Campania International Concept Birdbath Fountain User manual

FT
-
3
36
ConceptBirdbath
Fountain
PumpKitParts List
PK120-FG PumpandLight Kit (1)*
#7 stopper(1)
2”lengthof PermaGum
8”length1/2”non-kinkhose(1)
O-Ring(1)
Wedges(2)
Hoseclamps(1)
* DoNOTpreassemblethepumpandlightkit
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecure, andwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video. https://youtu.be/J6GjxwVAIyU
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately3-5 gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orother submersible lightsare
suggested forthisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
120 GPH lowvolt Pumpw/separatelight and transformer
10 FTcord length
Revised July 16, 2019
SHOP NOW
SHOP NOW

FT
-
3
36
ConceptBirdbath
Fountain
Assembleyourfountainon alevelsurface capableofholdingaminimumof225 pounds with an approximate1
square footfootprint.
FT-336B (196lbs)
24.75”Wx32.75”H
Light /Spout
FT-336A(3lbs)
5.75”Wx2”H
Pump
PowerCord
Transformer
1. Position thebasin (FT-336B) where thefountain is to beinstalled,
ensuring thatitislevel.
2. Place theO-Ring aroundthe Light /Spout.
a. TheO-Ring willsecure the Light /
Spout in place and allowforthewater
to flowcorrectlyin thefountain.
(IMAGE RIGHT)
3. Attachthenon-kinktubing to the Light /Spout.
4. Feedthe Light /Spout cordandnon-kinktubingthroughtheholeinthe
topofthewaterfeature disc(FT-336A).
5. Carefullypress the Light /Spout with O-Ring into theholeatthetop
oftheholeinthedisc.
a. Note:Useaflatheadscrewdriver orsimilartool topresstheO-
Ringdeeper into theholearoundthe Light/Spout.
6. Attachthe Pump to thenon-kink tubingwithahoseclamp.
7. Feedbothcordsthrough thePVCpipeinthebasin(FT-336B) andout
ofthechannelunderneath.
a. Note1: Bindingthe2cords together withazip tie,
twist tie,orstringmakesthisstepeasier.
b. Note2: Be sure toplace oneplug belowtheother.
If you tryforcing bothplugsthroughatthesame
time, theywill not fit. (IMAGE RIGHT)
8. Using thePermaGumprovided, wraparound eachcord, thenplace it
into thestopper withtheextra PermaGumfillingtheslit andcutting
awayanyexcess.
9. FIRMLY pressthestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer works bestto
press thestopper inplace.
10.Connectthe Pumpand Light /Spout cords to theregular Power Cord.
11.Connectthe Power Cord and Transformer.
Revised July 16, 2019
12.Fill the basin with water.
SHOP NOW