Camos CM-562 User manual

5.6” TFT LCD COLOR MONITOR
CM-562
INSTRUCTION MANUAL
Thank you for choosing this product.
Please read this instruction manual carefully before
operating this product.
RECORD YOUR MODEL NUMBER (Now, while you can see it)
The model and serial number of your MONITOR are
located on the back of the cabinet. For your future convenience,
we suggest that you record these numbers here :
MODEL number :
SERIAL number :
Ver.1.1 PRINTED IN KOREA
Memo
5.6” TFT LCD COLOR MONITOR

32
Contents
5.6” TFT LCD COLOR MONITOR
1. Safety Rules
2. Before Use
3. Special Features of the product
4. Terms of part
5. Functions
6. Connections
7.
.
9. Specifications
Adapter cable for camera normal view
8Installation
3
6
7
8
9
13
14
15
12
1. Safety Rules
Please read the “Safety Rules”carefully before using this product. Following of the
safety rules prevents users from any damage related with the misuse of this product.
It is very important that users follow these safety rules. We state “Caution”and
“Warning”to clarify any potential for damage associated with misuse of the product.
About signs
Warning
Do not watch or operate the product while driving.
--- This may cause a major accident.
Do not place the product near the passenger-side airbag.
--- Airbags may not operate properly or may cause personal damage
and accident when accidentally opening.
Do not get product wet and operate with wet hands.
--- This may cause electric shock.
Do not use in bathtub. Do not pull the plug with wet hands.
--- This may cause electric shock.
Do not use unapproved power voltage.
This may cause fire or electric shock.---
Do not use unapproved Cigarette Lighter Adapter.
--- This may cause fire ,electric shock and/or malfunction.
Do not damage or bend electric cord. Do not place heavy objects
on electric cord.
--- This may cause fire from electric sparks.
Do not use damaged electric cord.
--- This may cause fire and/or electric shock.
Do not put pins or needles into the product or electric cord of product.
--- If this happens, stop the product operation immediately. Continuous use may
cause fire, electric shock and/or malfunction.
Warning May cause bodily harm or
even death if users ignore
warnings in the safety rules.
May cause bodily harm or
even death if users ignore
cautions in the safety rules.
Caution
“Precautions”
“Do not”
“Follow directions carefully”
Place the product where it doesn’t prevent the driver from driving.
--- The driver’s view of sight should not be blocked.

54
Do not attempt to open, disassemble or repair the product by any
person except an authorized service dealer.
--- This may cause electric shock and/or malfunction. You should request an
authorized service dealer for any inspection and repair of the product.
Do not place any containers with water or any small metal objects
on top of the product or nearby it.
--- Unplug the product when water or metal comes in contact with the product.
Continuous use may cause fire, electric shock and/or malfunction.
Stop using the product immediately when you drop it or damage the
outside shell.
--- Continuous use may cause fire, electric shock and/or malfunction.
Be careful when thunder and lighting occurs.
--- There is a danger of electric shock.
Do not use non-specified double socket and extended car battery cord.
--- This may cause excess heat and/or fire.
Caution
Do not put the product in a place where sudden temperature
increase occurs such as the vehicle’s dashboard.
Do not place the product where high temperature and/or the direct
ray of the sun occurs.
--- This may cause fire, electric shock and/or malfunction.
Do not put the product in an unstable place where the product may
be exposed to shock and/or impact.
--- The product may fall and be damaged.
Do not place electric cord near a heating product.
--- The cord surface may melt and cause fire and/or electric shock.
Do not press or drop LCD panel.
--- You should not give any shock on LCD panel because it may cause damage.
Always clean the cigarette lighter socket before using product.
--- Bad connection may cause fire.
Clean electric socket area often.
--- Dust in the area may cause fire.
Keep electric cord properly positioned.
--- An improperly positioned electric cord may cause fire or electric shock when
metal material is in contact with the power source.
Unplug the product and remove cords when moving.
--- It may damage cords and cause fire and/or electric shock.
The car engine should be running when you use the product in a car.
Without the engine running, you may have excessive discharge of the car battery.---
Do not pull the cord line when you unplug it.
--- Damaged cords may cause fire and/or electric shock.
Do not watch Monitor for a long period of time.
--- This may damage your eyesight.
Hold the plug when you unplug the product. Put a battery in the remote
control properly with +, - signs as directed in this manual.
--- Improper use of batteries may cause fire and/or damage.
Unplug the product when you don't use it for a long period of time.
--- Insulation may cause electric shock, electric leak and/or fire.
Unplug the product when you clean or care for it.
--- Not unplugging product may cause electric shock.
If you find any strange occurrences or malfunction in the product or any foreign
substance gets into the product, please contact the authorized retailer where you
purchased the product.
When you transport the product, remove all cords and do not give any
shock.
--- This may cause a malfunction.
Do not place volatile materials such as insecticides on the product.
The product should not come in contact with rubber or vinyl for a long period
of time.
--- The surface of the product may change and paint may peel off.
Do not use the product in the following locations.
---This may cause malfunction.
In direct rays of the sun and near heating products
High in humidity and with bad ventilation
Dusty or oily locations
Low temperatures
Unstable environment
=
=
=
=
=
=

