Camos MM-1750H User manual

MM-1750H / MM-1950H / MM-2250H
WIDE TFT LCD COLOR MONITOR
series (17”, 19”, 22”)
INSTRUCTION MANUAL
PRINTED IN KOREA* Design and specifications are subject to change without notice. ver. 1.0
Thank you for purchasing this product.
For proper usages and application,
Please read this instruction manual thoroughly.

2
TABLE OF CONTENTS
SAFEGUARD INSTRUCTIONS
FEATURE
BOX CONTENTS
FUNCTION OF EACH PART
OPERATION
1. SCREEN ON/OFF
2. VOLUME CONTROL
3. MODE
4. MENU
5. FUNCTION OF REMOTE CONTROL
6. OSD MESSAGE
7. SUPPORTED DISPLAY MODE
CONNECTION
CHANGING REMOTE CONTROL BATTERY
SPECIFICATIONS
............................................................................ 3
....................................................................................................................... 5
........................................................................................................ 5
.................................................................................. 6
................................................................................................................. 8
............................................................................................... 8
........................................................................................ 8
..................................................................................................................... 8
..................................................................................................................... 9
..................................................... 13
............................................................................................... 14
................................................................. 14
.......................................................................................................... 15
............................................... 16
.................................................................................................... 17

3
SAFEGUARD INSTRUCTIONS
WARNING
This information is for preventing bodily harm or even death and use
should follow this safety rules.
Please read the “Safety Rules” carefully before using this product. Following the safety rules pre-
vents users from damages related with the misuse of the product. It is very important to follow
these safety rules. We state “Caution” and “Warning” to clarify any potential risk for a damage as-
sociated with the misuse of the product.
This information is for preventing damage or shorten the life time
of the products.
CAUTION
CAUTION
Should install while power o. (After install products, connect DC jack)
- It may cause to electronic shock or malfunction.
The battery for remote controller is not rechargeable and should replace same or simi-
lar model. Used battery may cause environmental pollution, so trash it carefully.
- This may cause a malfunction and problem.
Before install the body, take enough place at least more than 15cm from the wall to
emit heat.
In case of inserting battery, attend to polarity and insert according to direction.
- When wrong inserting, it may cause re, damage by explsion.
Do not push a LCD panel.
- It may cause LCD broken.
Do not place near magnet.
- It may cause malfunction and trouble.
Unplug product when do not use for a long time.
- It may case re by short circuit due to heating.
Do not use multi socket or extended adaptor.
- It may cause unexpected heating, re and malfunction.
While stop driving (parking), set the car in motion.
- It may cause battery discharge.

4
Do not disassemble, repair and remodeling.
- It may cause malfunction and injury, can not get warranty.
- Make inquiries to agent for repair and checkup.
Do not use in problem condition as like smoking, smell something burn.
- It may cause re. Stop to use and make inquiries to agency.
Do not put metals as like pin and needle into hole and chink of grill, speaker.
- In case of inserting them, stop to operate, it may cause electronic shock, re and
malfunction.
Do not place where vibration and shock.
- It may cause throw down and then malfunction and accident.
When clean exterior, power o and wipe with dry cloth.
- Wet cloth may cause a electronic shock.
Do not clean exterior with volatility or oily solvent.
Neither keep touching rubber and plastic for long time.
- It may cause change of surface, fall of paint, malfunction and re.
Keep clean dust on power socket.
- It may cause electronic shock and re by bad connection.
Do not pull cord with a jerk, should catch a plug and pull. Do not use damaged cord.
- It may cause cord malfunction, electronic shock and re.
Do not place near of air bag eective range.
- It may cause malfunction of air bag or accident, injury due to hitting monitor by
air bag.
Do not put the product in place where sudden temperature increasing and should use
on optimum voltage, temperature and humidity.
- It may cause to electronic shock or malfunction.
Do not get product wet and operate with wet hands.
- It may cause to electronic shock or malfunction.
WARNING

