Campania International La Mirande FT-289 User manual

FT
-
289 LaMirandeFountain
Three people are recommended for the installation ofthisfountain!
R
evised
August21, 2018
PumpKitParts List
PK800 pump (1)
PK500 pump (1)
#10 Double-hole stopper(1)
#7 DrainStopper(1)
2”length of3/4”clearvinyltubing (1)**
2”length of5/8”clearvinyltubing (4)**
12”length of1/2"blacknon-kinktubing (2)**
16”length of1/2"blacknon-kinktubing (1)**
2”length of1/2”CPVCPipe (2)**
Wedges(6)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Device and LEDkits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PP800 - 800GPH Pump~PF525 –525GPH Pump
1
6
FTcord length
forboth
pumps

FT
-
289 LaMirandeFountain
Three people are recommended for the installation ofthisfountain!
R
evised
August21, 2018
Assemble your fountainonalevel surface capable ofholdingaminimumof1030 poundswithanapproximate 7.75 squarefoot
footprint.
FT-281D(572 lbs)
46.5”Lx46.5”Wx11”H
FT-289F(33lbs)
14”Lx14”Wx9.75”H
FT-289E (145lbs)
28”Wx17”H
FT-273C(30lbs)
13.75”Wx9”H
1. Place thebasin (FT-281D)intoposition where thefountain
will beinstalled, ensuringthatitislevel.
a. Note: Checkthatall componentsare leveled as the
fountainisassembled.
2. Assemblethefountainplumbing
a. Attachthe12”length ofnon-kink withthe3/4"clear
tubingtothePK800pumpoutlet.
b. Useahoseclampto attachtheother 12”lengthofnon-
kinktubing to thePK500pumpoutletwith thesmallest
adapter inserted.
c. Place thestopper aroundthepumpcords approximately
8”fromthepump.
3. Feedthepumpcordsall thewaythroughtheholeand channel
in thebasin(FT-281D).
4. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Position thepumphouse(FT-289F) over thepumps inthe
basin(FT-281D).
6. Feedthenon-kinktubingconnectedtothepumps throughthe
topofthepumphouse(FT-289F).
7. Position thelargebowl(FT-289E)over thepumphouse(FT-
289F).
8. InserttheCPVCpipesthatare alreadyattachedtoboth 12”
tubingassembliesintotheCPVCcouplingsinthebottomof
thelargebowl(FT-289E).
a. PK800should beconnectedtothe center pipe.
9. Connecttheclear end ofthe16”length oftubing to the center
pipeprotruding from inside thelargebowl(FT-289E).
10.Position thesmall pedestal(FT-273C) overthecenter ofthe
largebowl(FT-289E).
11.Feedthetubingthrough theholeandtothetopofthesmall
pedestal(FT-273C).

FT
-
289 LaMirandeFountain
Three people are recommended for the installation ofthisfountain!
R
evised
August21, 2018
FT-289B(25lbs)
17”Wx6.25”H
FT-289A(15 lbs)
12.75”Wx7”H
FT-273D(5lbs)
6”Lx2”Wx4.75”H
FT-289G(5lbs)
7”Lx2”Wx6”H
12.Position thesmall bowl(FT-289B)over thesmall pedestal
(FT-273C).
13.Securethelooseendofthenon-kinktubingtothepipe
protruding fromthebottomofthesmall bowl(FT-289B)with
ahoseclamp.
14.Center thesmall bowl(FT-289B) over thesmall pedestal(FT-
273C).
15.Fit thefinial(FT-289A)into thesmall bowl(FT-289B) by
feedingtheprotrudingcopper pipefromthebowlintothehole
in thebottomofthefinial.
16.Place thesmall pedestaldoor(FT-273D)into thesmall
pedestal(FT-273C).
17.Place thepumphousedoor(FT-289G)into thepumphouse
(FT-289F).
18.Fillthefountainwithwater.