76
2. Before Use 3. Special Features of the product
=The driver should not use the product while he/she is driving.
=Quality of pictures on screen may vary depending on the radio field strength in
different locations. You should use video equipment where you experience weak
radio field strength.
=Follow traffic laws when you use the Navigation Route System.
=Be cautious of humidity and shock when you use the product in a car.
=The product should not be placed on the dashboard or near engine
=Cover the product when exposed to direct rays of the sun for a long period of time.
(You should keep the product at a temperature range of -20 ~ 70 .)
oo
CC
Precautions (when you use the product in a car)
=
=
=
=
=
=
=
=
=
To safely use the product, please read the user’s manual carefully before use.
Connect all lines as directed in the product connection map in the manual.
Do not touch the LCD panel.
Use the product at the temperature range of -10 ~60 .
Screen may be a little dark when the product is operated in low temperature areas.
Screen will show normal luminosity after a few minutes.
Do not disassemble and modify the product in any way.
This may cause fire and/or electric shock.
When you install the product in a car, do not set a volume level too loud for others
to hear outside.
When you install the product in a car and watch monitor, the car engine should be
running as there might occur excessive discharge of the car battery.
Any liquid leaking into product may cause malfunction.
oo
CC
日本語
=Application of 8bit MICRO CONTROLLER
=Application of TFT LCD with high resolution and low reflection
=All functions are displayed on screen (OSD function)
=PWM volume control
=Mode selection function
=Low energy consuming rate
=Language Display Selection
(ENGLISH- - -FRANCAIS- - - )DEUTSCH ITALIANO ESPAnON 한국어
=1 Cable solution
=Free voltage (From DC 12V to DC24V)
=Dimmer selection function

98
4. Terms of part
① POWER ON/OFF button
② MODE
③ MENU
④ UP
⑤ DOWN
⑥ S/BY LED
SETUP/ PICTURE selection function
Displays STAND BY
①
②
③
④
⑤
⑥
CAM1 / CAM2 / AV selection function
SOUND/ MENU level control
5. Functions
POWER
ON OFF Push POWER button to on the power.
(STAND BY state is OFF)
Push POWER button again to off the power.
①
②
①
Push MODE button.
ON/OFF KEY
MODE
It is a function to change video signal.
The display is disappeared 5second later after setting.
②
CAM1 / CAM2 / AV appears on the screen and it is disappeared after 5 seconds.
CAM1
UP, DOWN
3
70
VOLUME
①Press UP
②The monitor shows volume on the
screen and volume is up.
①Press DOWN
②The monitor shows volume on the
screen and volume is down.
30
VOLUME

