Campania International FT-313 User manual

FT
-
313Marais
Wall
Fountain
Two peopleare recommended forthe installationofthisfountain!
Revised
June26, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#10 stopper(1)
#7 DrainStopper(1)
Approx.10”length of1/2”blacknon-kinktubing (1)**
2”length of5/8”clearvinyltubing (1)**
2”length of1/2"CPVCPipe
Hose clamps(2)*
Wedge (2)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately8gallonsof water.
Thisfountain usesalargefountain cover.
(FTNCOV-LG)
Compatible withRefill #10 Device and LEDKits
(A different style stopper mayberequestedfor therefilldevise.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF140 –140GPH Pump
6FTcord length

FT
-
313Marais
Wall
Fountain
Two peopleare recommended forthe installationofthisfountain!
Revised
June26, 2017
Assemble your fountainon alevel surface capable ofholding aminimumof375
poundswithanapproximate2squarefootfootprint.
FT-313A(299lbs)
18.5"Wx16.75"Lx44.75"H
FT-313B(12 lbs)
13.75"Wx11.75"Lx1"H
1. Position thebasin(FT-313A)wherethe
fountainistobeinstalled, ensuring that it is
level.
2. Assemble thepumpand tubing
a. Using ahoseclamp, attachthe1/2”
non-kinktubing tothepumpoutlet.
b. Place thestopper around thepump
cordapproximately8inchesfromthe
pump.
3. Feedthepumpcordthrough thehole inthe
backofthebasin(FT-313A).
4. FIRMLYpressthestopper intothehole
evenly.
a. Note: Using thehandle ofa
screwdriveror hammerworksbestto
press thestopper inplace.
5. InserttheCPVCpipeend ofthe
preassembledtubing intotheCPVC
coupling inthecenter-backofthebasin.
6. Place thepumpcover (FT-313B) over the
pump.
7. Fill thefountainwithwater.