Canon imageclass MF229DW User manual

FT6-0878 (000)
Getting Started IMPORTANT For Macintosh users,
please refer to P.13 En
Mise en route IMPORTANT Pour les utilisateurs de Macintosh,
reportez-vous à la p.27 Fr
Introducción IMPORTANTE Para usuarios de Macintosh,
consulte la pág.41 Es
Introdução IMPORTANTE Para usuários Macintosh,
por favor consulte a pág.55 Pt

2
Limited Warranty Notice
Installation Requirements
●MF229dw
●MF227dw
●MF216n
Installing the Printer
14 1/4
"
(360 mm)
12 1/8
"
(308 mm)
1 3/4
"
(45 mm)
5 "
(128 mm)
14 1/2 "
(369 mm)
3 7/8 "
(99 mm)
15 3/8"
(390 mm)
15 3/8
"
(390 mm)
14 1/4
"
(360 mm)
10 5/8"
(270 mm)
1 1/2
"
(39 mm)
5 "
(128 mm)
14 1/4 "
(362 mm)
4 1/4 "
(106 mm)
14 1/4
"
(360 mm)
10 5/8
"
(270 mm)
1 1/2
"
(39 mm)
5 "
(128 mm)
14 1/4
"
(362 mm)
15 3/8
"
(390 mm)

3
Remove all the tape.
1
2

4
Installing the Printer
1
2
1
2
1
2

5
1
2

6
Índice
Contenido
Table des matières
Contents
About the Supplied Manuals ....................................................8
Navigating the Menu and Text Input Method ....................8
Connecting the Power Cord and Turning ON
the Power .........................................................................................8
Specifying the Initial Settings...................................................9
Choosing the Method to Connect the Machine to
the Computer .................................................................................9
Choosing the Method to Connect:
Via Wireless LAN or Other Method..........................................9
Connecting via a Wired LAN................................................... 10
Connecting via a USB Cable ................................................... 10
Connecting via a Wireless LAN
(MF229dw/MF227dw Only).................................................... 10
Setting Wireless LAN (MF229dw/MF227dw Only) ......... 11
Setting a Paper Size and Type................................................ 13
Specifying Initial Fax Settings and Connecting
a Telephone Cable ..................................................................... 13
Perform Useful Tasks ................................................................. 14
Clearing Paper Jams.................................................................. 15
Replacing Toner Cartridge ...................................................... 16
A propos des manuels fournis............................................... 22
Navigation dans le menu et méthode de saisie
du texte.......................................................................................... 22
Branchement du cordon d’alimentation et mise
sous tension ................................................................................. 22
Conguration des réglages initiaux .................................... 23
Choix de la méthode de connexion de la machine
à l’ordinateur................................................................................ 23
Choix de la méthode de connexion :
Méthode via réseau sans l ou autre................................... 23
Connexion via un réseau laire............................................. 24
Connexion via un câbleUSB................................................... 24
Connexion via un réseau sans l (MF229dw/MF227dw
uniquement) ................................................................................ 24
Conguration du réseau sans l (MF229dw/MF227dw
uniquement) ................................................................................ 25
Réglage du format et du type de papier............................ 27
Conguration des réglages de fax initiaux et
connexion d’un câble téléphonique .................................. 27
Procédures utiles........................................................................ 28
Résolution des bourrages papier ......................................... 29
Remplacement de la cartouche d’encre ............................ 30
Acerca de los manuales suministrados .............................. 36
Navegación por el menú y método de introducción
de texto.......................................................................................... 36
Conexión del cable de alimentación y encendido del
interruptor de alimentación................................................... 36
Especicación de la conguración inicial.......................... 37
Selección del método para conectar el equipo al
ordenador ..................................................................................... 37
Selección del método de conexión:
A través de LAN inalámbrica u otro método.................... 37
Conexión mediante una red LAN cableada...................... 38
Conexión con un cable USB.................................................... 38
Conexión mediante una red LAN inalámbrica
(MF229dw/MF227dw sólo)..................................................... 38
Conguración de LAN inalámbrica
(MF229dw/MF227dw sólo)..................................................... 39
Ajuste del tamaño y el tipo del papel................................. 41
Especicación de la conguración inicial de fax y
conexión del cable del teléfono ........................................... 41
Tareas útiles.................................................................................. 42
Eliminación de atascos de papel ..........................................43
Sustitución del cartucho de tóner........................................ 44
Sobre os manuais fornecidos................................................. 50
Navegação pelo menu e pelo método de entrada
de texto.......................................................................................... 50
Como conectar o cabo de alimentação e ligar
a máquina ..................................................................................... 50
Especicação das congurações iniciais............................ 51
Escolha do método de conexão da máquina ao
computador ................................................................................. 51
Escolher o Método para Conectar:
Através de LAN sem o ou outro método......................... 51
Conexão via LAN com o......................................................... 52
Conexão via cabo USB.............................................................. 52
Conexão via LAN sem o
(Somente MF229dw/MF227dw)........................................... 52
Conguração da LAN sem o
(Somente MF229dw/MF227dw).......................................... 53
Conguração do tamanho e do tipo de papel................ 55
Especicação das congurações iniciais do fax e
conexão do cabo telefônico .................................................. 55
Tarefas úteis.................................................................................. 56
Eliminação de obstruções de papel..................................... 57
Substituição do cartucho de toner...................................... 58

