Cameo LED GOBO SCANNER 80 User manual

LED GOBO SCANNER 80
CLSCAN80W
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5-6
OPERATION 6-7
INSTALLATION 7
DMX TECHNOLOGY 8
TECHNICAL DATA 9
MANUFACTURER’S DECLARATIONS 9-10
DMX CONTROL 51-53
DEUTSCH
SICHERHEITSHINWEISE 11-12
EINFÜHRUNG 12
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 13-14
BEDIENUNG 14-15
MONTAGE 15
DMX TECHNIK 16
TECHNISCHE DATEN 17
HERSTELLERERKLÄRUNGEN 17-18
DMX STEUERUNG 51-53
FRANCAIS
MESURES PRÉVENTIVES 19-20
INTRODUCTION 20
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 21-22
MODE D’EMPLOI 22-23
MONTAGE 23
TECHNOLOGIE DMX 24
CARACTÉRISTIQUES TECHNIQUES 25
DÉCLARATIONS DU FABRICANT 25-26
PILOTAGE EN MODE DMX 51-53
ESPAÑOL
MEDIDAS DE SEGURIDAD 27-28
INTRODUCCIÓN 28
CONEXIONES, CONTROLES E INDICADORES 29-30
FUNCIONAMIENTO 30-31
MONTAJE 31
TECNOLOGÍA DMX 32
DATOS TÉCNICOS 33
DECLARACIONES DEL FABRICANTE 33-34
CONTROL DMX 51-53
POLSKI
ŚRODKI OSTROŻNOŚCI 35-36
WPROWADZENIE 36
PRZYŁĄCZA, ELEMENTY OBSŁUGOWE I WSKAŹNIKOWE 37-38
OBSŁUGA 38-39
MONTAŻ 39
TECHNIKA DMX 40
DANE TECHNICZNE 41
OŚWIADCZENIA PRODUCENTA 41-42
STEROWANIE DMX 51-53
ITALIANO
MISURE PRECAUZIONALI 43-44
INTRODUZIONE 44
CONNESSIONI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 45-46
UTILIZZO 46-47
MONTAGGIO 47
TECNOLOGIA DMX 48
DATI TECNICI 49
DICHIARAZIONI DEL PRODUTTORE 49-50
CONTROLLO DMX 51-53

ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH
3
DMX
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW.CAMEOLIGHT.COM.
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is always
installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Keep a minimum distance of 20 cm around and above the device.
12. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the
special instructions noted below. Do not expose this equipment to flammable materials, fluids or gases. Avoid direct sunlight!
13. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
14. Make certain that objects cannot fall into the device.
15. Use this equipment only with the accessories recommended and intended by the manufacturer.
16. Do not open or modify this equipment.
17. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
18. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
19. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in anot
her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by
authorized, qualified personnel.
20. Clean the equipment using a dry cloth.
21. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
22. Plastic bags must be kept out of reach of children.
23. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority
to operate the equipment.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
24. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
25. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
26. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
27. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
28. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
29. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
30. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
31. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
32. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
33. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
34. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
35. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
36. Please keep a distance of at least 0.5 m to any combustible materials.
37. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT connection

4
DEUTSCHFRANCAIS
ESPAÑOL ENGLISH
ITALIANO POLSKIDMX
to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not exceed the
specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.
The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national
accident prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential
health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels
(SPL) that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged
exposure to volumes in excess of 90 dB.
INTRODUCTION
LED GOBO SCANNER
CLSCAN80W
CONTROL FUNCTIONS
9-channel and 12-channel DMX control
Master/slave modes
Standalone operation
FEATURES
Bright 80 W cool white LED. Auto programme and sound-control as standalone operating modes. Master/slave functionality. Mounting
bracket. Operating voltage 100–240 V AC. Power consumption 130 W
OPERATION
The Cameo SCAN 80 W is a DMX-512-controllable LED gobo scanner and can be used as a standalone unit, in master/slave mode and
operated by sound-control.

ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCH
ENGLISH
5
DMX
12
758
6
3 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
1POWER IN
IEC mains socket with built-in fuse holder. A suitable power cable is included.
IMPORTANT NOTE: Replace the fuse only with a fuse of the same type and of the same value according to the stamp on the device! In the
event of repeated fuse failure, please contact an authorised service centre.
2POWER OUT
IEC power output socket. Facilitates power supply to other CAMEO spotlights. Ensure that the total current consumption of all connected
devices does not exceed the value specified on the device in amperes (A).
3DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console).
4DMX OUT
Female 3-pin XLR socket for sending the DMX control signal.
5LED DISPLAY
The four-digit LED display shows the current operating mode and other system settings.
6CONTROL BUTTONS
MODE: Selection of the main menu items. Move up one level in the menu structure.
ENTER: Confirms programme selection and value changes.
UP and DOWN: Selection of operation mode, system settings and programmes, e.g. changing of programme speed and DMX address.
7MIC
Microphone for music-control mode