C&T International Sorelle 0299 User manual

Made in AY, Vietnam
Important Information:
Before assembly, read these instructions. Make sure
all preassembled parts are tight. Store this instruction
manual in envelope
for future reference.
TOPPER
Assembiy Instruction
By Sorelle - A Division of C & T International, Inc.
46 Whelan Road, East Rutherford, N.J.07073 U.S.A.
Tel, 201-531-1919 Fax, 201- 531-1920
Website: www.sorellefurniture.com

(a) 1/4” x 32 mm Bolts (5 pcs)
(C) Lift Side Cross Bar (1pc)
(D) Right Side Cross Bar (1pc) (E) Center Rail (1pc)
(A) Back Cross Bar (1pc) (B) Front Cross Bar (1pc)
(e) Allen Key (1 pc)
(g) metal bracket (2 pcs)
(f) Screw 15mm
(4 pcs)
Use 2 pcs Bolt (a) and 2 pcs Washer (b) & 2 pcs lock washer (c) with 4 pcs wooden dowel to attach the
Front Cross Bar(B) to the Lift Side Cross Bar(C) and Right Side Cross Bar (D).
As shown in Figure 1.
Use 3 pcs Bolt (a) and 3 pcs Washer (b) & 3 pcs lock washer (c)
with 6 pcs wooden dowel to attach the Back Cross Bar(B) to
the Lift Side Cross Bar(C) and Right Side Cross Bar (D).
As shown in Figure 2.
Figure 1
page 2
Step 1
Step 2
Assembly parts and hardware
Assembly Changing Top
Assembly Hardware Set
( b) Washer ( 5 pcs) ( c ) LockWasher ( 5 pcs) (d) Wooden dowel (12 pcs)
B
C
D
d
d
d
d
b
c
c
a
C
B
B
C
D
EA
X 2
C
A
d
d
ba
X 3
E
B

Thank you for selecting a C&T product. To ensure the best performance
from your Double Dresser, please read these instructions carefully.
Carefully remove and lay out all parts. Familiarize yourself with all
diagrams. Hardware enclosed in the sack should correspond with
hardware list. Be sure all are included and quantities are correct.
page 3
Figure 3
DRESSER
Tool required
Assembly Changing Top
f
f
X 2
A
A
Step 3