Camos MM-1510D User manual

INSTRUCTION MANUAL
15”/17”/19” DIGITAL TFT LCD COLOR MONITOR
Thank you for choosing this product.
Please read this instruction manual carefully before
operating this product.
MM-1510D/MM-1710D/MM-1910D

Contents
1. Safety Rules
2.
3.
4. Terms of part
5. Remote Control
6. Functions
7. Connections
8
9
Before Use
Special Features of the product
. Specifications
. Changing Remote Control Battery
3
8
10
11
12
14
24
26
32
1. Safety Rules
Please read the Safety Rules carefully before using this product. Following of the safety rules prevents users from any damage
related with the misuse of this product.
It is very important that users follow these safety rules. We state Caution and Warning to clarify any potential for damage
associated with misuse of the product.
“”
“”“ ”
About signs
“Do not”
Warning May cause bodily harm or even death if users ignore
warnings in the safety rules.
May cause bodily harm or even death if users ignore
cautions in the safety rules.
Caution
“Precautions”
“Follow directions carefully”
Warning
Place the product where it doesn’t prevent the driver from driving.
--- The driver’s view of sight should not be blocked.
Do not watch or operate the product while driving.
--- This may cause a major accident.
Do not place the product near the passenger-side airbag.
--- Airbags may not operate properly or may cause personal damage
and accident when accidentally opening.
Do not get product wet and operate with wet hands.
--- This may cause electric shock. 3

Do not use in bathtub. Do not pull the plug with wet hands.
--- This may cause electric shock.
--- This may cause fire or electric shock.
Do not use unapproved power voltage.
Do not use unapproved Cigarette Lighter Adapter.
--- This may cause fire ,electric shock and/or malfunction.
Do not damage or bend electric cord. Do not place heavy objects on electric cord.
This may cause fire from electric sparks.---
--- This may cause fire and/or electric shock.
Do not use damaged electric cord.
Donotputpinsorneedlesintotheproductorelectriccordofproduct.
--- If this happens, stop the product operation immediately. Continuous use may cause fire, electric shock and/or malfunction.
Do not place any containers with water or any small metal objects on top of the product or nearby it.
--- Unplug the product when water or metal comes in contact with the product. Continuous use may cause fire,
electric shock and/or malfunction.
Stop using the product immediately when you drop it or damage the outside shell.
--- Continuous use may cause fire, electric shock and/or malfunction.
Be careful when thunder and lighting occurs.
--- There is a danger of electric shock.
Do not use non-specified double socket and extended car battery cord.
---Thismaycauseexcessheatand/orfire.
--- This may cause electric shock and/or malfunction. You should request an authorized service dealer for any inspection and
repair of the product.
Do not attempt to open, disassemble or repair the product by any person except an authorized service dealer.
Caution
Do not place the product where high temperature and/or the direct ray of the sun occurs.
--- This may cause fire, electric shock and/or malfunction.
Do not put the product in an unstable place where the product may be exposed to shock and/or impact.
--- The product may fall and be damaged.
Do not place electric cord near a heating product.
--- The cord surface may melt and cause fire and/or electric shock.
Do not press or drop LCD panel.
--- You should not give any shock on LCD panel because it may cause damage.
Always clean the cigarette lighter socket before using product.
--- Bad connection may cause fire.
Clean electric socket area often.
--- Dust in the area may cause fire.
Keep electric cord properly positioned.
--- An improperly positioned electric cord may cause fire or electric shock when metal material is in contact with the power source.
Do not put the product in a place where sudden temperature increase occurs such as the vehicle’s dashboard.
45

