Cambro Camshelving Universal Storage Rack User manual

Camshelving®Universal Storage Rack
Assembly & Installation Guide
KIT PARTS TOOLS NEEDED
Starter Kit:
2 Rail Panels (C)
16 Rail Panel Brackets – 8 (A), 8 (B)
8 Traverse Brackets (D)
8 Plastic Thumb Screws (E)
VIDEO GUIDE
Instructions
available in
multiple
languages
Add-On Kit:
1 Rail Panel (C)
8 Rail Panel Brackets – 4 (A), 4 (B)
4 Traverse Brackets (D)
4 Plastic Thumbscrews (E)
A B
C D E
www.cambro.com
OR
COMPONENT

Step 1
Assemble 1 Rail Panel Bracket set.
(A and B)
Step 2
Snap Rail Panel Bracket set
into Rail Panel (C) Corner.
Step 3
Repeat Steps 1 & 2
for remaining 3
corners of Rail Panel.
INSTALLATION REQUIREMENTS
• 4 open dovetails between shelves
• NO shelf plates on traverses
• Open space between back of unit and wall: 3” - 5” (7,6 - 12,7 cm)
CLICK
(A)
(C)
(B)
✓

Step 5
Slide Rail Panel to
one side/end.
Step 6
1. Slide each Traverse
Bracket (D) onto Rail Panel
and Traverse.
2. Install Thumbscrew.
3. Adjust and straighten
Rail Panel.
4. Tighten Thumbscrews
with pliers.
4 X (D) 4 X (E)
Step 4
Place Rail Panel, pointing
up, between Traverses.
Brackets must be inside the Traverses.

www.cambro.com
UMUNVR
D052201
CAMBRO EUROPEAN LOGISTICS
TEL: [phone]
FAX: [phone]
[email protected]
CAMBRO U.S.A.
TEL: [phone]
FAX: [phone]
[email protected]
CAMBRO IRELAND
TEL: [phone] Toll Free
FAX: [phone]
[email protected]
© Copyright Cambro Manufacturing Company. Printed in the U.S.A. 06/22
勘宝制造(惠州)有限公司
电话: [phone]
传真: [phone]
[email protected]
Step 7
1. Prepare next Rail Panel (Steps 1-3).
2. Install on Shelf Traverses (Steps 4 & 6).
3. Tighten Thumbscrews by hand only.
TIP: Inserting a tray, or pan, as illustrated, will more accurately determine
the distance needed between Rail Panels.
Step 8
1. Test fit with storage item
placed on top rails first.
2. Tighten top Thumbscrews
with pliers.
3. Test fit with same storage
item on bottom rails and
adjust as needed.
4. Tighten Thumbscrews
with pliers.