Campbell CPEC200 User manual

CPEC200
Closed Path
Eddy Covariance System
Quick Deploy Guide
February 2016

1. Setup tripod and mount enclosures.
EC100 Enclosure
CPEC200 Enclosure
EC100 Enclosure
Pump Module
CPEC200 Enclosure
Pump Module
Optional Scrub
Module
Leg Mount
Mixed Mast and
Leg Mount

2. Ground tripod and enclosures.
Ground Lug
Grounding Rod

3. Setup tripod or mast with CM20X Crossarm.
Crossarm-To-Pole
Bracket
CM20X Crossarm

4. Mount the EC155 bypass tube.
EC155 bypass tube
Mounting clip

5. Mount gas analyzer and sonic anemometer.
EC155 Gas Analyzer
CM20X Crossarm
EC155 Boom
Adapter
Mounting
Platform
CSAT3A Sonic
Anemometer Head
Leveling Bubble

6. Connect EC155 and CSAT3A to EC100 Electronics.
EC155 Analyzer Cable
EC155 Sample Cell Cable
CSAT3A Cable

7. Connect system plumbing.
Zero Air Tubing
Analyzer Tubing
Pump Tubing
Pump Module Cable
CO
2
Span Gas
Tubing

8. Connect system wiring and insert compact flash (CF) card.
EC100 Power and SDM Cables
System Power Cable
(ensure +12 Vdc power
supply is off)
Insert CF Card

Power Cable
to EC100
EC100 SDM
Cable
Power Cable to +12Vdc
Power Supply (off)
SDM Cable to EC100
EC100
Power Cable