7

8
En
Navigating the Menu and Text Input Method
Register Unit Name
Canon-1
A
ApplyA/a/12
Symbol
◀▶
<A/a/12>Back <Apply> #Clear Numeric keys
About the Supplied Manuals
Getting Started (This manual):
Read this manual rst. This manual
describes the installation of the
machine, the settings, and a caution. Be
sure to read this manual before using
the machine.
MF Driver Installation Guide (User
Software and Manuals DVD-ROM):
Read this manual next. This manual
describes software installation.
e-Manual
(User Software and Manuals DVD-
ROM):
Read the desired chapter to suit your
needs. The e-Manual is categorized by
subject to nd desired information easily.
Viewing the e-Manual from the DVD-
ROM
1 Insert the User Software and Manuals
DVD-ROM in your computer.
2 Click [Manuals].
3 Click [e-Manual].
Depending on the operating system you
are using, a security protection message
appears.
If the User Software and Manuals DVD-ROM
has been already inserted in your computer
and [Manuals] is not displayed, remove the
DVD-ROM and insert it again.
Connecting the Power Cord and Turning ON the Power
OFF
1
2
ON
Do not connect the USB cable at this time. Connect it when installing software.
Navigating the Menu
Item selection
Tap an item to select it.
Press to return to the previous
screen.
Setting conrmation
Tap the item.
However, when <Apply> appears, tap
<Apply>.
Text Input Method
Changing entry mode
Tap <A/a/12> to change the entry
mode. You can also press to change
the entry mode.
Entry mode Available text
<A> Uppercase alphabetic letters and
symbols
<a> Lowercase alphabetic letters and
symbols
<12> Numbers
Entering text, symbols, and numbers
Enter with the numeric keys or .
Moving the cursor (Entering a space)
Tap <◀> or <▶> to move the cursor. To
enter a space, move the cursor to the
end of the text, and tap <▶>.
Deleting characters
Delete with . Pressing and holding
deletes all characters.
Entry mode:
<A>
Entry mode:
<a>
Entry mode:
<12>
@ . - _ / 1
ABC abc 2
DEF def 3
GHI ghi 4
JKL jkl 5
MNO mno 6
PQRS pqrs 7
TUV tuv 8
WXYZ wxyz 9
(Not available) 0
(space) - . * # !“ , ; : ^ ` _ = / |‘
? $ @ % & + \ ˜ ( ) [ ] { } < > (Not available)

9
En
Specifying the Initial Settings
Follow the instructions on the screen, set the language and
time. For details on navigating the menu and how to input the
numbers, see“Navigating the Menu and Text Input Method”
( P.8).
Language
English
French
Portuguese
Spanish
English
Current Time Set.
08/08 2014 10:00 AM
(0:00-12:59)
Apply
Choosing the Method to Connect the
Machine to the Computer
●Connecting via a Wired LAN
You can connect the machine to the computer through a
wired router. Use the LAN cables to connect the machine to
the wired router (access point).
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
●Connecting via a USB cable
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
●Connecting via a Wireless LAN
(MF229dw/MF227dw Only)
You can connect the machine to the computer through a
wireless router*. Since it is connected to wireless, no LAN
cables are needed.
* A wireless router (access point), which supports IEEE802.11b/g/n,
is required.
Check if your router has a button
Select from the following two methods depending on the
router (access point) that you are using.
●There is a button.
You can easily setup if your router (access point)
has a button, and if the mark is on the router.
●There is no button.
If there is no button on your router (access point), you
may manually select SSID and complete the settings.
NOTE
• If you are looking to install your new device via a
Wireless Network connection, you can nd a video and
written guides with step-by-step instruction to assist
you through the process from the following URL:
www.usa.canon.com/WirelessHelp
Viewing these guides will ensure a smooth setup of the
device into your existing wireless environment.
Choosing the Method to Connect:
Via Wireless LAN or Other Method
●MF229dw/MF227dw
Do you want to use the
wireless LAN to connect
to the network?
The settings can be
configured later.
Yes No
Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power
1/3
Close
Yes
No
There is a button.
Start from step 4 of ”Push Button Mode”(P.11).
There is no button.
Start from step 4 of ”Setting the Access Point
Manually”(P.11).
Connect to the computer via a wired LAN
Proceed to “Connecting via a Wired LAN”(P.10).
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable”(P.10).
Connect to the computer via a wireless LAN later
Proceed to “Connecting via a Wireless LAN
(MF229dw/MF227dw Only)”(P.10).
●MF216n
Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power
1/3
Close
Connect to the computer via a wired
LAN
Proceed to “Connecting via a Wired
LAN”(P.10).
Connect to the computer via a USB
cable
Proceed to“Connecting via a USB
Cable”(P.10).

10
En
Connecting via a Wired LAN
Checking Before the Setup
Internet Router
or
hub
LAN cable
Are the computer and the router (or hub) properly
connected using a LAN cable?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly congured, you may not use
the wired LAN connection even after completing the following
settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the "Wired LAN" by default.
• When you connect to a network environment that is not
security protected, your personal information could be
disclosed to third parties. Please use caution.
• If you connect through a LAN in the oce, contact your
network administrator.
Connecting via a Wired LAN
1
Connect the LAN cable.
The IP address will be automatically congured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual“Network” ▶“Connecting to a Network” ▶
“Setting IP Addresses”
2
Install the driver and software using the User
Software and Manuals DVD-ROM.
See “For details on the installation procedures:”(P.13).
Proceed to “Setting a Paper Size and Type”(P.13).
Connecting via a USB Cable
Connect the USB cable after installing the MF Drivers and the
MF Toolbox.
NOTE
• If you connected the USB cable before installing the MF
drivers, refer to the MF Driver Installation Guide.
1
Install the driver and software using the User
Software and Manuals DVD-ROM.
See “For details on the installation procedures:”(P.13).
2
Connect the USB cable.
Proceed to “Setting a Paper Size and Type”(P.13).
Connecting via a Wireless LAN
(MF229dw/MF227dw Only)
Checking Before the Setup
Wireless LAN Router
Internet
Is the computer connected to the router (access point)
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly congured, you may not
use the wireless LAN connection even after completing the
following settings.