
Specifications
The technical specifications are subject to change without prior notice.
AC power
Input: 100-240V~50-60Hz 0. 8A Output: 15V 1500mA
Output power
2 x 7W
Frequency response
50Hz-20KHz
Speaker drivers
2.25”*2 full range + (2’*3.5”)*3mm passive radiators
S/N
≥75dB
THD+N
≤1% (1kHz, rated power output)
Battery Life
15H at 75% Volume
Dimension
(W x H x D) 260 x 90 x 80 (mm)
Weight
1.034kg (net); 1.6kg (gross)
Audio input
1 x 3.5mm socket; 1 x wireless input (Bluetooth)
Wireless
Bluetooth 2.1 (A2DP)

Trouble Shooting
Problem
What Should I do?
No power
Press Power button to turn on the speaker
Ensure the Speaker is fully charged or you have the speaker to power source
No sound or only
distorted sound
Check the Bluetooth connected device supports A2DP
Press Vol-/+ button to adjust volume
Check whether the sound output is muted. Press Power button to resume
sound out
Check whether wireless connection has been set up between the paired
device and Speaker
Cannot answer calls
Check whether wireless connection has been set up between the paired
device and Speaker
Check whether the paired mobile phone supports Bluetooth profile HFP
I cannot control the
music from my
Speaker
Ensue your Bluetooth device supports AVRCP
Press Bluetooth button to resume music
Music does not
resume after hanging
up a call
Ensure you have paired the speaker correctly with your Bluetooth device
(Paring the OontZ XL with a Bluetooth Device (First time connection)
Resume music play on the Bluetooth connected device
I cannot find
OontZ XL on the
Bluetooth device
Make sure you have enabled the Bluetooth function on the device paired with
OontZ XL
Check whether OontZ XL is connected wirelessly with another paired device.
OontZ XL only supports one Bluetooth connection at a time
I cannot charge my
mobile devices
through the USB
socket
Check whether you have connected a USB cable to both OontZ XL and your
mobile device securely
Built-in battery of OontZ XL may be drained
Connect the speaker to AC mains