Camos RV-531 User manual

INSTRUCTION MANUAL
Printed in Korea
RECORD YOUR MODEL NUMBER (Now, while you can see it)
The model and serial number of your MONITOR are located on
the back of the cabinet. For your future convenience, we suggest
that you record these numbers here :
MODEL number :
SERIAL number :
REAR-VIEW SYSTEM
5” TFT LCD MONITOR & CAMERA
MODEL : RV-531/532AH
Thank you for choosing this product.
Please read this instruction manual carefully before operating this product.
■CAMERA CM-31AH
Input Voltage
Camera Weight
Operating Temperature
Minimum illumination
Dimension
Accessories
-10℃ to + 55℃ (+14℉ to +131℉)
70(W) X 44(H) X 57(D)mm
0.4Kg(0.88lbs) including bracket
0.01LUX
2.7(W) X 1.7(H) X 2.2(D)inch
DC 12V/200mA Max
Camera Bracket
Adhesive tape
Sun Visor
Machine screw(Ass'y)(PH) M3x8
Tapping screw(TH)4x10
Machine screw(PHW) M3x6
Spring washer(M3)
Insulation tape
Spring washer(M4)
Extension cable
Pick-up device EIA
CCIR
View of angle
1/3" 290,000 pixels B/W CCD
1/3" 250,000 pixels B/W CCD
120 degree diagonal
1
1
1
4
2
3
2
3
1
1
20

3
Please read the Safety Rules carefully before using this product. Following of the
safety rules prevents users from any damage related with the misuse of this product.
It is very important that users follow these safety rules. We state Caution and
Warning to clarify any potential for damage associated with misuse of the product.
“”
“”
“”
3
6
7
8
9
10
14
15
17
18
1. Safety Rules
2.
3.
4. Terms of part
5. Remote Control
6. Functions
7. Connections
8.
9. Changing Remote Control Battery
10. Specifications
Before Use
Special Features of the product
Installation
Contents
1. Safety Rules
About signs
“Do not”
Warning
Place the product where it doesn’t prevent the driver from driving.
--- The driver’s view of sight should not be blocked.
Do not watch or operate the product while driving.
--- This may cause a major accident.
Do not place the product near the passenger-side airbag.
--- Airbags may not operate properly or may cause personal damage
and accident when accidentally opening.
Do not get product wet and operate with wet hands.
--- This may cause electric shock.
Do not use in bathtub. Do not pull the plug with wet hands.
---This may cause electric shock.
---This may cause fire or electric shock.
Do not use unapproved power voltage.
Do not use unapproved Cigarette Lighter Adapter.
--- This may cause fire ,electric shock and/or malfunction.
Do not damage or bend electric cord. Do not place heavy objects
on electric cord.
---This may cause fire from electric sparks.
--- This may cause fire and/or electric shock.
Do not use damaged electric cord.
Do not put pins or needles into the product or electric cord of product.
--- If this happens, stop the product operation immediately. Continuous use may
cause fire, electric shock and/or malfunction.
Warning May cause bodily harm or
even death if users ignore
warnings in the safety rules.
May cause bodily harm or
even death if users ignore
cautions in the safety rules.
Caution
“Precautions”
“Follow directions carefully”

