Campania International FT-103 User manual

F
T
-
103Recife
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
September 13, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK300 pump (1)
#10 stopper(1)
10”length of1/2”BlackNon-Kinktubing(1)**
2”length of5/8”clearvinyltubing (1)**
2”length of1/2"CPVCpipe(1)**
6 ¾”length of1/2”copperpipe
Wedges(2)
Hose clamps(1)*
*Hoseclamps maybe used asflow restrictors
** Tubing ispreassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Device and LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

F
T
-
103Recife
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
September 13, 2018
Assembleyourfountainon alevelsurface capableofholdingaminimumof547 pounds with an approximate8
square footfootprint.
FT-103 D(264lbs)
43”Lx26”Wx8”H
FT-103B (16lbs)
10”Lx7”Wx6”H
FT-103A(96lbs)
34.75”Lx18.5”Wx8”H
FT-103C (1lbs)
3.5”Lx1”Wx4”H
1. Position thebasin (FT-103D)wherethefountain is to be
installed, ensuringthatitislevel.
2. Assemblethefountainplumbing
a. NOTE:Besure to usetheappropriate size adapter
providedwiththepump
b. Attach the1/2"black endofthetubingassemblyto thepump
outlet.
c. Place thestopper around thepump cord approximately8”
fromthepump.
3. Feedthepumpcordall thewaythroughtheholein the
basinandrun thecordthroughthechannelin thebottomto
ensure thefountainwillbelevel.
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Place thepumpcover(FT-103B) over thepump. Ensure it
is placedproperlyandleveled.
6. Position thewater feature(FT-103A)over thepumpcover
(FT-103B).
7. Insertthe1/2"CPVCend ofthetubingassemblyintothe
couplingprotrudingfromthebottomofthewater feature
(FT-103A).
8. Ensure thewater feature iscenteredandleveledon the
pumpcover.
9. Insertthe6¾”length ofcopper pipeinto theCPVC
couplinginsidethewater feature (FT-103A).
10.Place thepumpcoverdoor(FT-103C) in thepumpaccess
openingofthepumpcover.
11. Fillthefountainwithwater.