Canada Comfy Chair CCC100 User manual

ASSEMBLY INSTRUCTIONS
Step 2:
Then place the backrest “D” in the recess and rst
screw the top with 4 screws and then the bottom with
4 screws.
Step 3:
Place the chair on the side and mount the front legs
“E” using the carriage bolts with nut. Then the handrail
is secured by the large screws with washer.
Turn the chair on the other side and repeat step 3.
Step 4:
Mount slat “F” between the front legs.
Step 1:
Attach the rear legs “B” to the inside of the seat “A”
using the supplied carriage bolts.
Tip: Use a hammer (or other hard object) to “tap”
the round head of the carriage bolt so that it does
not rotate when the nut is screwed on.
Then slat “C” is mounted on the front of the hind legs
on both sides, at the height of the pre-drilled hole and
tight against the top of the backrest. (see step 3 for the
location of batten “C”).
Enjoy the outdoor life!
Plastic
Comfy CCC100
4x
2x
4x
2x
4x
4x
B
A
B
A
D
C
A
B
C
C
E
D
F
Barneveld
the Netherlands
Phone: + 0031 6 51920965
E-mail: [email protected]
Website: www.comfychair.nl

PACKAGE CONTENTS
Barneveld
the Netherlands
Phone: + 0031 6 51920965
E-mail: [email protected]
Website: www.comfychair.nl
Plastic
Comfy CCC100
FASTENING MATERIAL
2x 2x 1x
1x
8x
2x
12x
8x
2x
Enjoy the outdoor life!
A
B
1x
C D
E
1x
F