5
4
Do not attempt to open, disassemble or repair the product by any
person except an authorized service dealer.
--- Unplug the product when water or metal comes in contact with the product.
Continuous use may cause fire, electric shock and/or malfunction.
Stop using the product immediately when you drop it or damage
the outside shell.
Be careful when thunder and lighting occurs.
Do not use non-specified double socket and extended car battery cord.
Caution
Do not put the product in a place where sudden temperature
increase occurs such as the vehicle’s dashboard.
Do not place the product where high temperature and/or the direct
ray of the sun occurs.
--- This may cause fire, electric shock and/or malfunction.
Do not put the product in an unstable place where the product may
be exposed to shock and/or impact.
--- The product may fall and be damaged.
Do not place electric cord near a heating product.
--- The cord surface may melt and cause fire and/or electric shock.
Do not press or drop LCD panel.
--- You should not give any shock on LCD panel because it may cause damage.
Always clean the cigarette lighter socket before using product.
--- Bad connection may cause fire.
Clean electric socket area often.
--- Dust in the area may cause fire.
Keep electric cord properly positioned.
--- An improperly positioned electric cord may cause fire or electric shock
when metal material is in contact with the power source.
If you find any strange occurrences or malfunction in the product or any foreign
substance gets into the product, please contact the authorized retailer where you
purchased the product.
---This may cause malfunction.
In direct rays of the sun and near heating products
High in humidity and with bad ventilation
Dusty or oily locations
Low temperatures
Unstable environment
Do not use the product in the following locations.=
=
=
=
=
=
Unplug the product and remove cords when moving.
--- It may damage cords and cause fire and/or electric shock.
Do not place any containers with water or any small metal objects
on top of the product or nearby it.
--- Continuous use may cause fire, electric shock and/or malfunction.
--- There is a danger of electric shock.
--- This may cause excess heat and/or fire.
--- This may cause electric shock and/or malfunction. You should request
an authorized service dealer for any inspection and repair of the product.
The car engine should be running when you use the product in a car.
---Without the engine running, you may have excessive discharge
of the car battery.
Do not pull the cord line when you unplug it.
---Damaged cords may cause fire and/or electric shock.
Hold the plug when you unplug the product. Put a battery in the
remote control properly with +, - signs as directed in this manual.
--- Improper use of batteries may cause fire and/or damage.
Unplug the product when you don't use it for a long period of time.
---Insulation may cause electric shock, electric leak and/or fire.
Unplug the product when you clean or care for it.
---Not unplugging product may cause electric shock.
Do not watch Monitor for a long period of time.
---This may damage your eyesight.
When you transport the product, remove all cords and do not
give any shock.
---This may cause a malfunction.
Do not place volatile materials such as insecticides on the product.
The product should not come in contact with rubber or vinyl
for a long period of time.
---The surface of the product may change and paint may peel off.

67
To safely use the product, please read the user’s manual carefully before use.
Connect all lines as directed in the product connection map in the manual.
Do not touch the LCD panel.
Use the product at the temperature range of C ~ .
Screen may be a little dark when the product is operated in low temperature areas.
Screen will show normal luminosity after a few minutes.
Do not disassemble and modify the product in any way.
This may cause fire and/or electric shock.
When you install the product in a car, do not set a volume level too loud for others
to hear outside.
When you install the product in a car and watch TV, the car engine should be
running as there might occur excessive discharge of the car battery.
Any liquid leaking into product may cause malfunction.
O
=
=
=
=
=
=
=
=
=
050 C
O
2. Before Use
=
=
=
=
=
=
The driver should not use the product while he/she is driving.
Quality of pictures on screen may vary depending on the radio field strength
in different locations. You should use video equipment where you experience
weak radio field strength.
Follow traffic laws when you use the Navigation Route System.
Be cautious of humidity and shock when you use the product in a car.
The product should not be placed on the dashboard or near engine
Cover the product when exposed to direct rays of the sun for a long period of time.
(You should keep the product at a temperature range of -25 C ~ 60 C.)
OO
3. Special Features of the Product
(Max AT 12V)
=
=
=
=
=
=
=
=
=
=
Application of 8bit MICRO CONTROLLER
Application of TFT LCD with high resolution and low reflection
All functions are automatic (Remote function)
All functions are displayed on screen (OSD function)
PWM volume control
Mode selection function
One-touch dimmer
Low energy consuming rate
Audio mute function (remote control)
Language Display Selection
(ENGLISH-GERMAN-KOREAN-JAPANESE -ITALIAN -FRENCH- SPANISH)
=
=
=
Headphone Jack
2 Camera(Rear, Side View), 1 A/V Selection
1 Cable solution
■CAMERA CM-31/32AH
=
=
=
=
=
Aluminum die-casting housing.
The camera is designed for compact size and waterproof housing.
The h
Auto-lris makes the picture fine in any bright condition.
ighest quality of CCD provides you with the best picture.
Night vision using the CDS sensor.
■MONITOR CM-505
■Precautions (when you use the product in a car)

9
8
4. Terms of part 5. Remote Control
③ (POWER) Power ON /OFF button(LED OFF) (LED ON)
②DIMMER
①MODE CAM1/CAM2/AV selection function
①
⑤
⑧
⑦
④
⑥
③
②
① POWER Power ON/OFF Key
④VR ◀▶ Controls Volume and changes MENU level
⑤ AUTO PIC Changes brightness and contrast level of the screen
(User, Dynamic, Normal, Mild)
⑥ RECALL Displays present status and volume level
Selects menu and changes function
⑧ MENU
Moves and selects Menu
⑦ PRO ▼▲
Returns to the previous sound level when you push again
For muting sound
③ MUTE
CAM1/CAM2/AV selection function
② MODE
DYNAMIC/NORMAL/MILD/PICTURE USER
selection function
⑤REMOTE SENSOR WINDOW Sensor for receiving signal from the remote control
Headphone Jack
④(H/P)
③②① ⑤
④

