canal CJ3000-2 User manual

Contact Details:
Canal Industrial and Trading Company Pty Ltd
P.O. Box 4418, Springfield Lakes, QLD4300, AUSTRALIA
Phone: [phone] Fax: [phone]
Email: [email protected]m.au
Web: www.canal.com.au
CENTRIFUGAL JUICER
CJ3000-2
USERS MANUAL
2001
Canal Industrial and Trading Company Pty Ltd
DISTRIBUTED BY :

CENTRIFUGAL JUICER USERS MANUAL
CJ3000-2
Thank you for purchasing Canal’s CJ3000-2 Centrifugal
Juice Machine! To ensure you enjoy the full benefits of the
Centrifugal Juicer’s capabilities, we have provided this manual.
In it you will find assembly, operating and cleaning instructions,
safety information and a troubleshooting guide. Happy juicing!
Features
Canal’s Centrifugal Juicer extracts delicious fresh juice
from fruits and vegetables. The unique cutting blade design and
powerful 750-watt motor enables effortless juice extraction for all
types of fruit, vegetables and melons.
Continuous juice production
Automatic pulp ejection
Simple, quiet and safe to operate
Parts in Contact with juice are made of stainless steel
Easy to dismantle and clean
Produces up to 1.5 litres of juice in 30 seconds
8 different juice spout positions
Thermal cutout motor protector
The Centrifugal Juicer is the perfect product to cater to
today’s health conscious public.
Troubleshooting Guide
Problem : No power to the Juice Machine.
Check plugged into wall and power switch on.
If Machine has been in prolonged use, the thermal cut out
switch may have tripped. Turn off machine for 15 minutes
and try again.
Problem : Juicer vibrates when operating.
Remove the top cover and clean the basket of any residue.
Ensure that the basket and bottom blade is properly
positioned and that the blade securing nut is securely
fastened.
All servicing should be carried out by suitably qualified
personnel.

Cleaning Instructions
Before disassembling juicer for cleaning, switch
power off and remove power plug from wall.
1) Undo the latches and remove the top cover.
2) Remove the blade securing nut by turning anti-clockwise with
22mm spanner.
3) Remove the bottom blade, basket and juice bowl.
4) Soak in dish washing detergent mixture. 4 Tablespoons of
dish washing detergent in 5 litres of hot water. Rinse parts
before they are reused.
Ensure parts are clean before use.
Do not clean Centrifugal Juicer parts in a dishwasher.
Specifications
CENTRIFUGAL JUICER
46 cm high
30 cm diameter base
29 kg weight
2800 rpm 750 watt motor
Supply Voltage 240 volts 50 Hz
Operating Instructions
WARNING : Only use the plunger provided to push
fruit and vegetables down the main top cover
opening. Keep hands clear of top cover openings.
Never operate juicer unless the top cover is
properly fitted.
1) Once the Centrifugal Juicer is properly assembled, switch the
juicer on and off with the power switch on the juicer base.
Always ensure the switch is in the off position before the
power cord is plugged into the wall.
2) Fruit and Vegetables are fed into the machine through the
large opening in the top cover and pushed down onto the
blade with the plunger. Turn the machine on before putting
fruit or vegetables down the opening in the top cover.
3) The juice is extracted through the tube protruding from the
juice bowl. Pulp is ejected via the pulp duct.
4) After each juicing, the machine should be rinsed by pouring
water through the large opening in the lid to remove any
residue from the basket.
In the event that the machine vibrates, stop the
machine, remove the lid and clean the basket to remove any
residue.
Cut fruit and vegetables to a size that can easily fit into
the main top cover opening. Remove hard seeds from fruit or
vegetables before juicing (eg. Mangoes and Peaches).

Figure 1. Centrifugal Juicer labeled assembly drawing.
Assembly Instructions
WARNING : Do not switch on the machine until it is
properly assembled. Unplug power cable from wall
during assembly.
1) Ensure the machine is positioned on a clean, flat surface.
2) The Juice Bowl should be sitting correctly in one of eight
positions.
3) Fit the basket onto the drive block with both drive pins and
motor shaft protruding through the holes in the bottom of the
basket.
4) Carefully fit the bottom blade so that the drive block pins
protruding through the bottom of the basket fit into the holes
on the back of the blade. Make sure the bottom of the basket
is clean before fitting blade.
5) Make sure the blade-securing nut is securely fastened. Use
a 22mm spanner to tighten this nut.
6) The top cover may be fitted in two positions. Ensure that the
two pins from the bottom latch assembly slot into the holes in
the top cover before clamping the latches down. The latches
should be firm but not over tight. The latches can be
tightened by turning the hooks clockwise and loosened by
turning them anti-clockwise.
7) Insert the pulp extraction duct into position at the side of the
lid. Fasten using the pulp duct fixing screw.