5
FEATURE
1
• Digital TFT Wide LCD with high resolution and low reflection
• All electronic control functions
• All functions are displayed on screen (OSD function)
• Auto recognition function of Video Signal system (PAL / NTSC / AUTO)
• 7 languages on OSD menu (ENG-FRA-DEU-ESP-ITA-JPN-KOR)
• Mode selection (HDMI - AV1 - AV2)
• Built-in speaker (3Watt x 2)
• Low power consumption
BOX CONTENTS
2
Monitor Remote Control Monitor Cable Instruction Manual
HDMI Cable AC / DC SMPS Power Cable Cigar Cable
* BASIC CONTENTS
* OPTION
Stand

6
FUNCTION OF EACH PART
3
1. LCD SCREEN
2. SPEAKER
3. MENU
4. SELECT
5. ADJUST
6. MODE
7. REMOTE SENSOR
8. STAND-BY LED
9. POWER
LCD SCREEN
STEREO SPEAKER (3W x 2)
Selecting menu and changing function
Button to select menu and mode
Adjusting menu level or volume
Change mode (HDMI / AV1 / AV2)
Sensor for receiving signal from the remote control
Displays stand-by and ON/OFF
Power ON/OFF
MONITOR

7
REMOTE CONTROLLER
1. POWER
2. MODE
3. UP/DOWN
4. ADJUST/VOLUME
5. MENU
6. MUTE
7. RECALL
8. AUTO PIC
Power ON/OFF button
Change mode (HDMI - AV1 - AV2)
Moving up/down on menu
Adjusting menu level or volume
Selecting menu and changing function
Mute ON/OFF
Displaying the current mode and volume level
Auto screen setting (USER-DYNAMIC-NORMAL-MILD)

8
OPERATION
4
1. SCREEN ON/OFF
1. Press the POWER button on the monitor front or remote controller,
the screen turns on. Press the POWER button again, the screen turns
o.
2. If the power is connected, the S/BY LED is on. (to show power status)
When the screen is on, the S/BY LED is o.
3. MODE
1. Press the MODE button on the monitor front or remote control, the
mode changes. (HDMI - AV1 - AV2)
2. Select input mode and press the MENU button on the monitor front
or remote controller then mode is changed.
* A function to change external video signals to HDMI, AV1, AV2.
HDMI
AV1
AV2
SOURCE
HDMI
AV1
AV2
SOURCE
HDMI
AV1
AV2
SOURCE
2. VOLUME CONTROL
1.To control volume, press the adjust buttons(◀▶) on the monitor
front or volume button on the remote contoller. (0~100)
2.This function is not working on“NO SIGNAL”status.

9
PICTURE
SETUP
SOUND
- +
- +
50
50
BRIGHTNESS
CONTRAST
4. MENU
1. Press the MENU button on the monitor front or remote control,
the menu list is displayed. Press the MENU button again, it is disap-
peared.
2. Select a menu item by ▲▼ button on the monitor front or remote
controller, then press ▶button.
• HDMI mode
3. Adjust the value by pressing ◀▶ button, then press MENU button to x it.
* Menu item is variable depending on current output mode.
1. PICTURE
2. SETUP
LANGUAGE
OSD TIME
TRANSLUCENT
OSD H POS.
OSD V POS.
FACTORY RESET
PICTURE
SETUP
SOUND
- +
- +
- +
- +
10
0
50
50
▶ENGLISH
▶OFF
1) LANGUAGE
2) OSD TIME
3) TRANSLUCENT
4) OSD H POS.
5) OSDV POS.
6) FACTORY RESET
Change the OSD language. (ENG-FRA-DEU-ESP-ITA-JPN-KOR)
The number of seconds that the OSD will remain visible before disap-
pearing. (1~60sec.)
Change the opaqueness of the background of the OSD. (0~100%)
Move the OSD window to the horizontal direction.
Move the OSD window to the vertical direction.
A factory default reset will clear all of OSD information.
1) BRIGHTNESS
2) CONTRAST
Adjust the brightness of the screen.
Adjust the contrast of the screen.

