C&T International Sorelle 149 User manual

• The mattress intended for use on the bed shall be a full size crib mattress having minimum
dimensions of 51 5⁄8 in. (1310 mm) in length and 27 1⁄4 in. (690 mm) in width and 4 in. (100 mm)
in thickness, or greater thickness as specified by the manufacturer.
• The minimum age for a child using this toddler bed shall not be less than 15 months and the
maximum weight shall not be greater than 50 lbs. (22.7 kg).
• DO NOT use with less than 12 inches of space between the transitional bed and solid objects such
as a wall or dresser. Child could slide into smaller spaces and suffocate.
• DO NOT place bed near window where cords from blinds or drapes may strangle a child. Child
may fall out of window.
• Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as
hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
• DO NOT use a water mattress.
• DO NOT use casters on toddler bed.
• If guardrail(s) provided must be used to avoid the formation of a gap between the mattress and
the bed that could cause an entrapment.
Failure to follow these warnings and assembly instructions
could result in serious injury or death.
WARNING -
TODDLER BED WARNINGS
!
• Ensure a safe environment for your child by checking regularly, (that every component is properly
and securely in place) before placing your child in the crib. Make sure that all bolts and fasteners
are tight.
CAUTION : ANY MATTRESS USED IN THIS CRIB MUST
BE AT LEAST 27 1/4” (69CM) x 51 5/8” (131 CM) WITH
A THICKNESS NOT EXCEEDING 6” (15CM).

1. Before Toddler Rail assembly, please Remove Footboard(B) and Six(6) Bolts (b)
as per below (Figure 1.)
2.Store crib footboard
Hardware List
in a safe place.
IMPORTANT: MATTRESS SUPPORT MUST BE IN THE LOWEST POSITION
WARNING:
PLEASE DO NOT TIGHTEN THE BOLTS IN ASSEMBLY PROCESS!
Important: In order to properly assemble the toddler bed, carry out the operations in order specified. Failure to assemble the toddler bed in the recommended
make the toddler bed hazardous.
CLEANING & MAINTENANCE
FINALLY CHECK
ENSURE DO NOT
TODDLER BED ASSEMBLY
Figure 1 (C)
(A) (A)
(D)
(F)
(H1)
(H2)
(w)
(h)
(i)
(w)
(h)
(i)
(w)
(h)
(i)
(w)
(h)
(i)
(H)
(B)
149 - TODDLER RAIL FOR MONTGOMERY CRIB INSTRUCTION ( HSY )
H
b
b
b
b
b
b
d
d
d
d
d
d
(w) M6 x 50mm Allen bolt (4 pcs) (y) Alley Key (1 pc)
Flat Washer (4 pcs)
Spring
( h )
( i ) Washer ( 4pcs)