Campania International Falling Water II User manual

F
T
-
295
FallingWaterI
I
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
December 4, 2017
PumpKitParts List
PK500Pump(1)
12”length1/2”non-kinkhose(1)**
2”length5/8”clearvinyltubing(1)**
2”pieceof1/2”CPVCpipe (1)**
Hoseclamps(3)*
2.8oztube ofsilicone(1)
CopperSpiller
Wedges(3)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesalargefountain cover.
(FTNCOV-LG)
Compatible withRefill Device and LEDkits
(Aspecialstopper isnot required tousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

F
T
-
295
FallingWaterI
I
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
December 4, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof400 poundswithanapproximate 3squarefootfootprint.
FT-288E(37lbs)
28”Lx16.5”Wx3”H
FT-286F(162lbs)
30”Lx20.25”Wx9”H
FT-286C (20lbs)
21”Lx6.75”Wx6.75”H
FT-286A(171lbs)
21”Lx8.25"Wx15.5”H
FT-286B (6lbs)
17.5”Lx4”Wx1”H
FT-286D(4lbs)
7”Lx1.25”Wx4.75”H
1. Position thebase(FT-288E)where thefountainistobeinstalled,
ensuring thatitislevel.
2. Position thebasin (FT-286F) overthebase.
3. Place thepumpcover(FT-286C) alongthebackedgeofthebasin.
4. Assemblethepumpand tubing.
a. Using ahoseclamp, attachthe1/2"non-kink tubingtothe
small pumpoutlet.
b. NOTE: All pumpscomewith 1adapteralreadyinserted
intothe pumpand 2adapterssecured tothe power cord.
i. This fountainusesthe mediumadapter provided.
5. Place thepumpin thecenter ofthepumpcover.
6. Laythepumpcordover theedgeatthebackofthebasin.
7. Place thewater feature(FT-286A)on topofthepumpcover and
ensure thatthepumpcordexits throughtheholeprovided.
8. Insertthe2”CPVCpipeintothecouplingprotruding fromthe
bottomofthewater feature (FT-286A).
9. Using thesiliconeprovided,secure thecopper spiller tothetop lip
ofthewater feature.
10.Place thespiller stopper (FT-286B) insidethetop ofthewater
feature.
11.Place thepumpcoverdoor(FT-286D)inthepumpaccessopening
ofthepumpcover.
12.Letthefountainsit 24hoursbefore fillingwithwater to letthe
siliconedrycompletely.