10
3. SOUND
1) MUTE
2) VOLUME
3) TREBLE
4) BASS
Mute the sound temporarily. Mute is released when you adjust volume.
Adjust the sound volume.
Emphasize high frequency audio.
Emphasize low frequency audio.
PICTURE
SETUP
SOUND
MUTE
VOLUME
TREBLE
BASS
- +
- +
- +
10
50
50
▶OFF

11
PICTURE
SETUP
SOUND
- +
- +
- +
- +
- +
AUTO NTSC PAL
50
50
0
50
50
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR TINT
COLOR TONE
SYSTEM
LANGUAGE
OSD TIME
TRANSLUCENT
OSD H POS.
OSD V POS.
FACTORY RESET
PICTURE
SETUP
SOUND
- +
- +
- +
- +
10
0
50
50
▶ENGLISH
▶OFF
• AV mode
1. PICTURE
2. SETUP
1) BRIGHTNESS
2) CONTRAST
3) SHARPNESS
4) COLOR TINT
5) COLOR TONE
6) SYSTEM
Adjust the brightness of the screen.
Adjust the contrast of the screen.
Adjust the sharpness of the video image.
Change the richness of color.
Change the tone of color.
Change video signal system NTSC, PAL, AUTO.
1) LANGUAGE
2) OSD TIME
3) TRANSLUCENT
4) OSD H POS.
5) OSDV POS.
6) FACTORY RESET
Change the OSD language. (ENG-FRA-DEU-ESP-ITA-JPN-KOR)
The number of seconds that the OSD will remain visible before disap-
pearing. (1~60sec.)
Change the opaqueness of the background of the OSD. (0~100%)
Move the OSD window to the horizontal direction.
Move the OSD window to the vertical direction.
A factory default reset will clear all of OSD information.

12
PICTURE
SETUP
SOUND
MUTE
VOLUME
TREBLE
BASS
- +
- +
- +
10
50
50
▶OFF
3. SOUND
1) MUTE
2) VOLUME
3) TREBLE
4) BASS
Mute the sound temporarily. Mute is released when you adjust volume.
Adjust the sound volume.
Emphasize high frequency audio.
Emphasize low frequency audio.

13
5. FUNCTION OF REMOTE CONTROL
• MUTE
To clear mute mode, press mute button one
more or press volume button.
* This product has a function worked by only remote controller.
• AUTO PIC
If press AUTO PIC button on the remote controller, the screen is
changed as saved on memory.
The screen is changed [USER-DYNAMIC-NORMAL-MILD] by pressing
button.
* This function is not working on HDMI mode.
• RECALL
Display the current mode and volume level.
If press MUTE button on the remote controller, it turns mute mode and
there is an icon on right top side of screen.
HDMI
1280 x 720 60Hz
VOLUME 20
Current mode
(HDMI) Screen resolution
and refresh rate
Current volume

14
6. OSD MESSAGE
There is an error message as same as left one, when the setting
value of external device is not comparable with this monitor.
EX) Resolution, Refresh rate, etc.
OUT OF RANGE
NO SIGNAL There is a message as same as left one, when the external device is
not connected or power o status of external device.
After connecting this monitor and external device, power on the
external device.
7. Supported display mode
640 x 480
640 x 480
720 x 400
720 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 720
1280 x 720
1440 x 900
31.469
37.500
31.469
31.469
37.880
46.875
48.363
60.023
45.000
56.383
55.919
VGA
WVGA
SVGA
XGA
WXGA
WSXGA+
Resolution Horizontal
Frequency(KHz)
Mode
59.940
75.000
70.087
59.940
60.300
75.000
60.004
75.029
60.000
75.029
60.000
Vertical
Frequency(KHz)
* MM-1750H / MM-1950H
640 x 480
640 x 480
720 x 400
720 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 720
1280 x 720
1280 x 1024
1280 x 1024
1280 x 1024
1440 x 900
1920 x 540
1920 x 1080
VGA
480i
WVGA
480p
SVGA
XGA
WXGA
720p
SXGA
WSXGA+
1080i
1080p
Resolution Horizontal
Frequency(KHz)
Mode
31.469
37.500
31.469
31.469
37.880
46.875
48.363
60.023
45.000
56.383
64.000
74.600
80.000
55.919
33.750
67.500
59.940
75.000
70.087
59.940
60.300
75.000
60.004
75.029
60.000
75.029
60.000
70.000
75.000
60.000
60.000
60.000
Vertical
Frequency(KHz)
* MM-2250H