Do not place volatile materials such as insecticides on the product. The product should not come in contact with rubber
orvinylforalongperiodoftime.
--- The surface of the product may change and paint may peel off.
When you transport the product, remove all cords and do not give any shock.
--- This may cause a malfunction.
Do not watch Monitor for a long period of time.
--- This may damage your eyesight.
Unplug the product when you clean or care for it.
--- Not unplugging product may cause electric shock.
Unplugtheproductwhenyoudon'tuseitforalongperiodoftime.
--- Insulation may cause electric shock, electric leak and/or fire.
Hold the plug when you unplug the product. Put a battery in the remote control properly with +, - signs as directed
in this manual.
--- Improper use of batteries may cause fire and/or damage.
Do not pull the cord line when you unplug it.
---Damaged cords may cause fire and/or electric shock.
The car engine should be running when you use the product in a car.
--- Without the engine running, you may have excessive discharge of the car battery.
Unplug the product and remove cords when moving.
--- It may damage cords and cause fire and/or electric shock.
If you find any strange occurrences or malfunction in the product or any foreign
substance gets into the product, please contact the authorized retailer where you
purchased the product.
---
Do not use the product in the following locations.
This may cause malfunction.
In direct rays of the sun and near heating products
High in humidity and with bad ventilation
Dusty or oily locations
Low temperatures
Unstable environment
=
=
=
=
=
=
67

2. Before Use
To safely use the product, please read the user’s manual carefully before use.=
=Any liquid leaking into product may cause malfunction.
=When you install the product in a car and watch monitor, the car engine should be running as there might occur
excessive discharge of the car battery.
=When you install the product in a car, do not set a volume level too loud for others to hear outside.
=Do not disassemble and modify the product in any way. This may cause fire and/or electric shock.
=Screen may be a little dark when the product is operated in low temperature areas. Screen will be shown normal
luminosity after a few minutes.
=Use the product at the temperature range of 0 C ~ 50 C .
OO
=Do not touch the LCD panel.
=Connect all lines as directed in the product connection map in the manual.
=Cover the product when exposed to direct rays of the sun for a long period of time.
(You should keep the product at a temperature range of -20 ~ 60 .)℃℃
=The product should not be placed on the dashboard or near engine
=Be cautious of humidity and shock when you use the product in a car.
=Follow traffic laws when you use the Navigation Route System.
=Quality of pictures on screen may vary depending on the radio field strength in different locations.
You should use video equipment where you experience weak radio field strength.
=The driver should not use the product while he/she is driving.
Precautions (when you use the product in a car)
89

3. Special Features of the Product
=
=
=
=
=
=
=
=
=
=
=
Applied high resolution and low reflection DIGITAL TFT LCD
All electronic control functions
Convenient Graphic OSD
System auto recognition function(PAL/ NTSC/ AUTO)
PC auto adjustment
7 Languages display
(English, French, German, Spanish, Italian, Japanese, Korean)
MODE selection function(DSUB ANALOG, DVI DIGITAL, AV, S-VIDEO)
STAND BY Function
All functions are displayed on screen (OSD function)
One-touch Dimmer(Remote control)
Low Power consumption
4. Terms of part
MODE
MENU
SELECT
▼▲
ADJUST
◀▶ S/BY POWER
②S/BY LED Displays STAND BY and ON/OFF
⑦MENU Selects menu and changes function.
④MODE DSUB ANALOG / DVI DIGITAL / AV
/ S-VIDEO button.selection
①POWER Power ON/OFF button.
10 11
①②③④⑤⑥⑦
③REMOTE SENSOR Sensor for receiving signal from
the remote control.
⑤ADJUST ◀▶ Button to level control.
⑥SELECT ▼▲ Button to select Menu and M .ode

5. Remote Control
POWER TV/AV
RECALL SLEEP
MUTE AUTO
PIC
PICTURE SETUP SOUND
A.MEMO. CH.SET
123
456
789
0
CH
CH
VOL VOL
MENU
①②
③④
⑥
⑤
⑦
⑧
⑨
⑪
⑩
⑫
⑬
⑮
⑭
12 13
external video, s-video, DVI, DSUB analog
①POWER Power ON/OFF Key
②TV/AV
⑫SOUND
⑬0~9KEY
⑭A.MEMO.
⑮CH.SET
Setup selection button
③RECALL
④SLEEP
⑤MENU
⑥◀▶VOL
⑦▼▲CH
⑧AUTO PIC
⑨MUTE
⑩SETUP
⑪PICTURE
Displays present status
Selects menu and changes function
Controls Volume and changes MENU level
Selects channel and moves to MENU
Selects DYNAMIC, NORMAL, MILD, USER for PICTURE
Picture selection button
No use button