11
10
POWER
ON OFF
6. Functions
Push POWER button to on the power
(STAND BY state is OFF)
Push POWER button again to off the power
①
②
① Push MODE button
ON/OFF KEY
MODE
CAM1
CAM1 CAM2
MUTE
MUTE
MUTE
VOLUME 0
VOLUME 30
VOLUME 10
VR
AUTO PIC , , ,DYNAMIC NORMAL MILD USER
PICTURE USER CONTRAST, BRIGHTNESS, COLOR, TINT
AUTO PIC
RECALL
①▶
②
Press VR
The monitor shows volume on the screen and
volume is up.
①◀
②
Press VR
The monitor shows volume on the screen and
volume is down.
DYNAMIC NORMAL MILD USER
Press AUTO PIC to select or PICTURE USER
for the screen.
DYNAMIC/ NORMAL/ MILD
PICTURE USER
CONTRAST
BRIGHTNESS
COLOR
TINT
75
75
75
0
SELECT ADJUST
PICTURE DYNAMIC
AV1
VOLUME 30
Press RECALL to check the AV MODE.
It is a function to change video signal.
The display is disappeared 6second later after setting.
② A 1 or 2 appears on the screen and
it is disappeared after 6 seconds.
CM CM orAVA
①
②
This function works to MUTE sound instantly.
VOLUME LEVEL returns to its previous setting when button is pushed again.
③Starts from sound level 1 when the VR button is pushed after using MUTE.
This function can be operated by the REMOTE CONTROL
AV

12 13
MENU
1. SETUP
1) PICTURE USER
75
75
75
0
PICTURE USER
This button is for SETUP, PICTURE USER
There are 2 ways
■
SETUP
SETUP
=
PICTURE USER MODE
=
PICTURE USER
OTHER MODES
①
②
Use MENU button to display SETUP MAIN MENU and SUB MENU
Use RO button to change MAIN MENU, changed color in pink
when it is selected.
P▼▲
SE UPT PICTURE
③ Use PRO ▼▲ button to select MAIN MENU and use
VR ◀▶button to change SUB MENU.
DISPLAY does correction and displays revised contents at the same time.
OSD sign disappears in 6 seconds after the end of use and all work is saved
simultaneously.
POWER OFF KEY forces current mode to be released disregarding its position.
④
⑤
⑥
●
●
●▼▲
Select PICTURE USER in SETUP MENU to display.
Push MENU button two times to display MAIN MENU and SUB MENU.
Use PRO button to change MAIN MENU. Color of MAIN MENU
changes to pink and is selected.
CONTRAST TINT COLOR
BRIGHTNESS
①
.
Use button to select
CONTRAST, BRIGHTNESS and COLOR MENU.
(Selected menu is in pink)
② Push VR button, and BAR and
number are changed and screen is adjusted.
(BAR sign is in pink when the number is 75)
③ Use MENU button to return to PICTURE MENU
PRO▼▲
◀▶
■CONTROL OF TINT
① Use button to select
TINT MENU. (Pink when it is selected)
② Push button, and BAR
and number are changed to red while screen
is adjusted in red.
③ Push button and BAR
and number are changed to green while screen
is adjusted in green.
④ Use MENU button to return to PICTURE MENU
PRO
VR
VR
▼▲
◀
▶
■CONTROL of CONTRAST
CONTRAST
BRIGHTNESS
COLOR
▶TINT
75
75
75
0
PICTURE USER
▶CONTRAST
BRIGHTNESS
COLOR
TINT
SELECT ADJUST
SELECT ADJUST
= SYSTEM :
PAL NTSC AUTO
ENGLISH GERMAN KOREAN JAPANESE
ITALIAN
FRENCHSPANISH
=LANGUAGE :
DYNAMIC NORMAL MILD
NORMAL
USER
PICTURE :=
=NOR/MIR :
PICTURE USER
75
75
75
0
BRIGHTNESS
COLOR
TINT
▶CONTRAST
SELECT ADJUST
SYSTEM
LANGUAGE
DISPLAY
NOR/MIR
▶PICTURE
AUTO
ENGLISH
FULL
NORMAL
USER
SETUP
SELECT ADJUST
MIRROR
*NTSC ONLY
This is only for CAM1,CAM2 mode.
It controls a camera picture (Normal/Mirror)

