Camco eaz lift 48475 User manual

MODEL #48475
™
WARNING Tools for Installation
• (2) 13mm wrench
• (2) 17mm wrench
• Appropriate safety protection (gloves, eye
protection, etc.)
OR
• (2) Adjustable wrenches, 0 to 30mm
• The maximum weight capacity is 500 pounds
• Do Not Exceed vehicle or hitch manufacturer’s maximum tongue weight rating
• For use with Class III or better 2” hitch receiver only
• Distribute loads evenly. Do not load heavy objects toward the edges of the rack
• Do not load objects that overhang the rack's side rails
• Not for transport of people, animals, or flammable liquids
• Do not load items in close proximity to the exhaust pipe. If exhaust pipe extends toward the rack an
angled or curved exhaust tip must be used to redirect exhaust away from the cargo carrier
• Securely fasten cargo to the carrier
• Carrier should not be used if carrier is wider than the vehicle
• If carrier or cargo block license plate the license plate should be relocated to a more visible location
• Do not block rear tail lights with the carrier or cargo
CAUTION: CAMCO CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGES DUE TO IMPROPER
USE OR INSTALLATION OF THIS PRODUCT. CAMCO CANNOT BE HELD ACCOUNTABLE FOR THE
STRUCTURAL INTEGRITY OF ANY FRAME.
NOTICE
If product components
are missing or damaged
do not return to
dealer, contact the
manufacturer.
1-800-334-2004
Installation Instructions
No. Description Qty.
1 Post 1
2 Basket 2
3 Cross Brace 2
4 Hitch Pin 1
5 Spring Clip 1
6 M8X35 Bolt 4
7 M8 Washer 4
8 M8 Lock Nut 4
9 M10X75 Bolt 4
10 M10 Washer 4
11 M10 Lock Nut 4
Includes:
HITCH MOUNT
CARGO CARRIER
WARNING: READ THE FOLLOWING
INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING INSTALLATION.
2
1
4
3
5 6 9
10
11
7
8
Rear >

Instructions
HARDWARE
HARDWARE
HARDWARE
CAMCO MFG., INC.
121 Landmark Drive / Greensboro, NC 27409
1-800-334-2004 www.camco.net #316
Align Baskets and Post
Loosely tighten bolts and
locknuts at this time.
Secure with Hitch Pin
and Spring Clip
Camco warrants this product to be free from defects in material and workmanship under normal use and service conditions for 12 months from the date of first purchase. Camco’s liability is limited solely to the replacement of any
defective product returned to us. To the extent allowable by law, Camco makes no other warranty, either expressed or implied, nor assumes any liability for incidental or consequential damages resulting from the use of this product or
for breach of warranty of merchantability or fitness for a particular purpose. Submit warranty claims to Camco Manufacturing, 121 Landmark Drive, Greensboro, NC 27409.
LIMITED WARRANTY
1
3
29
6
4
10
7
5
11
8
Fully tighten all bolts
and locknuts.