1110
MENU
4
This button is for SETUP, PICTURE USER ■
STEUP
PICTURE
② Use MODE button to select SUB MENU, use UP/ DOWN button to change SUB MENU.
=DIMMER
=LANGUAGE
ENGLISH DEUTSCH ITALIANO
한국어
日本語
=DIRECTION
1. SETUP
①Use MENU button to change MAIN MENU, changed color in red when it is selected.
=RESET ▶
A factory default reset will clear all of OSD information
2. PICTURE
①
(
②
Use MODE button to select
CONTRAST, BRIGHTNESS, COLOR, TINT MENU.
Selected menu is in red)
Push button, and BAR and number are
changed and screen is adjusted. (BAR sign is in red)
UP/ DOWN
ESPAnON
FRANCAIS
LANGUAGE
DIRECTION
RESET
DIMMER
ENGLISH
0˚
▶
BRIGHTNESS
COLOR
TINT
CONTRAST
40
40
40
40
LANGUAGE
DIRECTION
RESET
DIMMER
ENGLISH
0˚
▶
LANGUAGE
DIRECTION
RESET
DIMMER
ENGLISH
180˚
▶
BRIGHTNESS
COLOR
TINT
CONTRAST
40
40
40
70
BRIGHTNESS
COLOR
TINT
CONTRAST
70
40
40
40
BRIGHTNESS
COLOR
TINT
CONTRAST
40
40
70
40
BRIGHTNESS
COLOR
TINT
CONTRAST
40
50
40
40
Please choose the setting of the menu with the Mode button and adjust the setting with the
Up/Down button.

CAMERA 1, 2 / AV1
6. Connections
12 13
BLACK (CAMERA 1, Priority) GREEN ( )CAMERA 2
FOR REAR VIEW
Connect this line to “+” of reverse light lamp.
FOR SIDE VIEW
Connect this line to “+” of side light lamp.
DC INPUT
CAMERA 1
BLACK (CAMERA 1) GREEN (CAMERA 2)
CAMERA 2
VIDEO
AUDIO
Camera 1(Not Supplied)
CIGARETTE LIGHTER
ADAPTOR CIGARETTE LIGHTER
SOCKET IN
MDM-026A
Camera 2(Not Supplied)
Camera connector
Camera 1
(optional)
Camera 2
(optional)
MDM-026A
(supplied)
The monitor also includes an extra adapter cable (DDC-019A) to change from mirror
to normal view.
To use this function, please connect the cable as described in the drawing below between
the multi function cable of the monitor and the camera.
7. Adapter cable for camera normal view
MDM-026A
(Supplied)

1514
8. Installation
Control Knob
(Angle)
Fix Knob
(Bracket)
Tapping screew
Safeguard tape
Stand Base
Cable Guidance
■Monitor Cable Connection
※ Cable Guidance use ※ Normal Connection
9. Specifications
I T E M SPECIFICATION
NTSC PAL
PANEL
SCREEN SIZE
NUMBER OF PIXELS
DOT PITCH
BRIGHTNESS
DISPLAY AREA
CONTRAST RATIO
VIEW ANGLE(H/U/D)
5.6 INCH(14.22cm)
320(W) x 3(RGB) x 234(H)
0.118(W) x 0.362(H) mm
350 cd/ｧ
113.28(W) x 84.7(H) mm
300:1
｡65deg / 45deg / 65deg
POWER SUPPLY VOLTAGE
CURRENT
DC 12V - 24V
450mA (DC 12V, MONITOR SET ONLY)
REAR INPUT POWER DC 12V - 24V
INPUT SYSTEM AUTO (NTSC/PAL)
FREQUENCY HORIZONTAL
VERTICAL
15.734 KHz
60Hz
15.625 KHz
50Hz
INPUT SIGNAL VIDEO
AUDIO
COMPOSITE VIDEO 1Vp-p (75ohm)
MONO INPUT 400 mVrms
SOUND SIGNAL
OSD DISPLAY
USER CONTROLS
0.5WATT MAX
7 LANGUAGE
POWER, MODE, MENU, UP, DOWN
Caution: The design and specifications of this product in order to improve its quality may be changed without notice.
OPERATING TEMPERATURE
STORAGE TEMPERATURE
DIMENSION (W x H x D)
WEIGHT
ACCESSORIES
oo
-10 C~ + 60 C
oo
-20 C~ + 70 C
163(W) x 112(H) x 30(D)
0.3Kg
MONITOR CABLE ASS’Y
CIGARETTE LIGHTER ADAPTOR(FUSE2A)
STAND ASS’Y
1
1
1