15
14
7. Connections
Camera 1
(Not Supplied)
CIGARETTE LIGHTER
ADAPTOR CIGARETTE LIGHTER
SOCKET IN
①CAMERA 1
②CAMERA 2
③DC12V
④YELLOW(VIDEO1)
⑤WHITE(AUDIO1)
⑥BLACK(STAND By1)
⑦GREEN(STAND By2)
DVD (Not Supplied)
Camera 2
(Not Supplied)
⑥STAND BY 1(BLACK, Priority)
⑦STAND BY 2(GREEN)
STAND BY + (FOR REAR VIEW)
Connect this line to “+” of reverse light lamp.※
STAND BY + (FOR SIDE VIEW)
Connect this line to “+” of side light lamp.※
■MONITOR CM-505
Insulation
Tape
Extension Cable
1. Choose a location where you install the Monitor. Clean the place for the Stand with
cleanser and remove the Protective Tape. And then attach it exactly where you want.
2. Fasten the Monitor with Tapping Screw.
3. Adjust angle of Stand and install Monitor.
4. Connect each connecting cable as in the product installation reference.
8. Installation
Control Knob
(Angle)
Fix Knob
(Bracket)
Tapping screew
Safeguard tape
Stand Base
Cable Guidance
■Monitor Cable Connection
※Cable Guidance use ※Normal Connection
■MONITOR CM-505

■CAMERA CM-31/32AH
1. Determine a position and a direction of installation so that the rear view can be
effectively seen on the monitor screen.
2. Fix the camera bracket to the vehicle using the provided adhesive tape and
tapping screws with spring washers.
3. Fix the camera between the camera bracket and sun visor using machine
screws, and adjust the angle of camera and fasten the screws firmly.
4. Run the cable from the monitor to the camera.
CAMERA CONNECTOR
①②
③④
⑤⑥
⑦
POWER IN(DC +12V)
HEATING B+ (DC +12V)
NC
VIDEO OUT
AUDIO OUT
NOR/MIR
GND
< CM-31/32AH >
=
17
16
(No. CR2025)
9. Changing Remote Control Battery
Put the battery case back into the remote
control in the direction of the arrow.
Pull battery case in the direction of the arrow.
Place a battery with the + sign upward on
the battery case.
①
②
③
Tapping screw(RH)4x10
Camera Bracket
Adhesive tape
Safeguard tape
Spring washer(M4)
Sun visor
IR-LED
Mic
Machine screw(ASS'Y)
Spring
Washer(M3)
(PH) M3 X 8
Machine screw
(PHW) M3 X 6
CDS sensor

19
18
10. Specifications
ITEM SPECIFICATION
NTSC PAL
PANEL
SCREEN SIZE
NUMBER OF PIXELS
DOT PITCH
BRIGHTNESS
DISPLAY AREA
CONTRAST RATIO
VIEW ANGLE(H/U/D)
13.0 cm (5.0 INCH)
320(H) x 240(V)
0.106(H) x 0.318(V) mm
450 cd/㎡
101.76(H) x 76.32(V) mm
200
5deg / deg / 0deg4301
POWER SUPPLY VOLTAGE
CURRENT
DC 12V - 16V
650mA (DC 12V, MONITOR SET ONLY)
REAR INPUT POWER DC 12V - 16V
INPUT SYSTEM AUTO (NTSC/PAL)
FREQUENCY HORIZONTAL
VERTICAL
15.734 KHz
60Hz
15.625 KHz
50Hz
INPUT SIGNAL VIDEO
AUDIO
COMPOSITE VIDEO
MONO INPUT 400 mVrms
SOUND SIGNAL
OSD DISPLAY
USER CONTROLS
REGULATION
OPERATING TEMPERATURE
STORAGE TEMPERATURE
DIMENSION (W x H x D)
WEIGHT
ACCESSORIES
0.5WATT MAX
7 LANGUAGE
POWER, MODE, DIMMER
FCC, E-MARK
0C~+50C
oo
-25 C~ + 60 C
oo
150(W) x 115(H) x 30(D)
0.4Kg
REMOTE CONTROLLER (WITH BATTERY)
MONITOR CABLE ASS’Y
CIGARETTE LIGHTER ADAPTOR(FUSE 2A)
STAND ASS’Y
1
1
1
1
■MONITOR CM-505 ■CAMERA CM-32AH
Input Voltage
Camera Weight
Operating Temperature
Minimum illumination
Dimension
Accessories
-10℃ to + 55℃ (+14℉ to +131℉)
70(W) X 44(H) X 57(D)mm
0.4Kg(0.88lbs) including bracket
0.01LUX
2.7(W) X 1.7(H) X 2.2(D)inch
DC 12V/200mA Max
Camera Bracket
Adhesive tape
Sun Visor
Machine screw(Ass'y)(PH) M3x8
Tapping screw(TH)4x10
Machine screw(PHW) M3x6
Spring washer(M3)
Insulation tape
Spring washer(M4)
Extension cable
Pick-up device NTSC
PAL
View of angle
1/3" 290,000 pixels COLOR CCD
1/3" 250,000 pixels COLOR CCD
120 degree diagonal
1
1
1
4
2
3
2
3
1
1