6. Functions
POWER (POWER)
※( ), it means a remote control button.
①
②
Push POWER(POWER) button POWER is on..
Push POWER (POWER) button again. POWER is OFF.
MODE(TV/AV)
=DSUBIt is function to change external video signals to ANALOG/ DVI/ VIDEO/ S-VIDEO
AV/ S-VIDEODSUB ANALOG/ DVI DIGITAL/
2
1
=POWER ON/OFF KEY
MENU (MENU)
3
DSUB ANALOG
DVI DIGITAL
AV
S-VIDEO
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
SYSTEM AUTO NTSC PAL
PICTURE(PICTURE)
①BRIGHTNESS Adjust the brightness of video without affecting RGB’s brightness.
※Press MENUbuttontogototheMainmenu.
MENU
②CONTRAST Adjust the contrast of video without affecting RGB’s contrast.
③SHARPNESS Adjust the sharpness of video image.
④COLOR TINT Change the richness of color.
⑤COLOR TONE Change the tone of color.
Change broadcast system NTSC, PAL, AUTO
⑥SYSTEM
AV1/ AV2 (OPTION)DSUB ANALOG/ DVI DIGITAL/
AV/ S-VIDEO
55
40
14
60
※▶,With VOL go to SUB MENU. After adjusting in SUB MENU,
pressMENUtoexit.
15
14
DSUB ANALOG
DVI DIGITAL
AV1
AV2
(Option)
※▲▼Adjust it with CH

SETUP(SETUP)
LANGUAGE
OSD TIME
OSD H POS.
OSD V POS.
FACTORY RESET
▶ENGLISH
OFF
①LANGUAGE Change language English, German , Italian, Japanese, Korean., , SpanishFrench
②OSD TIME The number of seconds that the OSD will remain visible before disappearing.
③TRANSLUCENT Change the opaqueness of the background of the OSD.
④OSD H POS. Move the OSD Window to the horizontal direction.
⑤OSD V POS. Move the OSD Window to the vertical direction.
⑥FACTORY RESET A factory default reset will clear all of OSD information.
TRANSLUCENT
※Press MENU button to go to the Main menu.
MENU
10
14
※▶,With VOL go to SUB MENU. After adjusting in SUB MENU,
press MENU to exit.
17
16
PICTURE
BRIGHTNESS
CONTRAST
H POSITION
V POSITION
PHASE
PIXEL FREQ.
Adjust the brightness of video without affecting RGB s brightness.
①BRIGHTNESS
Adjust the contrast of video without affecting RGB s contrast.
②CONTRAST
Adjust the horizontal position of the image.
③H POSITION
Adjust the vertical position of the image.
④V POSITION
Remove the noises. When phase value is wrong, the image has vertical lines especially in 1 dot on and off.
⑤PHASE
Adjust the sampling frequency of DSUB analog signal.
⑥PIXEL FREQ.
※Press MENU button to go to the Main menu.
MENU
PC (ANALOG)
75
50
14
100
※▶,With VOL go to SUB MENU. After adjusting in SUB MENU,
press MENU to exit.

RED
GREEN
BLUE
The tone of color can be changed from red-dish white to bluish white.
The individual color components are also user customizable.
COLOR
①9300K Change color temperature : Red 42 Green 52 Blue 50
②7300K Change color temperature : Red 51 Green 46 Blue 46
③6500K Change color temperature : Red 40 Green 54 Blue 54
④USER User customizable. (RED, GREEN, BLUE)
※Press MENU button to go to the Main menu.
MENU
USER
※▶,With VOL go to SUB MENU. After adjusting in SUB MENU,
press MENU to exit.
19
18
PICTURE
BRIGHTNESS
CONTRAST
H POSITION
V POSITION
PHASE
PIXEL FREQ.
Adjust the brightness of video without affecting RGB s brightness.
①BRIGHTNESS
※Press MENU button to go to the Main menu.
MENU
PC (DVI)
75 ※▶,With VOL go to SUB MENU. After adjusting in SUB MENU,
press MENU to exit.