15
CONNECTION
5
EXTERNAL REMOTE SENSOR OUT
HDMI CONNECTOR
DC 12V, AV1, AV2
DC 12V input
VESA HOLE (75 x 75mm / 100 x 100mm)
1) REMOTE OUT
2) HDMI INPUT
3) MULTI CONNECTOR
4) DC IN 12V
5) VESA HOLE
AC/DC SMPS (OPTION)
12V, 5A
DC IN 12V
VIDEO 1 INPUT
AUDIO 1/R INPUT
VIDEO 2 INPUT
AUDIO 2/R INPUT
AUDIO 2/L INPUT
AUDIO 1/L INPUT
MONITOR
CABLE
HDMI CABLE
(OPTION)
DVD PLAYER, DVIX PLAYER
(not supplied)
POWER CABLE
(OPTION)

16
CHANGING REMOTE CONTROL BATTERY
6
1. Slide and open the battery cover.
2. Insert new battery and ensure that the
polarities are correct when inserting.
(No. CR2025)
3. Slide and close the battery cover.

17
SPECIFICATIONS
7
Screen size
Active area
Resolution
Pixel Pitch
Brightness
Contrast ratio
View angle
Input voltage
Input video system
OSD language
Sound signal output
User controls
Operating temperature
Storage temperature
Dimension
Weight
433.019 mm (17.1”)
367.2(H) x 229.5(V)
1440 x 900
0.255 x 0.255
250cd/m²
800:1
80/80/75/85 (L/R/U/D)
DC 12V
2 composite (NTSC / PAL), HDMI (720p)
7 languages
Max. 3W x 2
MENU / DOWN / UP / LEFT / RIGHT / MODE / POWER
0°C ~ 50°C
-20°C ~ 60°C
418(W)x305(H)x48.5(D) mm
3.54 kg
MM-1750H

18
Screen size
Active area
Resolution
Pixel Pitch
Brightness
Contrast ratio
View angle
Input voltage
Input video system
OSD language
Sound signal output
User controls
Operating temperature
Storage temperature
Dimension
Weight
481.33 mm (18.95”)
408.24(H) x 255.15(V)
1440 x 900
0.2835 x 0.2835
300cd/m²
1000:1
80/80/75/85 (L/R/U/D)
DC 12V
2 composite (NTSC / PAL), HDMI (720p)
7 languages
Max. 3W x 2
MENU / DOWN / UP / LEFT / RIGHT / MODE / POWER
0°C ~ 50°C
-20°C ~ 60°C
464(W)x330(H)x48.5(D) mm
4.33 kg
Screen size
Active area
Resolution
Pixel Pitch
Brightness
Contrast ratio
View angle
Input voltage
Input video system
OSD language
Sound signal output
User controls
Operating temperature
Storage temperature
Dimension
Weight
546.86 mm (21.53”)
476.64(H) x 268.11(V)
1920 x 1080
0.24825 x 0.24825
300cd/m²
1000:1
85/85/80/80 (L/R/U/D)
DC 12V
2 composite (NTSC / PAL), HDMI (1080p)
7 languages
Max. 3W x 2
MENU / DOWN / UP / LEFT / RIGHT / MODE / POWER
0°C ~ 50°C
-20°C ~ 60°C
520(W)x370(H)x48.5(D) mm
5.12 kg
MM-1950H
MM-2250H

19

INSTRUCTION MANUAL