Campania International FT-41 User manual

F
T
-
4
1
Bisbalos
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
February2
5
,
2017
PumpKitParts List
PK300 pump (1)
#7 stopper(1)
Approx.25”length of½”BlackNon-kinktubing (1)
Approx.12”length of½”BlackNon-kinktubing (1)
3/8”I.D.1/2"O.D.coppersleeve (1)
Approx.1 ½”lengthof3/8”i.d. ½”o.d. copperpipe (1)
Wedges(2)
Hose clamps(5)
*Hoseclamps maybe used asflow restrictors
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#7 Refill Device
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
320 GPH Pump(PF320)
16 FTcord length

F
T
-
4
1
Bisbalos
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
February2
5
,
2017
Assemble yourfountainon alevel surface capable ofholdingaminimumof528 poundswithanapproximate 8squarefootfootprint.
FT-38C (191lbs)
34”Wx8.5”H
FT-41D(26lbs)
25”Wx5”H
FT-41C (66lbs)
27”Wx2.5”H
FT-41B (49lbs)
12”Wx21”H
FT-41A(26 lbs)
12.5”Wx5”H
1. Placethe basin(FT-38C)into position wherethe fountain willbe installed, ensuring
thatitislevel.
2. Assemble the pump kit
a. Usinga hoseclamp, attach the 12” pieceof1/2” non-kinktubingtothe
pump outlet.
b. Placea hose clamp overtheotherendofthe 12” lengthof1/2"non-kink
tubing.
c. Placethe stopperaround the pump cord approximately8” fromthe pump.
3. Feed the pump cordthrough the holeand the channelin the basin (FT-38C).
4. FIRMLY press the stopperintothe hole evenly.
a. Note:Usingthehandle ofascrewdriverorhammerworksbestto pressthe
stopperin place.
5. Placethe pump cover(FT-41D)overthe pump and inthe centerofthe basin (FT-
38C).
6. Centerand levelthe disc (FT-41C)overthe pump cover(FT-41D).
7. Feed the 1/2"non-kinktubingconnected to the pump through the centerofthe disc
(FT-41C).
8. Connectthe looseend ofthe 1/2"non-kinktubingconnected to the pump to the
copperpipe protrudingfromthe bottomofthe urn (FT-41B).
9. Centerand levelthe urn(FT-41B)on the disc(FT-41C).
10. Inside the urn(FT-41B), securethe 25” length of1/2"non-kinktubingto the copper
pipe protrudingfromthe bottom.
11. Connectthe looseend ofthe 25” length of1/2"non-kinktubingtothe top ring(FT-
41A).
12. Fit the top ring(FT-41A)into the urn (FT-41B).
13. Placethe coppersleeve overthe pipe in the top ofthe top ring(FT-41A).
14. Insert the 1 1/2"copperpipe into the sleeve.
15. Fillthe fountain with water.