21
20
DISPLAY MODES (MM-1510D)
Mode Resolution Horizontal
F equency(KHz)r
Vertical
F equency(Hz)r
Pixel Clock
F equency(MHz)r
Sync Polarity
(H/V)
VGA
720 x 400 31.469 70.087 28.322 - / +
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.500 75.000 31.500 -/-
+/+
40.00060.300
37.880
800 x 600
+/+
49.500
75.000
46.875
800 x 600
-/-
65.000
60.004
48.363
1024 x 768
+/+
78.750
75.029
60.023
1024 x 768
SVGA
XGA
For the display modes listed below, the screen image has been optimized during manufacture.
DISPLAY MODES (MM-1710D/MM-1910D)
Mode Resolution Horizontal
F equency(KHz)r
Vertical
F equency(Hz)r
Pixel Clock
F equency(MHz)r
Sync Polarity
(H/V)
VGA
720 x 400 31.469 70.087 28.322 - / +
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.500 75.000 31.500 -/-
+/+
40.00060.300
37.880
800 x 600
+/+
49.500
75.000
46.875
800 x 600
-/-
65.000
60.004
48.363
1024 x 768
+/+
78.750
75.029
60.023
1024 x 768
+/+
108 000
.
60.02
63.981
1280 x 1024
+/+
135 000
.
75.025
79.976
1280 x 1024
SVGA
XGA
For the display modes listed below, the screen image has been optimized during manufacture.
SXGA

23
22
RECALL Displays present status and volume level.
4
AUTO PIC Selects DYNAMIC, NORMAL, MILD, USER for PICTURE
5
6TV/AV Select, external video, s-video.D-sub analog, DVI,
OUT OF RANGE ①The screen shows this when signal is out of range
②The screen shows when there is no signal.this
NO SIGNAL
③The screen shows when the signal cable is not connected.this
CHECK CABLE
OSD MESSAGE
10

25
24
7. Connections
Backside monitor stand detached
(without monitor stand distance between each mounting hole 75mm)
,
/
①PC-AUDIO IN Audio input DSUB ANALOG,
DVI DIGITAL mode
②DVI IN DVI DIGITAL input
③DSUB IN
④MULTI CONNECTOR
⑤DC IN 12V
DSUB ANALOG input
DC12V,VIDEO,S-VIDEO input
DC 12V Input
①②③④⑤
REMOTE OUT
RED (DC INPUT) YELLOW (VIDEO 1)
S-VIDEO
PC
MM-1510D/MM-1710D/MM-1910D
PC-AUDIO
(Not Supplied)
DVI
D-SUB
~
~
YELLOW (VIDEO 2)
Option
AC/DC SMPS
12V, 5A (option)

27
8. Specifications
38.0cm (15.0 INCH)
SIZE
300:1
CONTRAST RATIO
LCD PANEL
70 70 60 65 (L/R/U/D)˚/ ˚/ ˚/ ˚
VIEW ANGLE CR≥10
16.2M
DISPLAY COLOR
450cd/㎡
BRIGHTNESS
0.297(H) X 0.297(V)mm
PIXEL PITCH
1024 X 768
NUMBER OF PIXELS
ANALOG R.G.B 0.7Vp-p, TTL SEPARATE (D-SUB)
COMPOSITE VIDEO (VHS)
DIGITAL SIGNAL (DVI)
S-VIDEO (SVHS)
VIDEO
INPUT SIGNAL
MM-1510D
ITEM SPECIFICATION
30~60KHz
56~75 Hz
HORIZONTAL
VERTICAL
FREQUENCY
26
POWER, MODE, ADJUST SELECT , MENU▼▲◀▶,
S/BY LED, REMOTE SENSOR
7 LANGUAGES
DC11-16V (AT 12V)
30WATT(AT12VDC)
CONSUMPTION
VOLTAGE
OSD DISPLAY LANGUAGES
USER CONTROLS
POWER SUPPLY
356(W) X 289(H) X 40.5(D)mm
MONITOR CABLE
-20 C~ + 60 C
oo
4.5Kgf
DIMENSION(WXHXD)
STORAGE TEMPERATURE
ACCESSORIES
WEIGHT
-------------------- ---------------------------- 1
0C~+50C
oo
OPERATING TEMPERATURE
CHANGE CABLE OPTION)(
REMOTE CONTROL (WITH BATTERY) --------------------1
AC/DC POWER ADAPTER (OPTION)
VESA STAND OPTION)(
ITEM SPECIFICATION
* Design and specifications are subject to change without notice.

