Priming possible: only at strat of a new infusion or start of a new partial infusion.
• Access to P IME phase.
• P IME (each depressing administers 0.5 ml - max 1.5 ml).
• P IME phase finish, infusion start.
• P IME interruption (if in execution).
• Device switch OFF (if P IME carried out).
In case there is a need to prime one or more times during an
already started infusion, the clinician bolus can be used
!"
!%!$&$
%$$ #
• The screen will show all symbols.
• Piston self-adjust.
• Pump switches OFF.
"&"# $!%!!#$
%" %# #&"
!%!
• eversing of the pump piston to the start position.
• eading the number of infusions delivered.
• eset the number of bolus delivered (L0).
Confirm the reset of bolus delivered.
• Pump switches ON.
• Press for 7 seconds.
• Key-pad lock level selection.
• Selection of the lock level.
and
and
depress simultaneously
depress simultaneously
depressed for 8 seconds
press without releasing
button
!%!
)! %$
#$$#
!%!
!" $
Operations feasible only with key-pad unlocked.
• #.::250/36= (from 0.05 to 35 ml/h with the following
increments:- from 0.05 to 10 with ml increments; - from 10
to 35 with 0.05 ml increments).
• #.::250+63;9-69.(from 0.10 to ml with ml
increments).
• #.::250+63;9:24.3242:*:2659(- from 5’ to 1 h with
increments of 5’ - from 1 h to 24 h with increments of 15’).
• #.::250+63;9.95;4+.83242:*:2659(0-12 per h).
Bolus lock-out possibilities: combination of bolus time and
bolus number limitations. The computer always chooses the
programming that results in the smallest bolus volume.
• #.::2507*8:2*3<63;4.(from 1 to 50 ml with
increments of 1 ml - possible only at the begin of a new
infusion).
• .,8.*9.5,8.*9.*+6<.7*8*4.:.89
1st depressing
2nd depressing
3rd depressing
4th depressing
5th depressing
/
and
and
depress simultaneously
depress simultaneously
#"
%$$ # #"
%$$ # #"
%$$ # #"
#"$
$$")!#
!)## "$B#$"%$
/
