Canada Comfy Chair Plastic Comfy FCC200 User manual

ASSEMBLY INSTRUCTIONS
Step 2:
Now screw the backrest “C” to the underside
of the beams “D” using the bolts and nuts.
Tighten it so that the backrest remains in
position (do not overtighten).
Then take the stopper and place it in the rst
recess and mount the stopper on the top of
the backrest using the 2 bolts and nuts.
Step 3:
Place the chair on the side and tighten the
legs and armrest “E”. The legs by using the
bolt with nut and washer and the handrail by
using a large screw with washer.
Step 4:
Finally, the two slats “F” are mounted on the
front of the chair, in the recesses.
Step 1:
First screw the stopper together by screwing
the slats “B” to “A” using the small screws.
Oosterbrinkweg 5
3774 BW Kootwijkerbroek
Phone: [phone]
E-mail: [email protected]
Website: www.comfychair.nl
Enjoy the outdoor life!
Plastic
Comfy FCC200
2x
2x
4x
2x
2x 2x
2x
B B
A
C
D
B
B
D
C
E
FF
All manuals and user guides at all-guides.com

PACKAGE CONTENTS
Oosterbrinkweg 5
3774 BW Kootwijkerbroek
Phone: [phone]
E-mail: [email protected]
Website: www.comfychair.nl
Enjoy the outdoor life!
Plastic
Comfy FCC200
FASTENING MATERIAL
1x 2x 2x 1x
1x
2x
6x
8x
6x
2x
2x
D
E
C
FAB
12x
All manuals and user guides at all-guides.com