Campania International Autumn Leaves User manual

FT
-
234 AutumnLeavesFountain
R
evised
April 6, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
Approx.10”length of1/2”blacknon-kinktubing (1)**
Approx.2”length of5/8”cleartubing (1)**
Hose clamps(3)*
*Hoseclamps maybe used asflow restrictors
** Tubing ispreassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately3gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

FT
-
234 AutumnLeavesFountain
R
evised
April 6, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof190poundswith
anapproximate1/2 square footfootprint.
FT-234B(157 lbs)
28.25”Wx19.5”H
FT-235A(7 lbs)
5.75”Wx8.25”H
1. Position thebasin (FT-234B) where thefountain
is to beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2"non-
kinktubing to thepumpoutlet.
b. Place thestopper aroundthepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough theholeinthe
basin(FT-234B) and outofthechannel.
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriver
orhammer works besttopressthestopper
in place.
5. Coilthepumpcordinthepumphouseandpush
thepumpdownasfarinto thepumphouseas
possible.
6. Securethe5/8"clear tubingtothewater feature
(FT-235A)with ahoseclamp.
7. Place thewater feature(FT-235A)into thebasin
(FT-234B) ensuring thatit is level.
a. Turnthefeatureandcoilthetubingas
you lower it into position.
8. Fillthefountainwithwater.