Canada Comfy Chair CST 400 User manual

INSTRUCTION
SHEET
CST 400
DA
B
C
12x 4x40mm screws
2x bolts en 2x nuts
4x washers
part x
A 4
B 2
C 1
D 1
COmfY
ANADA
HAIR
First, assemble table leg 1. Take two parts A and attach the parts B horizontallyto the
parts A. Attachthe plank B as shown in the illustrationbelow. Use two 4x40 mmscrews
for both planks.
AAA
B
B
Table leg 1
Now assemble the table leg 2 . Take two parts A and attach part C horizontally to
the parts A. Attach plank C as shown in the illustrationbelow. Use the two 4x40mm
screws for both planks.
A
AA
outside
C
Table leg 2
C
B
B
STEP 1
STEP 2
SIX STEPS TO THAT COMFY CHAIR FEELING
To gain maximumenjoyment from your ComfyChair furniture, assemblethis side table
according to the instructionsin the sheet. For morestrength and stability,we advise
glueing the jointswith the water resistant wood adhesive supplied.
33cm
8cm
8cm

Join the two table legs together using one bolt on each side. Do not turn the
screws too tight.The table legs should be movable. Do NOT use adhesive on
these joints!
The table legs should be able to movebackwards and forwards. Before placingthe
table top onto the legs, push the legs towards each other and fold them together.
Take tabletop (D) and place it upsidedown on the floor. Now place the table leg
between the two planks attached to the table top. Spread the table legs as far as they
can go. The top of the table legs fits exactly in the inclinationformed by the planks
which are attached to the table top.
D
Turn the table over and set it on the floor. Rock it backwards and forwards until the
table is standing steady on all four legs.
STEP 3
STEP 4
STEP 5
STEP 6
Set your Comfy Side Table beside a comfortable Comfy Chair
and enjoy a snack or a drink!
Comfy Chair
Oosterbrinkweg 5
3774 BW Kootwijkerbroek
Tel : [phone]
Tel : [phone]
E-mail : [e-mail]
Website : www.comfychair.nl