CX-100
2.4GHz Transmitter/Receiver for
CAMOS Rear View Systems
Manual
Ver.1.1
•Set consisting of transmitter and receiver
•Wireless transmission of video and audio signal
in a frequency range of 2,4 GHz
•4 channels switchable
•Easy connection to CAMOS-rear view systems and cameras
•Easy installation
•system is automatically activated when using reverse gear

2
Installation
Usually the transmitter and receiver module must be mounted inside the
vehicle.
The transmitter should be attached as high as possible in the rear of the
vehicle. It can simply be fixed by screw or the enclosed adhesive/Velcro
tape.
The receiver should be installed, if possible, in the same high like the
transmitter, for example on the dashboard close to the monitor.
To achieve best transmission, you should avoid obstacles (walls, persons,
etc.) between transmitter and receiver.
Metallic barriers may completely impede the transmission; in this case you
have to change the position of the modules.
Using a (camping) trailer, the receiver can be installed in the rear of the
vehicle (if coverage is insufficient).
In this case the receiver module must be connected to the monitor with an
additional extension cable (available from specialized dealers).
Due to technical factors it is possible that the range of the video signal is
higher than the range of audio signal - especially in threshold areas (noise,
interference).
In this case we would recommend to reduce the monitor's volume.
Receiver
Transmitte
r
Camera
Monito
r
Tail Light

3
Connections / Alignment
Receiver:
Connect the black cable of receiver module to the camera input of the
monitor. Concerning the other connections of the monitor, please see the
manual of rear view system.
Transmitter:
Connect the camera cable to the cable of the transmitter module.
Pls pay attention that the marker (arrow) on the plug and jack correspond.
Connect the black cable to ground (-), the red cable to the positive pole of
the tail light. Please use the enclosed extension cable (red/black).
Switch on both units (transmitter and receiver).
Once changed to reverse, the rear view system automatically turns on.
Setting up the radiochannels
In case of interferences during the transmission you should select another
channel:
Switch off both units. Use a small screw driver, a ball-pen or similiar
to position the DIP switches as you see below (push them carefully up resp.
down). You have to effect the settings both at the transmitter and the
receiver. In the following switch on the modules again.
channel 1 channel 2 channel 3 channel 4
DIP switches Control lam
p
On/Off switch

4
Technical Data
Frequency Range 2,4 GHz
Chanels 4 (2,414/2,432/2,450/2,468 GHz)
Power Output 10mW
Video Signals PAL/NTSC
Coverage approx.30 - 40m (outdoor, without
obstacles)
Power Supply 12 Volt DC (typ)
Weight ca. 200g
Dimensions 95mm(L) x 75mm(B) x 39mm(H)
Accessories (enclosed)
- Extension cable (red/black)
- Fastening screws
- 2 Sets adhesive/Velcro tape
This equipment complies with the essential requirements of EU Directive
1999/5/EC ; the radio link CX-100 is in conformity to standards:
EN 300 440 - 2, EN 301 489 - 1 - 3, EN 60950 and EN 50371.
The Radio Transmitter may be operatet in the following countries:
Germany, France, Great Britain, Netherlands, Italy, Austria,
Switzerland (incl. Liechtenstein), Belgium and Spain.
IMC GmbH • Carl-Zeiss-Str. 3 • 22946 Trittau
Tel. 04154 - 8083-0 • Fax 04154 - 8083-20
www.camos-mulltimedia.com.