28
43.18cm (17.0 INCH)
SIZE
500:1
CONTRAST RATIO
LCD PANEL
75 75 75 60 (L/R/U/D)˚/ ˚/ ˚/ ˚
VIEW ANGLE CR 5≥
16.2M
DISPLAY COLOR
300cd/㎡
BRIGHTNESS
0.264(H) X 0.264(V)mm
PIXEL PITCH
1280 X 1024
NUMBER OF PIXELS
ANALOG R.G.B 0.7Vp-p, TTL SEPARATE (DSUB)
COMPOSITE VIDEO (VHS)
DIGITAL SIGNAL (DVI)
S-VIDEO (SVHS)
VIDEO
INPUT SIGNAL
MM-1710D
30~80KHz(AUTOMATIC)
56~75 Hz(AUTOMATIC)
HORIZONTAL
VERTICAL
FREQUENCY
ITEM SPECIFICATION
29
POWER, MENU, SELECT, ,▼▲ ◀▶
S/BY LED, REMOTE SENSOR
7 LANGUAGES
DC11-16V (AT 12V)
36WATT
CONSUMPTION
VOLTAGE
OSD DISPLAY LANGUAGES
USER CONTROLS
POWER SUPPLY
389(W) X 331(H) X 48(D)mm
-20 C~ + 60 C
oo
5.5Kgf
DIMENSION(WXHXD)
STORAGE TEMPERATURE
ACCESSORIES
WEIGHT
0C~+50C
oo
OPERATING TEMPERATURE
MONITOR CABLE
CHANGE CABLE OPTION)(
REMOTE CONTROL (WITH BATTERY)
AC/DC POWER ADAPTER (OPTION)
VESA STAND OPTION)(
ITEM SPECIFICATION
-------------------- ---------------------------- 1
--------------------1
※Design and specifications are subject to change without notice.

30 31
48.24cm (19.0 INCH)
SIZE
500:1
CONTRAST RATIO
LCD PANEL
85 85 85 85 (L/R/U/D)˚/ ˚/ ˚/ ˚
VIEW ANGLE CR 5≥
16.2M
DISPLAY COLOR
250˚
BRIGHTNESS
0.294(H) X 0.294(V)mm
PIXEL PITCH
1280 X 1024
NUMBER OF PIXELS
ANALOG R.G.B 0.7Vp-p, TTL SEPARATE (DSUB)
COMPOSITE VIDEO (VHS)
DIGITAL SIGNAL (DVI)
S-VIDEO (SVHS)
VIDEO
INPUT SIGNAL
MM-1910D
30~80KHz(AUTOMATIC)
56~75 Hz(AUTOMATIC)
HORIZONTAL
VERTICAL
FREQUENCY
ITEM SPECIFICATION
POWER, MENU, SELECT, ,▼▲ ◀▶
S/BY LED, REMOTE SENSOR
7 LANGUAGES
DC11-16V (AT 12V)
36WATT
CONSUMPTION
VOLTAGE
OSD DISPLAY LANGUAGES
USER CONTROLS
POWER SUPPLY
435(W) X 368(H) X 49(D)mm
-20 C~ + 60 C
oo
6.0Kgf
DIMENSION(WXHXD)
STORAGE TEMPERATURE
ACCESSORIES
WEIGHT
0C~+50C
oo
OPERATING TEMPERATURE
MONITOR CABLE
CHANGE CABLE OPTION)(
REMOTE CONTROL (WITH BATTERY)
AC/DC POWER ADAPTER (OPTION)
VESA STAND OPTION)(
ITEM SPECIFICATION
-------------------- ---------------------------- 1
--------------------1
※Design and specifications are subject to change without notice.

32
MEMO
9. Changing Remote Control Battery
1. Slide and open the battery cover.
2. Insert new battery and ensure that the
polarities are correct when inserting.
3. Slide and close the battery cover.

MEMOMEMO

Printed in KOREA
MEMO